Hakan KALELİ

DESIGN OF MODERN UNIVERSAL TRIBOMETER WITH ROTATING AND RECIPROCATING MOVEMENT

This paper considers construction and advantage of modern tribometer conception. Universal Tribometer enables simulation of different contact and test types. Special device enables pin-on-disc (rotational), ball-on-disc and linear reciprocating test types. The main purpose of tribometer was investigation of friction and wear of different materials with or without lubricant according to appropriate standards. Tribometer concept and design solution of same subassemblies that provide defined requests fulfill were described in details. System design and construction with data measurement information are specially described.

Keywords:

Tribometer, design universal.,

PDF

___

[1] Bharat Bhushan, “Principles and Applications of Tribology”, A Wiley-Interscience Publication, John Willey&Sons, Inc., 1999.
[2] CSEM Insruments, Advanced Mechanical Surface Testing, “Modifield Pin-on-disc Tribometer for controlled lubricant studies”, Applications Bulletin, No. 4 July 1997.
[3] Ivkovic, B., Tadic, B., Machinability test on tribometer “Pin on Disc”, International Conference on Tribology, BALKANTRIB 96, Thessaloniki, Greece, 1996.
[4] Tadic, B., Ivkovic, B., Todorovic, P., Theoretical Basis of Pin and Block Carrier design at Tribometer Tpd - 2000., Tribology in industry, (53-56), volume 24, N03&4, Kragujevac 2002.
[5] N. Marjanovic, B. Ivkovic, B. Stojanovic, M. Blagojevic, “Disk on Disk Test of Gear Pair Power Losses”, Tribology in Industry, vol. 32, No. 4, pp. 10-16, 2010.
[6] CSEM Insruments, Advanced Mechanical Surface Testing, “Special Issue: Automotive Applications”, Applications Bulletin, No. 16 April 2001.
[7] Kris De Moerlooze, Farid Al-Bender, Hendrik Van Brussel, “An experimental study of ball on-flat wear on a newly developed rotational tribometer”, Wear 271 (2011) 1005– 1016.
[8] J.M. Thorp, “A novel tri-pin-on-disc tribometer designed to retain lubricants”, Tribology International, April 1981, 121-125.