Inertia and Droop Controller for a Modern Variable Speed Wind Turbine to Provide Frequency Control in a Microgrid

The increasing penetration of modern Variable Speed Wind Turbines (VSWTs) in microgrids creates the problem of frequency stabilization due to reduced inertia of the power system. To emulate the Inertia Response of the conventional synchronous machines, wind turbines can be provided with an inertia emulation controller. The modeling presented in this paper aims at equipping the modern Type D wind turbine with inertia response and primary frequency control (PFC) capabilities. Two controllers — inertial and droop, are implemented and their frequency control capabilities are compared in an isolated power system which consists of a conventional steam turbine generator and a wind farm. The results suggest that proposed controllers help in better frequency control performance in the microgrid.

Inertia and Droop Controller for a Modern Variable Speed Wind Turbine to Provide Frequency Control in a Microgrid

The increasing penetration of modern Variable Speed Wind Turbines (VSWTs) in microgrids creates the problem of frequency stabilization due to reduced inertia of the power system. To emulate the Inertia Response of the conventional synchronous machines, wind turbines can be provided with an inertia emulation controller. The modelling presented in this paper aims at equipping the modern Type D wind turbine with inertia response and primary frequency control (PFC) capabilities. Two controllers — inertial and droop, are implemented and their frequency control capabilities are compared in an isolated power system which consists of a conventional steam turbine generator and a wind farm. The results suggest that proposed controllers help in better frequency control performance in the microgrid

___

  • Reference1
  • Leung, D.Y., Y.J.R. Yang, and s.e. reviews, Wind energy development and its environmental impact: a review. 2012. 16(1): p. 1031-1039.
  • Reference2
  • Yingcheng, X. and T.J.R.e. Nengling, Review of contribution to frequency control through variable speed wind turbine. 2011. 36(6): p. 1671-1677.
  • Reference3
  • TransEnergie, H.Q., Technical requirements for the connection of generation facilities to the hydro-quebec transmission system-supplementary requirements for wind generation. 2003, May.
  • Reference4
  • Holdsworth, L., et al., Power system frequency response from fixed speed and doubly fed induction generator‐based wind turbines. 2004. 7(1): p. 21-35.
  • Reference5
  • Ramtharan, G., N. Jenkins, and J.J.I.R.P.G. Ekanayake, Frequency support from doubly fed induction generator wind turbines. 2007. 1(1): p. 3-9.
  • Reference6
  • Akbari, M. Participation of DFIG based wind turbines in improving short term frequency regulation. in 2010 18th Iranian Conference on Electrical Engineering. 2010. IEEE.
  • Reference7
  • Marnay, C., et al. Microgrid evolution roadmap. in 2015 international symposium on smart electric distribution systems and technologies (EDST). 2015. IEEE.
  • Reference8
  • Dreidy, M., et al., Inertia response and frequency control techniques for renewable energy sources: A review. 2017. 69: p. 144-155.
  • Reference9
  • Hansen, A.D. and I.D.J.D.W.E.r. Margaris, Type IV wind turbine model. 2014.
  • Reference10
  • Hansen, A.D., Introduction to wind power models for frequency control studies. 2016.
  • Reference11
  • Saadat, H., Power systems analysis of Mcgraw-Hill series in electrical and computer engineering. 2002: McGraw-Hill, New York.
  • Reference12
  • Gagnon, R., J.J.H.-Q. Brochu, and I. The MathWorks, Wind Farm-Synchronous Generator and Full Scale Converter (Type 4) Detailed Model. 2006: p. 1997-2009.
  • Reference13
  • Xie, L., et al., Wind integration in power systems: Operational challenges and possible solutions. 2010. 99(1): p. 214-232.
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