Eylem DİZMAN TOMAK, Ebru D. ŞAM PARMAK, Şebnem Sevil ARPACI

WATER ABSORPTION, ANTI-SHRINK EFFICIENCY AND DECAY RESISTANCE OF TREATED WOOD BY SILICA BASED SOLUTIONS

In this study, the effect of two different silica (SiO2) based solutions on water absorption, anti-shrink efficiency and decay resistance of Scots pine wood was studied. Sol-gel process was used in order to prepare SiO2 based solutions. One of the SiO2 based solutions (Sol-gel 1) was prepared by using tetraethoxysilane (TEOS) and de-ionized water (TEOS:H2O=1:1/2). The same precursors was used for preparing the other solution (Sol-gel 2) but with a different molar ratio of TEOS:H2O=1:4. Scots pine wood specimens were first vacuum impregnated with the solutions and then cured. The level of water absorption and anti-shrink efficiency were determined with cyclical wetting tests, total of 14 days. Specimens were exposed to brown rot fungus, Coniophora puteana attack according to modified EN 113 standard to determine the best SiO2 based solution for sufficient decay resistance. Leached specimens were also suspected to decay test in order to evaluate any loss in effectiveness in decay resistance due to possibility of silica leaching. Both solutions had similar weight percent gains in wood, around 25%. SiO2 treated specimens decreased water absorption of wood as 20% in comparison with un-treated controls. Anti-shrink efficiency of wood was found as 26% for Sol-gel 1 solution and 35% for Sol-gel 2 solution at the end of the test. Decay resistance of treated specimens was in the range of 63-91% in comparison with controls. Sol-gel 2 solution were found efficacious in suppressing Coniophora puteana attack when no leaching prior the decay test was used, however, Sol-gel 1 solution seemed to be ineffective against fungus attack that exhibited more than 3% weight loss. Leached specimens had higher weight loss than un-leached specimens. The silica in leached wood supposed to be not sufficient to prevent brown rot fungus attack on wood. Results clearly showed that Sol-gel 2 solution had better water absorption and anti-shrink efficiency rates, and decay resistance than Sol-gel 1 solution.

Keywords:

Scots pine, sol-gel decay resistance, anti-shrink efficiency, water absorption,

PDF

___

[1] Temiz A., Terziev N., Jacobsen B., Eikenes M., (2006) Weathering, water absorption, and durability of silicon, acetylated, and heat-treated wood, J Appl Polym Sci 102(5), 4506–4513.
[2] Keplinger T., Cabane E., Chanana M., Hass P., Merk V., Gierlinger N., Burgert I., (2015) A versatile strategy for grafting polymers to wood cell walls, Acta Biomater 11:256–263.
[3] Can A., Palanti S., Sivrikaya H., Hazer B., Stefanı F., (2019) Physical, biological and chemical characterisation of wood treated with silver nanoparticles, Cellulose 26(8), 5075-5084.
[4] Ermeydan M.A., Babacan M., Tomak E.D., (2020) Evaluation of dimensional stability weathering and decay resistance of modified pine wood by in situ polymerization of styrene, Journal of Wood Chemistry and Technology 40(5), 294–305.
[5] Tomak E.D., Ermeydan M.A., (2020) A Natural Flavonoid Modification of Wood Artificial Weathering and Decay Resistance, European Journal of Wood and Wood Products 10.1007/s00107-020-01578-x.
[6] Ermeydan M.A., Kartal Z.N., Tomak E.D., (2019) Effect of process variations of polycaprolactone modification on wood durability dimensional stability and boron leaching, Holzforschung 73(9), 847–858.
[7] Donath S., Militz H, Mai, C., (2004) Wood modification with alkoxysilanes, Wood Science and Technology 38(7), 555-566.
[8] Mai C., Militz H., (2004) Modification of wood with silicon compounds. Treatment systems based on organic silicon compounds—a review, Wood Science and Technology 37(6), 453-461.
[9] Gholamiyan H., Tarmian A., Ranjbar Z., Abdulkhani A., Azadfallah M., Mai C., (2016) Silane nanofilm formation by sol-gel processes for promoting adhesion of waterborne and solvent-borne coatings to wood surface, Holzforschung 70(5), 429-437.
[10] Sebe G., Tingaut P., Safou-Tchiama R., Petraud M., Grelier S., De Jeso B., (2004) Chemical reaction of maritime pine sapwood (Pinus pinaster Soland) with alkoxysilane molecules: A study of chemical pathways, Holzforschung 58(5), 511-518.
[11] Tanno F., Saka S., Yamamoto A., Takabe K. (1998) Antimicrobial TMSAH-added wood-inorganic composites prepared by the sol-gel process, Holzforschung 52(4), 365-370.
[12] Saka S., Tanno F., (1996) Wood-Inorganic Composites Prepared by Sol-Gel Processing VI. Effects of a property-enhancer on fireresistance in SiO2-P2O5 and SiO2-B2O3 wood-inorganic composites, Mokuzai Gakkaishi 42, 81–86.
[13] Sam E.D., Urgen M., Tepehan F.Z., Gunay V., (2004) Self cleaning photoactive TiO2 coatings on SLS glasses by sol-gel dip coating, Key Engineering 264, 407-410.
[14] EN 113 (1997) Wood preservatives. Test method for determining the protective effectiveness against wood-destroying basidiomycetes. Determination of toxic values.
[15] Ermeydan M.A., Cabane E., Masic A., Koetz J., Burgert I., (2012) Flavonoid insertion into cell walls improves wood properties, ACS Applied Materials & Interfaces 4(11), 5782-5789.
[16] Donath S., Militz H., Mai C., (2006) Creating Water-Repellent Effects on Wood by Treatment with Silanes, Holzforschung 60, 40–46.
[17] Brinker C.F., Scherer G.W., (1990) Sol-gel-science. Academic, San Diego, USA.
[18] Goethals P., Stevens M., (1994) Dimensional stability and decay resistance of wood upon modification with some new type chemical reactants, International Research Group on Wood Preservation IRG/WP 94–40028.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv