Bakır esaslı şekil bellekli alaşımların üretimi ve çekme deneyi ile karakterizasyonu

Bu çalışmada Şekil Bellekli Alaşımlar (ŞBA), tarihi gelişimi, uygulama şekilleri ve karakteristik özellikleri ile hakkında kısa bilgiler giriş kısmında bahsedilmekte. Daha sonraki kısımlarda ŞBA'ların genel üretim yöntemleri. ŞBA'ların karakterizasyonunda kullanılan metotlar hakkında bilgiler verilmekte. Son bölümde ise konuya esas olan Cu esaslı ŞBA'ların üretimi, çekme deneyi ile ilgili çalışmalar ve elde edilen sonuçlar verilmektedir.

The production of copper based shape memory alloys and characterization by means of tensile testing

In this study, a brief historical development, application types, characteristic properties of Shape Memory Alloys (SMA) was given in introduction section. Information about the general production techniques and the characterization methods of the SMA's are given in the latter sections. In the final section, information about the recent studies which was the main subject of this study; the production and characterization of SMA's by tensile tests were given.

___

  • [1]. Aydogdu A., Aydogdu Y., Adiguzel O., "Long-term ageing behaviour of martensite in shape memory Cu-Al-Ni alloys", Journal of Materials Processing Technology 153-154(2004) 164-169
  • [2]. Hodgson D.E., Wu M.H. ve Biermann R.J., Metals Handbook, Vol.2, 10th Edition, Nov. 1990
  • [3]. Srinivasan A.V., McFarland D.M., Smart Structures "Analysis and Design", Cambridge University Press, 2001, Ch 3, pp 26-34
  • [4]. R. Gastien a,, C.E. Corbellani a, M. Sade b, F.C. Lovey, "Thermal and pseudoelastic cycling in Cu-14.lAl-4.2Ni (wt%) single crystals", Acta Materialia 53 (2005) 1685-1691
  • [5]. Barnes Clive, Copper Development Association, New York, A.B.D., CDA yayınları websitesi, www.: copper. org/technology_/1997/07/shape.html
  • [6]. Otsuka K. ve Way man C.M. "Mechanism of Shape Memory Effect and Superelasticity" Shape Memory Materials, Cambridge University Pres, 1999, Ch.2, pp 27-48
  • [7]. Suzuki Y. "Fabrication of Shape Memory Alloys", Shape Memory Materials, Cambridge University Pres, 1999, Ch.6, pp 133-148
  • [8]. Baksan B., "Bakır Alüminyum Alaşımlarından Hızlı Soğutma Yöntemi ile Şekil Bellekli Malzeme Üretimi", Osmangazi Üniversitesi, Fen Bilimleri Enstitüsü, Doktora Tezi, Mart 2004
  • [9]. Saburi T. "Ti-Ni Shape Memory Alloys" Shape Memory Materials, Cambridge University Pres, 1999, Ch.3,pp 49-96
  • [10]. Tadaki T. "Cu-based Shape Memory Alloys" Shape Memory Materials, Cambridge University Pres, 1999, Ch.4, pp 97-116
  • [11]. Larochette P. Arneodo, Ahlers M., "Grain-size dependence of the two-way shape memory effect obtained by stabilisation in Cu-Zn-Al crystals", Materials Science and Engineering A361 (2003) 249-257
  • [12]. Liu Yong, "Detwinning process and its anisotropy in shape memory alloys", Smart Materials, Proceedings of SPIE, Vol. 4234, pp 82-93, 2001 [13]. Otsuka K. ve Shimizu K., "Memory Effect and Thermoelastic Martensite Transformation in Cu-Al-Ni Alloy", Scripta Metallurgica, Vol.4, pp.469-472, 1970
  • [14]. Sugimoto K., "Recent Development in Copper-Based Shape Memory Alloys", Proc. 1st. Japan International SAMPE Symposium, Nov.28-Dec-1, 1989, pp.219-224.
  • [15]. Ghosh B., Banerjee M.K., Seal A.K., "Shape Memory in Some Copper Alloys", Materials Science and Technology, May 1986, Vol.2, pp 496-499
  • [16]. Perkins J., "Shape Memory Behavior and Thermoelastic Martensitic Transformations", Materials Science and Engineering, 51 (1981), pp 181-192
  • [17]. Humbeeck J.Van, Stalmans R. "Characteristics of Shape Memory Alloys", Shape Memory Materials, Cambridge University Pres, 1999, Ch.7, pp 149-183