ENTRANSY ANALYSIS OF AN IRREVERSIBLE BRAYTON CYCLE AND DEFINING ITS RELATIONS WITH OTHER THERMODYNAMICAL PARAMETRES

In this study, entransy, which is relatively new thermodynamic parameter, was investigated for irreversible Brayton cycle. Entransy dissipation is the destruction occurring heat transfer potential. Entransy analysis was conducted numerically and results were compared with the work output, exergy output, energy and exergy efficiencies, entropy generation and the internal irreversibility parameter. Even if optimum values for other parameters are determined, it is seen that entransy dissipation rate is very high. Work output decreases with irreversibilities and its value ranges from 339.41 (kW) to 222.36 (kW). Similarly, entransy dissipation decreases with irreversibilities and its value is reduced from 740795 (kWK) to 606382 (kWK).

Keywords:

Entransy transfer, entransy dissipation, thermodynamic parameters, irreversibility, entropy generation brayton cycle,

PDF

___

[1] Wang W., Cheng X.T., Liang X.G., “Entransy theory for the optimization of heat transfer – A review and update”, Int J Heat Mass Transfer, 63, 65-81, 2013.
[2] Bergles A.E., “Heat transfer enhancement – the maturing of second-generation heat transfer technology”, Heat Transfer Eng,, 18 , 47–55, 1997.
[3] Webb R.L., “Principles of Enhanced Heat Transfer”, John Wiley & Sons, NewYork, 1994.
[4] Guo ZY, Zhu HY, Liang XG., “Entransy—a physical quantity describing heat transfer ability”, Int J Heat Mass Transfer ,50, 2545–56, 2007.
[5] Cheng XT, Liang XG., “Entransy loss in thermodynamic processes and its application”, Energy, 44,964–72, 2012.
[6] Xu MT., “The thermodynamic basis of entransy and entransy dissipation”, Energy, 36, 4272-7, 2011.
[7] Cheng XT, Wang WH, Liang XG., “Entransy analysis of open thermodynamic systems”, Chin Sci Bull. , 57, 2934–40, 2012.
[8] Wang W, Cheng XT, Liang XG., “Entropy and entransy analyses and optimizations of the Rankine cycle”, Energ Convers Manage, 68, 82-88, 2013.
[9] Liu W, Liu ZC, Jia H, et al., “Entransy expression of the secondd law of thermodynamics and its application to optimization in heat transfer process” Int J Heat Mass Transfer,54, 3049–59, 2011.
[10] Chen LG, Wei SH, Sun FR., “Constructal entransy dissipation minimization for ‘volume-point’”, heat conduction, J Phys D, Appl Phys, 41, 195506, 2008.
[11] Xie ZH, Chen LG, Sun FR., “Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective” Sci China Ser E, Tech Sci, 52, 3413–504, 2009.
[12] Chen Q, Ren JX., “Generalized thermal resistance for convective heat transfer and its relation to entransy dissipation”, Chin Sci Bull, 53, 3753–61, 2008.
[13] Cheng XT, Liang XG., “Entransy flux of thermal radiation and its application to enclosures with opaque surfaces”, Int J Heat Mass Transfer, 54,269–78, 2011.
[14] Cheng XT, Xu XH, Liang XG., “Radiative entransy flux in enclosures with nonisothermal or non-grey, opaque, diffuse surfaces and its application”, Sci China,Tech Sci,54,2446–56, 2011.
[15] Cheng XT, Liang XG., “Computation of effectiveness of two-stream heat exchanger networks based on concepts of entropy generation, entransy dissipation and entransy- dissipation-based thermal resistance”, Energ Convers Manage, 58,163–70, 2012.
[16] Cheng XT, Xu XH, Liang XG., “Application of entransy to optimization design for parallel thermal network of thermal control system in spacecraft” Sci China, Tech Sci, 54, 964–71, 2011.
[17] Qian XD, Li Z, Li ZX., “Entransy-dissipation-based thermal resistance analysis of heat exchanger networks”, Chin Sci Bull., 56, 3289–95, 2011.
[18] Cheng XT, Liang XG, Guo ZY.. “Entransy decrease principle of heat transfer in an isolated system”, Chin Sci Bull, 56, 847e54, 2011.
[19] Cheng XT, Liang XG, Xu XH., “Microscopic expression of entransy”, Acta Phys Sin, 60, 060512, 2011.
[20] Xie ZH, Chen LG, Sun FR., “Constructal optimization on T-shaped cavity based on entransy dissipation minimization” Chin Sci Bull, 54, 4418-27, 2009.
