Noktasal Yükleme Etkisindeki Üç Boyutlu İnsan Kalça Ekleminin Sonlu Elemanlar Yöntemiyle İncelenmesi

In this study, a three dimensionally modeled human hip joint with and without prosthesis was investigated by using finite element method. In scope of the study, 3 different types of cemented prosthesis namely; Charnley, Muller and Hipokrat were used. After preparing the solid models of the hip joint, the models were exported to Ansys Workbench program in order to create 3-D finite element models of the hip joint. The finite element analysis were then pursued for walking and stair climbing activities using concentrated force conditions applied statically. The von-Mises stresses and strains on the cortical and trabecular layers of bone, prosthesis and bone cement were determined at the end of the finite element analysis and compared to each other.

The Investigation Of A 3-D Human Hip Joint Under The Effect Of Concentrated Force By Using Finite Element Method

-

___

  • Heller, M.O., Bergmann, G., Kassi, J.P., Claes, L., Haas, N.P. ve Duda, G.N., Determination of muscle loading at the hip joint for use in pre-clinical testing, Journal of Biomechanics, 38 (2005) 1155-1163.
  • Herberts, P., Malchau, H., Long-term registration has improved the quality of hip replacement:a review of the Swedish THR Register comparing 160000 cases., Acta Orthop Scand, 71 (2000) 111-121.
  • Stolk, J., Verdonschot, N. ve Huiskes, R., Stair Climbing is More Detrimental to the Cement in Hip Replacement than Walking, Clinical Orthopaedics and Related Research, 405 (2002) 294-305.
  • URL-1- www.biomedtown.org, 15.08.2011
  • URL-2- www.ansys.com, 30.11.2011
  • Viceconti, M., Casali M., Massari B., Cristofolini, L., Bassini S. ve Toni, A., The 'Standardized femur program'. Proposal for a reference geometry to be used for the creation of finite element models of the femur, J. Biomechanics, 29 (1996) 1241.
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi-Cover
  • ISSN: 1301-4048
  • Yayın Aralığı: 6
  • Başlangıç: 1997
  • Yayıncı: Sakarya Üniversitesi Fen Bilimleri Enstitüsü
Sayıdaki Diğer Makaleler

İnsan Bacak Hareketleri İçin Prototip Dış İskelet Robotik Sisteminin Mekanik Tasarımı Ve Hareket Verilerinin Yapay Sinir Ağları İle Elde Edilmesi

Evren Meltem TOYGAR, Ahmet ÖZKURT, Zeki KIRAL, Mehmet ÇAKMAKÇI, Binnur Gören KIRAL, Yavuz ŞENOL, Taner AKKAN, Yusuf ARMAN, Tolga OLCAY, Necati Mutlu DAĞHAN, Murat KARAGÖZ

Çift Katmanlı Kemik Modeli İle Diz Protezi Dizilimi Eldesi Ve Sonlu Elemanlar Analizi İle Değerlendirilmesi

İsmail Hakkı KORKMAZ, İrfan KAYMAZ, Fatih MEDETALİBEYOLU, Ömer Selim YILDIRIM

Malzeme, Ergonomi Ve Biyomekanik İlişkisi

Mehmet ÇALIŞKAN, Fehim FINDIK

Servikal Omurga Aksiyel Rotasyon Gonyometre Dizaynı

Emin Ulaş Erdem, Filiz Can

Dinamik Ayaklı Diz Altı Protezi Kullanan Amputelerde Yürüyüş Simetrisinin İncelenmesi

Yasin YURT, Gül ŞENER, Özlem ÜLGER, Semra TOPUZ, Kezban BAYRAMLAR, Fatih ERBAHÇECİ

Yüksek Tibial Osteotomisinin Medial Menisektomi Uygulanan Dizlerde Tıbıa Kıkırdağı Üzerındeki Yüklenmeyi Azaltıcı Etkisi: Sonlu Elemanlar Model Çalışması

Halil Atmaca

Tibia Kıkırdağı Üzerindeki Yük Değişimlerine Alt Ekstremite Mekanik Aksın Etkisi: Sonlu Eleman Model Çalışması

Halil Atmaca

Aktif Protezler İçin Biyomekanik Enerji Üreteci Tasarımı

Akın Oğuz KAPTI, Erkul KURULAY

İnsan Uyluk Kemiği Ve Kalça Protezinin Gerilme Ve Deplasman Davranışının Kıyaslanması

Fatih ATİK, Arif ÖZKAN, İlyas UYGUR

Hemşirelik Öğrencilerinde İnternet Bağımlılığının Kişilik Özellikleri Ve Zaman Yönetimi İle İlişkisi

Dilek KÖSE, Nursan ÇINAR, Funda AKDURAN