Mapping of Turkey’s District Heating/Cooling Requirements

One of the most important parameters of energy efficiency is to determine the heating and cooling requirements of the buildings and to develop the appropriate heating/cooling technology. In this study, the regional residence heating/cooling loads were determined in order to develop technology for regional heating/cooling systems in Turkey. Heating/cooling loads of the residences were made separately for each province according to the heating regions determined in accordance with TS 825. Fuel and electricity consumption, population, number of residences and meteorological data were used as the basis for determining the heating/cooling loads. Using the data obtained, an important source data was obtained to investigate the possibility of using alternative energy sources for each region or even every province.
Anahtar Kelimeler:

Heating, cooling, energy

Mapping of Turkey’s District Heating/Cooling Requirements

One of the most important parameters of energy efficiency is to determine the heating and cooling requirements of the buildings and to develop the appropriate heating/cooling technology. In this study, the regional residence heating/cooling loads were determined in order to develop technology for regional heating/cooling systems in Turkey. Heating/cooling loads of the residences were made separately for each province according to the heating regions determined in accordance with TS 825. Fuel and electricity consumption, population, number of residences and meteorological data were used as the basis for determining the heating/cooling loads. Using the data obtained, an important source data was obtained to investigate the possibility of using alternative energy sources for each region or even every province.
Keywords:

heating, cooling, energy,

___

  • 1- Nakicenovic N., Grübler A., McDonald A. (Eds.). “Global Energy Perspectives”, Cambridge University. 299, (1998). 2- Nusret AYDIN, Atilla BIYIKOĞLU, Determination of optimum insulation thickness based on heating load by life-cycle cost analysis for residential buildings in Turkey Journal of Polytechnic, 2019; 22(4): 901-911 3- Yaman, Ö., Şengül, Ö., Selçuk, H., Çalıkuş, O., Kara, İ., Erdem, Ş. and Özgür, D., “Binalarda ısı yalıtımı ve ısı yalıtım malzemeleri”, Türkiye Mühendislik Haberleri Dergisi, 487: 62-75, (2015). 4- ÇŞB, “Isı yalıtım uygulama kılavuzu”, Ankara: Çevre ve Şehircilik Bakanlığı, 2-3, (2015). 5- Coşkun C., Oktay Z., Ertürk M. “Konutların ısıtma sezonunda seçilen iç ortama sıcaklık parameteresinin enerji-maliyet-çevre açısından değerlendirilmesi ve bir uygulama örneği”, ΙΧ. Ulusal Tesisat Mühendisliği Kongresi, İzmir, 529-538, (2009). 6- Durmayaz A., Kadıoğlu M., “Heating energy requirements and fuel consumptions in the biggest city centers of Turkey”, Energy Conversion and Management, 44(7): 1177-1192, (2003). 7- Zhijian Liu, Di Wu1 , Yuanwei Liu1 , Zhonghe Han1 , Liyong Lun2 , Jun Gao3 , Guangya Jin1 and Guoqing Cao Accuracy analyses and model comparison of machine learning adopted in building energy consumption prediction Energy Exploration & Exploitation 2019, Vol. 37(4) 1426–1451. 8- Nusret AYDIN, Atilla BIYIKOĞLU, Determination of optimum insulation thickness based on heating load by life-cycle cost analysis for residential buildings in Turkey, Journal of Polytechnic, 2019; 22(4): 901-911. 9- ZhunYua, FariborzHaghighat, Benjamin C.M.Fung, HiroshiYoshino, A decision tree method for building energy demand modeling, Energy and Buildings, Volume 42, Issue 10, October 2010, Pages 1637-1646 10- Luis Perez-Lombard, Jose Ortiz, Christine Pout, A review on buildings energy consumption information, Energy and Buildings 40 (2008) 394–398 11- Mustafa ERTÜRK, Zuhal OKTAY, Can ÇOŞKUN, Ali KEÇEBAŞ, Yusuf ÇAY, Ali DAŞDEMİR, Investigation of Energy and Emission Change for House Heating with Context of Global Warming in Düzce/Turkey, Journal of Polytechnic, 2019; 22 (1) : 197-202. 12- TS 825 13- https://www.mgm.gov.tr/veridegerlendirme/gun-derece.aspx (02.03.2020) 14- https://biruni.tuik.gov.tr/medas/?kn=95&locale=tr (02.03.2020) 15- http://cografyaharita.com/turkiye-nufus-haritalari.html (02.03.2020) 16- Main report of the project entitled “Heating and cooling mapping”, Project no.: A105209, November 2019 17- EMRA, Turkish Annual Natural Gas Market Report in 2018, Ankara 2019 18- EMRA, Turkish Annual Natural Gas Market Report in 2017, Ankara 2018 19- EMRA, Turkish Annual Natural Gas Market Report in 2016, Ankara 2017 20- https://www.iklimhaber.org/turkiyede-ne-kadar-komur-uretiliyor-ithal-ediliyor-nerelerde-kullaniliyor/ 21- Kömür Sektör Raporu Enerji Ve Tabii Kaynaklar Bakanlığı, Türkiye Kömür İşletmeleri Kurumu, 2018. 22- 2018 Yılı Taşkömürü Sektör Raporu (2018 Hard Coal Sector Report), Türkiye Taşkömürü Kurumu (Turkey Hard Coal Enterprises), Mayıs 2019. 23- EMRA, Turkish Mounthly Electricity Market Report in 2018, Ankara 2019 24- EMRA, Turkish Mounthly Electricity Market Report in 2017, Ankara 2018 25- EMRA, Turkish Mounthly Electricity Market Report in 2016, Ankara 2017
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Çelikhane Cürufunun Yol Temel ve Alttemel Malzemesi Olarak Kullanılması

Hüseyin KARADAĞ, Seyhan FIRAT, Nihat Sinan IŞIK

Estimations of stress concentration factors Cw/Kts for helical circular/square cross sectional tension-compression springs and artificial neural network modelling

Murat Tolga OZKAN, İHSAN TOKTAŞ, Sukru Kaan DOGANAY

Hesaplamalı Akışkanlar Dinamiği ile Ses Altı Bir Roketin Aerodinamik Analizi

Fatih AKTAŞ, Zeynep AYTAÇ

Mapping of Turkey’s District Heating/Cooling Requirements

Adnan SÖZEN, TAYFUN MENLİK, Amjad ANVARİ-MOGHADDAM

High Energy Efficient System Design for Incubation Process and Cooling of Yoghurt

Gülşah KARACA, Ekin Can DOLGUN, Rukiye MAVUŞ, Mustafa AKTAŞ

A Numerical Study on Performance Improvement in Boiling Heat Transfer via Dichloromethane-Based Nanofluid Utilization

ERDEM ÇİFTÇİ, Adnan SÖZEN

Determination of Stress Concentration Factor (Kt) for a Crankshaft Under Bending Loading: An Artificial Neural Networks Approach

İHSAN TOKTAŞ, Murat Tolga OZKAN, Fulya ERDEMIR, Nurullah YUKSEL

Estimations of Stress Concentration Factors (Cw/Kts) For Helical Circular/Square Cross Sectional Tension-Compression Springs And Artificial Neural Network Modelling

M. Tolga ÖZKAN, İhsan TOKTAŞ, Kaan DOĞANAY

Investigation of Effects of Fiber Orientation Angles on Deflection Behavior of Cantilever Laminated Composite Square Plates

Savas EVRAN

Equi-Depth Histogram Construction Methodology for Big Data Tools

Tolga BUYUKTANIR, Ahmet Ercan TOPCU