Rotational Surfaces Generated by Cubic Hermitian and Cubic Bezier Curves

To tackle the geometric design in adjusting shapes of rotation surfaces, firstly the rotation surfaces have been constructed by using cubic Hermitian and cubic Bezier curves with two local shape parameters. It has been seen that, the new rotational surfaces which have been constructed have a good performance on adjusting their shapes by changing the local shape parameters. Also, the rotational surfaces generated by cubic Hermitian and cubic Bezier curves have provided a valuable way for the design of interesting surfaces. In this context, some characterizations have been given for these rotational surfaces obtaining the mean and Gaussian curvatures of them.

Rotational Surfaces Generated by Cubic Hermitian and Cubic Bezier Curves

To tackle the geometric design in adjusting shapes of rotation surfaces, firstly the rotation surfaces have been constructed by using cubic Hermitian and cubic Bezier curves with two local shape parameters. It has been seen that, the new rotational surfaces which have been constructed have a good performance on adjusting their shapes by changing the local shape parameters. Also, the rotational surfaces generated by cubic Hermitian and cubic Bezier curves have provided a valuable way for the design of interesting surfaces. In this context, some characterizations have been given for these rotational surfaces obtaining the mean and Gaussian curvatures of them.

___

  • 1] Arslan K., Bulca B. and Kosova D., “On Generalized Rotational Surfaces in Euclidean Spaces”, J. Korean Math. Soc., (2017). [2] Baikoussis C. and Blair D.E., “On the Gauss map of ruled surfaces”, Glasgow Math. J., 34: 355-359, (1992).
  • [3] Bobenko A. and Pinkall U., “Descrete sothermic Surfaces”, J. reine angev, Math, 475: 187-208, (1996).
  • [4] Chen B.Y., Choi M. and Kim Y.H, “Surfaces of revolution with pointwise 1-type Gauss map”, J. Korean Math. Soc., 42(3): 447-455, (2005).
  • [5] Dietz R., Hoschek J. and Juettler B., “An algebraic approach to curves and surfaces on the sphere and on other quadrics”, Computer Aided Geometric Design, 10: 211-229, (1993).
  • [6] Farin G., “Curves and Surfaces for CAGD: A Practical Guide”, Academic Press Inc, San Diego (2002).
  • [7] Kazan A. and Karadağ H. B., “A classification of Surfaces of Revolution in Lorentz-Minkowski Space”, Int. J. Contemp. Math. Sciences, 6(39): 1915-1928, (2011).
  • [8] Kazan A. and Karadağ H. B., “Weighted Minimal and Weighted Flat Surfaces of Revolution in Galilean 3-Space with Density’’, Int. J. of Analysis and Applications, 16(3): 414-426, (2018).
  • [9] Octafiatiningsih E. and Sujarwo I., “The Application of Quadratic Bezier Curve on Rotational and Symmetrical Lampshade”, Cauchy-Journal of Pure and Applied Mathematics, 4(2): 100-106, (2016).
  • [10] Saxena A. Saxena Sahay B., “Computer Aided Engineering Design”, Anamaya Publishers, New Delhi, India, (2005).
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Karpal Tünel Sendromu Temelli Elektronik Sağlık Kayıt Sisteminin Geliştirilmesi

Mehmet İbrahim TALAN, Mehmet Rahmi CANAL, VEYSEL ALCAN, MURAT ZİNNUROĞLU, HİLAL KAYA

Functionalized Multi-Walled Carbon Nanotubes and Micro Cellulose Reinforced Poly (Vinyl Alcohol) Hybrid Composite Films: Characterization and Reprocessing Performance

Ümit HÜNER

R260 Ray Çeliğinin Değişen Sıcaklıklardaki Davranışının EMI Yöntemi ile İncelenmesi

Mesut TEKKALMAZ, Gökhan HAYDARLAR, Ümit ER

Dikdörtgen Parçalar ile İki Boyutlu Kesme ve Paketleme Problemi için Sezgisel Yöntemler Kullanılan Bir Hibrit Metodoloji

Hüseyin FIRAT, Nuh ALPASLAN, DAVUT HANBAY

Heterojen Medikal IoT Verilerinin Depolanmasında İlişkisel Olmayan Veritabanına Dayalı Bir Yaklaşım

HÜSEYİN POLAT, Saadin OYUCU

Alternatif Gerilim Uygulanan Betonlarda S/Ç Oranının ve Hiperakışkanlaştırıcı Oranının Priz Bitiş Süresi ve Basınç Dayanımına Etkilerinin Araştırılması

İsmail HOCAOĞLU, Tayfun UYGUNOĞLU

Combustion Properties of Impregnated and Heat-Treated Wood Material

Osman PERÇİN, Musa ATAR

The Effect of Mechanical Properties and the Cutting Parameters on Machinability of AISI 5140 Steel Cooled at High Cooling Rates After Hot Forging

Barış ÖZLÜ, Halil DEMİR, Mustafa TÜRKMEN

Frezeleme Operasyonlarında Kesme Kuvvetlerinin Deneysel ve Sonlu Elemanlar Analizi ile İncelenmesi: Saf Molibdenin İşlenmesi Üzerine Bir Çalışma

Hüseyin GÖKÇE, İbrahim ÇİFTÇİ, Harun GÖKÇE

Doluluk Oranlarının PLA ve PET Malzemelerin Mekanik Özellikleri Üzerine Etkileri

Hatice EVLEN, Merve Ayfer ÖZDEMİR, Aydın ÇALIŞKAN