[21] Xiao QH, Chen LG, Sun FR., “Constructal entransy dissipation rate minimization for “disc-to-point” heat conduction” Chin Sci Bull, 56,102-12, 2011.
[22] Wu J, Liang XG. “Application of entransy dissipation extreme principle in radiative heat transfer optimization” Sci China Ser E-Tech Sci, 51, 1306-14, 2008.
[23] Xia SJ, Chen LG, Sun FR., “Optimization for entransy dissipation minimization in heat exchanger” Chin Sci Bull ,54,3572-8, 2009.
[24] Li XF, Guo JF, Xu MT, “Cheng L. Entransy dissipation minimization for optimization of heat exchanger design”, Chin Sci Bull ,56,2174-8, 2011.
[25] Qian XD, Li ZX. “Analysis of entransy dissipation in heat exchangers”. Int J Thermal Sci, 50, 608-14, 2011.
[26] Chen L, Wei S and Sun F., “Constructal entransy dissipation rate minimization of a disc”, Int. J. Heat Mass Transfer , 54, 210-216, 2011.
[27] Chen L, Wei S and Sun F. “Constructal entransy dissipation rate minimization of round tube heat exchanger cross-section”, Int. J. Them. Sci., 50, 1285- 1292, 2011.
[28] Wei SH, Chen LG, Sun FR. “Constructal optimization of discrete and continuous-variable cross-section conducting path based on entransy dissipation rate minimization.”, Sci. China – Technol. Sci., 53, 1666–1677, 2010.
[29] Wei SH, Chen LG, Sun FR., “Constructal entransy dissipation minimization for ‘volume-point’ heat conduction without the premise of optimized last order construct”, Int. J. Exergy, 7, 627–639, 2010.
[30] Xia SJ, Chen LG, Sun FR., “Optimal paths for minimizing entransy dissipation during heat transfer processes with generalized radiative heat transfer law”, Appl. Math. Model., 34, 2242–2255, 2010.
[31] Xiao QH, Chen LG, Sun FR., “Constructal entransy dissipation rate minimization for a heat generating volume cooled by forced convection”, Chin. Sci. Bull., 56, 2966–2973, 2011.
[32] Xiao QH, Chen LG, Sun FR., “Constructal entransy dissipation rate minimization for heat conduction based on a tapered element”, Chin. Sci. Bull., 56, 2400–2410, 2011.
[33] Xiao QH, Chen LG, Sun FR., ”Constructal entransy dissipation rate minimization for umbrella-shaped assembly of cylindrical fins”, Sci. China – Technol. Sci., 54, 211–219, 2011.
[34] Xie ZH, Chen LG, Sun FR., “Constructal optimization for geometry of cavity by taking entransy dissipation minimization as objective”, Sci. China Ser. E – Technol. Sci., 52, 3504–3513, 2009.
[35] Xie ZH, Chen LG, Sun FR., “Comparative study on constructal optimizations of T-shaped fin based on entransy dissipation rate minimization and maximum thermal resistance minimization”, Sci. China – Technol. Sci., 54, 1249–1258, 2011.
[36] Baierlein R., Thermal Physics (Cambridge, Cambridge University Press), 1999.
[37] Ge Y., Chen L., Sun F., Wu C., “Thermodynamic simulation of performance of an Otto cycle with heat transfer and variable specific heats for the working fluid”, Int. J. Therm. Sci. , 44, 506–511, 2005.
[38] Ge Y., Chen L., Sun F., Wu C., “The effects of variable specific-heats of the working fluid on the performance of an irreversible Otto cycle”, Int. J. Exergy, 2, 274 – 283, 2005.
[39] Chen L., Ge Y., Sun F., Wu C., “Effects of heat transfer, friction and variable specific-heats of a working fluid on performance of an irreversible Dual cycle”, Energy Convers. Manage, 47, 3224–3234, 2006.
[40] Al-Sarkhi A., Jaber J.O., Abu-Qudais M., Probert S.D., “Effects of friction and temperature-dependent specific-heat of the working fluid on the performance of a Diesel- engine”, Appl Energy, 83, 153 – 165, 2006.
[41] Y.Ge, L.Chen, Sun F., “Finite- time thermodynamic modeling and analysis for an irreversible dual cycle”, Math Comput Model, 50, 101-108, 2009.
[42] Y.Ge, L.Chen, Sun F., “Finite- time thermodynamic modeling and analysis for of an irreversible Diesel cycle”, P I Mech Eng D-J Aut, 222, 887-894, 2008.
[43] Y.Ge, L.Chen, Sun F., “Finite- time thermodynamic modeling and analysis for of an irreversible Otto- cycle”, Appl Energy, 85, 618-624, 2008.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv