Normal Stress Analysis In An Infinite Elastic Body With A Locally Curved Carbon Nanotube

In this paper, the results of normal stress values in unidirectional fibrous composite with locally curved carbon nanotube (CNT) were obtained as much as the second approximation and the obtained results were analyzed.The boundary form perturbation method is used to solve the problem. This investigation is made within the framework of a piecewise homogeneous body model by using the three-dimensional geometrically nonlinear exact equations of elasticity theory. The concentration of carbon nanotubes in the composite is assumed to be low and the interaction between them is neglected. Numerous results are obtained for the normal stress distribution and the effect of the problem parameters on this stress distribution is analyzed.

PDF

___

S.D. Akbarov, A.N. Guz, “Mechanics of Curved Composites”, Kluwer Academic Publishers, Dordrecht, The Netherlands, pp: 464, 2000.

S.D. Akbarov, A.N. Guz, “Method of Solving Problems in the Mechanics of Fiber Composites With Curved Structures”, Soviet Applied Mechanics, pp. 777-785, 1985.

K.S. Alan, S.D. Akbarov, “Stress Analyses in an Infınıte Elastic Body with a Locally Curved Covered Nanofiber” Mechanics of Composite Materials. Vol.47 no. 3, pp. 343–358. 2011.

K.S. Alan, "Normal Stresses in an Infinite Elastic Body with a Locally Curved and Hollow Nanofiber” CMC-Computers Materials & Continua, vol. 44, no.1, pp.1- 21, 2014.

A.N. Guz, “Failure mechanics of composite materials in compression” – Kiev: Naukova Dumka, Russia ,–630 p. 1990.

A.N. Guz , “On one two-level model in the mesomechanics of compression fracture of Cracked Composites”, Int. Appl. Mech. Vol.39 no.3, pp.274-285, 2003.

A.N. Guz, “Fundamentals of the Three- Dimensional Theory of Stability of Deformable Bodies”, Springer. Newyork, NY. 1999.

F. Coban, R. Kosker, “On The Stress Distribution In An Elastic Body With A Locally Curved Carbon Nanotube”, 3rd Internatıonal Symposıum On Innovatıve Technologıes In Engıneerıng And Science, Valencia, SPAIN, pp.2299-2307, 2015.

A. Kelly , “Composite Materials: impediments do wider use and some suggestions to overcome these”, In Proceeding Book (ECCM-8), Napoles- Italy, Vol.I, pp.15-18, ( 3-6 June) 1998.

Yu.M. Tarnopolsky, I.G. Jigun, V.A. Polyakov, “Spatially-reinforced composite materials”, Handbook, Mashinostroyenia, Moscow, Russia . 1987.

K.S. Alan, “Investigation of the Normal Stress In An Infinite Elastic Body With A Locally Curved Carbon Nanotube”, 2nd International Conference of Mathematical Sciences (ICMS 2018), 31 July-6 August 2018, Istanbul, Turkey.