___

• [1] WHO (1994). IPCS Environmental health criteria for phenol first draft prepared by Montizan GK, Published by WHO. Printed in Finland.
• [2] Shrivastava, V.C., Swamy, M.S., Mall, I.D., Prasad, B., & Mishra, I.M. (2006). Adsorptive removal of phenol by bagasse fly ash and activated carbon: equilibrium, kinetics and thermodynamics. Colloid Surf. A., 272, 89–104.
• [3] Ahmaruzzaman, M. (2008). Adsorption of phenolic compounds on low-cost adsorbents: a review, Adv. Colloid Interface Sci., 143(1), 48-67.
• [4] Sunil, J., Kulkarni., D., & Jayant, P.K. (2013). Review on research for removal of phenol from wastewater. International Journal of Scientific and Research Publications, 3, (4).
• [5] Song, X., Zhang, Y., Yan, C., Jiang, W., & Chang, C. (2013). The Langmuir monolayer adsorption model of organic matter into effective pores in activated carbon. Journal of Colloid and Interface Sci., 389(1), 213–219.
• [6] Kadhimand, F., & Al-Seroury F.A. (2012). Characterization the removal of phenol from aqueous solution in fluidized bed column by rice husk adsorbent, Research Journal of Recent Sciences, (1), 145–151.
• [7] Menkiti, M.C., Abonyi, M.N., & Aniagor, C.O. (2018). Process equilibrium, kinetics and mechanisms of ionic-liquid induced dephenolation of petroleum effluent. Water Conserv. Sci. Eng., 3, 205–220. https ://doi.org/10.1007/s4110 1-018-0052-8.
• [8] Abonyi, M. N., Aniagor, C. O., & Menkiti, M. C. (2019). Effective Dephenolation of Effluent from Petroleum Industry Using Ionic-Liquid-Induced Hybrid Adsorbent. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-019-04000-8
• [9] Chatterjee, S., Kumar, A., Basu, S., & Dutta, S. (2012). Application of response surface methodology for methylene blue dye removal from aqueous solution using low-cost adsorbent. Chemical Engineering Journal, 181 – 182, 289 – 299.
• [10] Mohammad, Y.S., Shaibu-Imodagbe, E.M., Igboro, S.B., Giwa, A., & Okuofu, C.A. (2014). Modelling and Optimization for Production of Rice Husk Activated Carbon and Adsorption of Phenol. Journal of Engineering. http://dx.doi.org/10.1155/2014/278075
• [11] Wilkes, J. S., & Zaworotko, M. J. (1992). Air and water stable 1-ethyl-3-methylimidazolium based ionic liquids, J. Chem. Soc., Chem. Commun., 8(3), 965-967.
• [12] Aniagor C.O. & Menkiti M.C. (2018). Kinetics and mechanistic description of adsorptive uptake of crystal violet dye by lignified elephant grass complexed isolate. Journal of Environmental Chemical Engineering. 6, 2105–2118. https://doi.org/10.1016/j.jece.2018.01.070
• [13] Zainudin, N.F., Lee, K.T., Kamaruddin, A.H., Bhatia, S., & Mohamed, A.R. (2006). Study of adsorbent prepared from oil palm ash (OPA) for the gas desulphurisation. Separation purification technology, 97, 734-739.
• [14] Stuart, B., (2004). Infrared Spectroscopy: Fundamentals and Applications. Hoboken, New Jersey: John Wiley & Sons
• [15] Madejova, J. (2003). FTIR techniques in clay mineral studies. Vibrational Spectroscopy, 31, 1-10.
• [16] Chang, R. (2005). Physical Chemistry for the Biosciences, University Science Books, NY, USA.
• [17] Basu, J.K, Monal, D., & Pinaki, G. (2012). Chitosan-immobilized Optimization of electrocoagulation process for removal of phenol. Archives of Applied Science Research, 4(2), 1053 - 1060.
• [18] Liu, X; & Pinto, N.G. (1997). Ideal adsorbed phase model for adsorption of phenolic compounds on activated carbon. Carbon, 35(9), 1387-1397. https://doi.org/10.1016/S0008-6223(97)00092-4
• [19] Sathishkumar, M., Binupriya, A.R., Vijayaraghavan, K., & Yun, S. I. (2007). Two and three-parameter isothermal modelling for liquids-phase sorption of procion blue HB by inactive mycelia biomass of panus fulvus. Journal of chemical technology and biotechnology, 82, 389-398.
• [20] Bayraktar, E. (2001). Response surface optimization of the separation of DL-tryptophan using an emulsion liquid membrane. Process Biochem., 37, 169–175.
• [21] Dorra, T., Soumaya, H., Islem, L., & Bachir, H. (2017). Response surface methodology for optimization of phenol adsorption by activated carbon: Isotherm and kinetics study. Indian journal of chemical technology, 24, 239-255.
• [22] Chandana, L.M., Sridevi, V., Narasimha, R.M., & Swamy, A. (2011). Optimization of phenol degradation from pseudomonas aeruginosa (ncim 2074) using response surface methodology. International Journal of research in pharmacy and chemistry. 1(4).
• [23] Ray, S., Lalman, J.A., & Biswas, N. (2009). Using the Box-Benkhen technique to statistically model phenol photocatalytic degradation by titanium dioxide nanoparticles. Chemical Engineering Journal, 150, 15–24.
• [24] Noordin, M.Y., Venkatesh, V.C., Sharif, S., Elting, S., & Abdullah, A. (2004). Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Mater. Process Technology, 145, 46–58.