Cem MEHMETALİOĞLU, Arzu ÖZÜYAĞLI, Ebru AKCAN, ŞADUMAN ŞEN, UĞURSOY OLGUN, UĞUR ŞEN, AKIN AKINCI

Nano TiO2 dolgulu polimer esaslı hidrofobik kaplamanın yüzey özelliklerinin incelenmesi

Bu çalışmada ETİAL 171 numaralı alüminyum alaşımlı yüzeylere Trimethoxymethylsilane (MTMS), TetraethylorthoSilicate (TEOS), asetik asit ve saf suyun mol oranları sırasıyla 1:0,04:0,34:1,59 olacak şekilde sol-gel yöntemi kullanılarak kaplanmıştır. Kaplamalar titanyumdioksit (TiO2) nano toz katkısı kullanılarak üretilmiştir. Üretilen kaplamaların yüzey analizleri optik mikroskop, ıslatma açısı, kalınlık ölçümü cihazları kullanılarak ve crosscut test kiti ile yapışma adezyonu belirlenmiştir. Islatma açısı 145,5° olan hidrofobik özelliklere sahip kaplama üretilmiştir.

Investigation of surface properties of nano TiO2 filled polymer based hydrophobic coating

In this study ETİAL 171 to aluminum alloy surfaces were coated using the sol-gel process the molar ratio of Trimethoxymethylsilane (MTMS), TetraethylorthoSilicate (TEOS), acetic acid and pure water 1: 0.04: 0.34: 1.59. Coatings are manufactured using nano-additive powders titanium dioxide (TiO2). Optical microscope, contact angle, thickness measurement, cross cut test kit devices were used for tests. Coatings produced with hydrophobic properties.

PDF

___

J.C. Brinker, W. Scherer, Sol-gel science: the physics and chemistry of sol-gel processing, United Kingdon, MA: Academic press, 2013.
Rao, A. V., Latthe, S. S., Nadargi, D. Y., Hirashima, H., & Ganesan, V, "Preparation of MTMS based transparent superhydrophobic silica films by sol–gel method” Journal of colloid and interface science, cilt 2, no. 332, pp. 484- 490, 2009.
N. Rivier, “Non-stick quasicrystalline coatings,” Journal of Non-Crystalline Solids, no. 153, pp. 458-462, 1993.
A. Frank ve W. Scholz, “Defoamers in the coatings industry,” CHIMIA International Journal for Chemistry, cilt 5, no. 56, pp. 177-183, 2002.
Neri, G., Bonavita, A., Micali, G., Rizzo, G., Callone, E., "Resistive CO gas sensors based on In 2 O 3 and InSnO x nanopowders synthesized via starch-aided sol–gel process for automotive applications," Sensors and Actuators B, vol. 1, no. 132, pp. 224-233, 2008.
Piveteau, L. D., Girona, M. I., Schlapbach, L., Barboux, P., Boilot, J. P., & Gasser, B., “Thin films of calcium phosphate and titanium dioxide by a sol-gel route: a new method for coating medical implants,” Journal of Materials Science: Materials in Medicine, cilt 3, no. 10, pp. 161-167, 1999.
Kiyoharu T., Junichi M., Atsunori M., Tsutomu M., “Superhydrophobic−Superhydrophilic Micropatterning on Flowerlike Alumina Coating Film by the Sol−Gel Method,” Chemistry of materials, cilt 3, no. 12, pp. 590-592, 2000.