Şebekeye Bağlı Bir Rüzgâr Enerji Sisteminin PSCAD ile Modellenmesi ve İncelenmesi

Rüzgâr değişken yapılı bir enerji kaynağıdır. Şebekeye bağlı rüzgâr türbin sistemlerinde rüzgârın değişken yapısı şebekeyi olumsuz etkilemektedir. Burada önemli olan şebeke entegrasyon etkilerinin standartlar dahilinde olmasını sağlayabilmektir. Bu sayede şebekede ciddi problemlerin oluşması engellenir. Bu nedenle şebeke entegrasyon etkilerinin araştırılması ve bu etkilerin azaltılmasına yönelik çalışmaların önceden yapılması oldukça önemlidir. Ancak literatürde şebeke entegrasyon etkilerinin incelenmesi ve bu etkilerin azaltılmasına yönelik yapılan sınırlı sayıda çalışma bulunmaktadır. Bu amaçla çalışmada, şebekeye bağlı 3 MVA’lık kalıcı mıknatıslı senkron generatöre (KMSG) sahip bir rüzgâr türbin sistemi, PSCAD/EMTDC’de modellenmiştir. Oluşturulan model yardımıyla rüzgârın değişken yapısı, rüzgâr enerji santrallerinin şebekeye entegrasyonu incelenmiş ve farklı yük koşulları altında rüzgâr santralinden şebekeye aktarılan güç miktarları sunulmuştur. Aynı zamanda rüzgârın kesikli ve değişken yapısının şebeke üzerinde oluşturabileceği olumsuz etkiler analiz edilerek bu etkilerin azaltılması amacıyla, DC hat üzerinde invertörün kontrollü çalışmasını sağlayan gerilim regülasyon işlemi gerçekleştirilmiştir.

Modeling and Examination of Grid Connected Wind Energy System with PSCAD

Wind is a variable struct energy source. The variable nature of the wind in grid-connected wind turbine systems adversely affects the grid. The important thing here is to ensure that the grid integration effects are within the standards. In this way, serious problems in the grid are prevented. For this reason, it is very important to investigate the effects of grid integration and to carry out studies to reduce these effects in advance. However, there are limited studies in the literature to examine the effects of grid integration and to reduce these effects. For this purpose ın study, a wind turbine system with a 3 MVA permanent magnet synchronous generator (PMSG) connected to the grid is modeled in PSCAD/EMTDC. With the help of the created model, the variable nature of the wind, the integration of wind power plants into the grid are examined and the amount of power transferred from the wind farm to the grid under different load conditions is presented. In addition, the negative effects of the intermittent and variable nature of the wind on the network were analyzed and in order to reduce these effects, the voltage regulation process was carried out on the DC line, which ensures the controlled operation of the inverter.

