Otomobil Kabini içerisindeki Hava Hızının Isıl Konfora Etkisinin İncelenmesi

The aim of this study is to evaluate the effect of air velocity on thermal comfort during heating period in an automobile cabin with experiments. In the evaluation of comfort in automobiles, in general temperature, humidity, air velocity and radiant temperature measurements are taken. In the study, ambient temperature, relative humidity, mean radiant temperature and mean skin temperature of the driver inside the automobile cabin during heating for different vent air mass flow rates were measured in a parked car. Subjective survey was performed during the experiments to the driver. The results for different vent air mass flow rate values were compared with answers taken from the subject and discussed.

Effect of Air Velocity on Thermal Comfort in an Automobile Cabin

-

___

  • AYBERS, N. 1978. Isıtma, havalandırma ve iklim tesisleri. Uçer Matbaacılık, 9-25s.
  • ANONİM. 1993. ASHRAE handbook – Fundamentals, chapter 8. Atlanta: American Society of Heating, Refrigeration and Air-Conditioning Engineers. 29p.
  • ANONİM. 1993 (b). ASHRAE handbook – Fundamentals, chapter 37. Atlanta: American Society of Heating, Refrigeration and Air-Conditioning Engineers. [4] ANONİM. 1995. ISO 7730, Moderate thermal environments – Determination of the PMV and PPD indices and specification of the conditions for thermal comfort. International Organization for Standardization, Geneva. [5] DAANEN, H.A.M., E. van de VLIERT and X.
  • HUANG. 2003. Driving performance in cold, warm,
  • and thermoneutral environments. Applied Ergonomics, 34: 597-602.
  • AROUSSI, A. and S. AGHIL. 2000. Characterisation of the flow field in a passenger car model. Optical Diagnostics in Engineering, 4 (1): 1-15.
  • BURCH, S.D., J.T. PEARSON and S. RAMADHYANI. 1991. Experimental study of passenger thermal comfort in an automobile under severe winter conditioning. ASHRAE Transactions, 97: 239-246. [8] BURCH, S.D., S. RAMADHYANI and J.T. PEARSON. 1991. Analysis of passenger thermal comfort in an automobile under severe winter conditioning. ASHRAE Transactions, 97: 247-257.
  • ISO 9920. 1993. Ergonomics: Estimation of the Thermal Characteristics of a Clothing Ensemble. International Standards Organisation, Geneva.
  • ISO 7726, 1998. Ergonomics of the thermal environment -Instruments for measuring physical quantities. Standardization.
  • UEDA, M., Y. TANIGUCHI, A. ASANO, M. MOCHIZUKI, T. IKEGAMI and T. KAWAI. 1997. An automobile heating, ventilating and air conditioning system with a neural network for controlling the thermal sensation felt by a passenger. JSME, 40 (3): 469-477. Organization for
Sakarya University Journal of Science-Cover
  • Yayın Aralığı: Yılda 6 Sayı
  • Başlangıç: 1997
  • Yayıncı: Sakarya Üniversitesi
Sayıdaki Diğer Makaleler

Farklı dış duvar yapıları için optimum ısı yalıtım kalınlığı tespitinin ekonomik analizi

Ali Etem GÜREL, Zafer CİNGİZ

Bafa Gölü'ndeki Toplu Balık Ölümleri Üzerine Bir Araştırma

Murat YABANLI, Necla TURK, Ersin TENEKECİOGLU, Ramazan ULUDAG

Trabzon ve civarındaki deprem ve patlatma verilerinin birbirinden ayırt edilmesi

Ömer Faruk KARTAL, Gündüz HORASAN

Klebsiella pneumonıae Ve Klebsiella oxytoca Bakterilerinde Kombine Disk Yöntemi İle Genişlemiş Spektrumlu Beta Laktamazın Belirlenmesi

Ebru YILMAZ, Güven URAZ

Fibromiyalji sendromunun teşhisinde kullanılan laboratuar testlerinin sempatik deri cevabı parametreleriyle desteklenerek teşhis doğruluğunun arttırılması

Özhan Özkan, Murat Yıldız, Etem Köklükaya

Nöral ve bulanık Sistem Hücre Aktivasyon yaklaşımları ve FPGA'da donanımsal gerçeklenmesi

Mehmet Ali ÇAVUŞLU, Cihan KARAKUZU

Otomobil Kabini içerisindeki Hava Hızının Isıl Konfora Etkisinin İncelenmesi

Mehmet Özgün KORUKÇU, Muhsin KILIÇ

Blast Verisinin Dahili Analizi ile Elektron-Döteron Saçılmasından Değişmez Kütle Spektrumunun Eldesi

Barış Tamer Tonguç, Ricardo Alarcon, Mehmet Bektaşoğlu, Şule Çitçi, Asiye Demirağ

Su Yosunu (Ulva lactuca)'nun Toprağın Su Tutma Kapasitesine Etkisi

Ömer Hulusi DEDE, Gülgün DEDE, Serkan ÖZDEMİR

Mimarlık Öğrencilerinin Malzeme Bilgisinin Arttırılmasında Fabrika Gezilerinin Rolü: Metodolojik Bir Analiz

Dr. Z. Sevgen PERKER