The characterization of a bauxite waste from the Bayer process

The Bayer process for the alumina from bauxite produce a high quantity of waste in the form of mud. This waste -red mud- present serious problems on environmental pollution. A possible solution for these wastes would be the utilization at the ceramic industry. Because of this, the characterization of a bauxite waste has been performed using various techniques. The particle size distribution lied between 1 and 30 $\mu m$. The mean density was 2.85 g.cm3. The total weight loss was found as 7,07 % at 900°C from TG and DTG curves. The results of XRD investigations showed that the red mud consist of hematite and sodium aluminium silicate hydrate crystalline phases.

___

  • [ 1] Şeker. S. ,Çerezci.O., "Radyasyon Kuşatması: Elektrik ve Nükleer Enerjinin Sağlığımıza Etkileri", Boğaziçi Üniversitesi Yayınevi, İstanbul, 2000 [ 2] Şeker.S. ,Çerezci.O., "Çevremizdeki Radyasyon ve Korunma Yöntemleri", Boğaziçi Üniversitesi Yayınevi, İstanbul, 1997
  • [3] Chan. K., Cleveland. R. F., Means. D. L., "Evaluating Compliance With Fcc Guidelines For Human Exposure To Radiofrequency Electromagnetic Fields" Oet Bulletin 65, Washington, 1997
  • [4] Adair.E.R., "Microwawes and Thennoregulation", New York Academic Pres, New York 1983
  • [5] Gandhi., O. P.,"Current Induced in A Human Being For Plane - Wave Exposure Conditions (0-50 MHz) And For RF sealers", IEEE Trans. On Biyomedical Engineering, Vol BE-33 No. 8 1986