___

  • [1] Nayak K. S. and Jamel S., "Variable wind, dynamic load, constant voltage wind turbine generation system", 2018 IEEE Innovative Smart Grid Technologies - Asia (ISGT Asia), Singapore, 903-907, (2018).
  • [2] Kamali H. Z., Salameh Z., and Ashfaq A., "Modeling of wind energy conversion system using PSCAD/EMTDC", Internatıonal Journal of Renewable Energy Research, 7: 178-187, (2017).
  • [3] Mararakanye N. and Bekker B., "Renewable energy integration impacts within the context ot generator type, penetration level and grid characteristics", Renewable and Sustainable Energy Reviews, 108: 441-451, (2019).
  • [4] Ezhililjenekkha G. B. and Marselinebeno M., "Review of power quality issues in solar and wind energy", Materials Today: Proceedings, 24: 2137-2143, (2020).
  • [5] Lu S., Wang L., Ke S., Chang C., and Yang Z., "Evaluation of measured power quality results of a wind farm connected to Taiwan power system", IEEE Transactions on Industry Applications, 52: 42-49, (2016).
  • [6] Kocatepe C., İnan A., Arıkan O., Yumurtacı R., Kekezoğlu B., Baysal M., et al., "Power quality assessment of grid-connected wind farms considering regulations in Turkey", Renewable and Sustainable Energy Reviews, 13: 2553-2561, (2009).
  • [7] Mutlu S. Ö., "Evaulating the impacts of wind farms on power system operation", Journal of Naval Science and Engineering, 6: 166-185, (2010).
  • [8] Machmoum M., Hatoum A., and Bouaouiche T., "Flicker mitigation in a doubly fed induction generator wind turbine system", Mathematics and Computers in Simulation, 81: 433-445, (2010).
  • [9] Ibrahim H., Ghandour M., Dimitrova M., Ilinca A., and Perron J., "Integration of wind energy into electricity systems: technical challenges and actual solutions.", Energy Procedia 6: 815-824, (2011).
  • [10] Bekri L. O. and Mekri F., "Impact of wind turbine on voltage stability", 2018 International Conference on Wind Energy and Applications in Algeria (ICWEAA), Algeria,(2018).
  • [11] Adetokuna B. B., Muriithib M. C., and Ojoc O. J., "Voltage stability assessment and enhancement of power grid with increasing wind energy penetration", Electrical Power and Energy Systems, 120: 1-11, (2020).
  • [12] Chen Z. and Spooner E., "Grid power quality with variable speed wind turbines", IEEE Transactions on Energy Conversion, 16: 148-154, (2001).
  • [13] Chaithanya S., Reddy B. N. V., and Kiranmayi R., "Modeling & analysis of grid-tied PMA based offshore wind energy system using PSCAD/EMTDC", Ain Shams Engineering Journal, 10: 411-417, (2019).
  • [14] Cedrat, "PSCAD Version 4.2", Wind Turbine Applications Techical Paper, France,(2007).
  • [15] EPDK, "Elektrik Şebeke Yönetmeliği, Rüzgar ve Güneş enerjisine dayalı fotovoltaik üretim tesislerinin şebeke bağlantı kriterleri, EK 18," (2017).
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Hidrojen Teknolojileri Araştırmalarında Disiplinlerarasılık: Toplumsal Bilimler Yaklaşımı

Arsev Umur AYDINOĞLU, Yelda ERDEN TOPAL, Iskender GÖKALP

Software-based wind energy potential assessment: a case study from western Turkey

Fatma Kadriye Düden ÖRGEN, Ayça ALTINTAŞ, Sezai YAŞAR, Murat ÖZTÜRK, Erdem ÇİFTÇİ, Azim Doğuş TUNCER

Covid-19 Sürecinde Mevcut Hastanelerde Mekanik Sistemlerinde Alınması Gereken Önlemler Ve Tecrübeler

Zeki YİLMAZOGLU, Ahmet DEMİRCAN

Makine Öğrenmesi Yöntemleri İle Günümüz Ve Geleceğe Yönelik Meslek Tahminlerinin Değerlendirilmesi : Türkiye'den Ampirik Deliller

Ebru KARAAHMETOĞLU, Süleyman ERSÖZ, Ahmet Kürşad TÜRKER, Volkan ATEŞ, Ali Firat İNAL

Havacılık Endüstrisi Proseslerine Uygun Robotların Seçimi İçin Çok Ölçütlü Bir Karar Verme Modelinin Geliştirilmesi

Osman Emre CELEK, Mustafa YURDAKUL, Yusuf Tansel İÇ

Design Improvements by Using the Design for Assembly (DFA) Method in Elevator Production

Mesut AYDINLI, Kadir ÖZKAYA

Ahşap Lavabo ve Küvetlerde Boyutsal Kararlılık Tasarımına Emprenye İşleminin Etkisi

Betül ÖZTÜRK, Musa ATAR

NACA 6409 ve Eppler 423 Kanat Profillerinin Sayısal Analizi

Seyhun DURMUŞ, Aytekin ULUTAŞ

Fotovoltaik Hücrelerin Yüzey Morfolojisi ve Verimliliği Üzerinde Termal Tavlama Etkisi

Kevser ŞAHİN TIRAŞ, Thilini RUPASİNGHE, Markus WOHLGENANNT, Alexei TİVANSKİ

Anodik Oksidasyonun AA7050-T7451 Alaşımının Yorulma Performansına Etkisi

Ufuk AKYILDIZ, Oğuz POYRAZOĞLU, Mehmet Yasin DEMİREL