Kudret GÜZEL, EKREM ALTUNCU, SİNAN FİDAN

Comparison of Solid Particle Erosive Wear Rate at Room Temperature of Flexicord Flame Sprayed Different Oxide Coatings

Flame spray technology is basic member of the thermal spray coating family. Higher cost-effective coatings can be produced at higher speeds with new flame spray equipments which developed in recent years. The Flexicord flame spray method developed in this direction offers many advantages. A wide variety of ceramic coatings can be deposited on metallic surfaces with this spray methods in the face of wear-induced problems. In this study, solid particle erosion rates and wear behaviors of different oxide (Al2O3, MgO-Zr2O3, Al2O3-MgO based coatings have been studied comparatively with respect to ASTM G76 standard. Spinel based coatings between the oxide based coatings exhibited superior wear resistance and significantly lower mass loss than the others. Due to the fragile nature of the ceramic coatings, the erosive wear rate is increased by crack growth formation related with the porosity of coating. Due to the accelerated solid particle impacting at high impact angles, wear rate is highest.

PDF

___

P. Vuoristo Thermal spray coating processes D. Cameron (Ed.), Comprehensive Materials Processing, vol. 4, Elsevier (2014), pp. 229- 276.

Mayank Patel, Darshan Patel, S. Sekar, P.B. Tailor, P.V. Ramana; Study of Solid Particle Erosion Behaviour of SS 304 at Room Temperature, Procedia Technology, Volume 23, 2016, Pages 288-295.

Priit Kulu, Irina Hussainova, Renno Veinthal, Solid particle erosion of thermal sprayed coatings, Wear, Volume 258, Issues 1–4, 2005, Pages 488-496

J.F. Santa, L.A. Espitia, J.A. Blanco, S.A. Romo, A. Toro; Slurry and cavitation erosio resistance of thermal spray coatings, Wear, Volume 267, Issues 1–4, 2009, Pages 160-167

Cernuschi, F., Guardamagna, C., Capelli, S., Lorenzoni, L., Mack, D.E., Moscatelli, A., Solid particle erosion of standard and advanced thermal barrier coatings, 348-349, 43–51, 2016.

ASTM G76-13, Standard test method for conducting erosion test by solıd particle ımpingement using gas jet, 2013.