Alaaddin GÜNDEŞ, Ali DEĞİRMENCİ, Ali Kemal SOĞUKSU

Atık Seramik CPU ve Telefon Kartlarında Altın ve Diğer Değerli Metallerin Geri Kazanımı

Artan dünya nüfusu ile gelişen teknolojik yenilikler sonucunda hızla artan hammadde tüketimi ve bunun sonucunda oluşan atık ürünlerinden hammadde geri dönüşümü önem kazanmıştır. Özelliklede değerli metaller açısından geri kazanım çok büyük öneme sahiptir. Bu çalışmada, bilgisayarlarda bulunan seramik işlemci (CPU) ve cep telefonu kartlarından değerli metallerin geri kazanımı amaçlanmıştır. Çalışmada ömürlerinin sonuna gelmiş elektrikli ve elektronik ekipmanlarından (EEE) olan seramik CPU ve telefon kartlarında bulunan değerli metaller fiziksel, hidrometalurji ve pirometalurjik yöntemler kullanılarak elde edilmiştir. Bu değerli metalleri içeren minerallerin yüksek değeri ve sınırlı rezervleri, değerli metallerin kentsel madenciliğini çok çekici kılmaktadır. Uygulanan yöntemler sürecinde değerli metal miktarları ICP-OES ile ölçülmüştür. Çalışmada diğer değerli metallerin yanı sıra seramik CPU’da Altın(Au) oranı yaklaşık olarak 1119 mg/kg olarak bulunmuştur. Atık cep telefon kartlarında ise yaklaşık 54,40 mg/kg Altın(Au) tespit edilmiştir.

Anahtar Kelimeler:

Altın, Değerli metal, E-Atık, Hidrometalürji

Recovery of Gold and Other Precious Metals in Waste Ceramic CPUs and Phone Cards

Due to the increasing world population and the developing technological innovations, the rapidly increasing consumption of raw materials and as a result, the recycling of raw materials from waste products has gained importance. Especially in terms of precious metals, recovery is of great importance. In this study, it is aimed to recover precious metals from ceramic processors (CPU) in computers and mobile phone cards. This study, precious metals found in ceramic CPUs and telephone cards, which are electrical and electronic equipment (EEE) that have reached the end of their life, were obtained by using physical, hydrometallurgical and pyrometallurgical methods. The high value and limited reserves of minerals containing these precious metals make urban mining of precious metals very attractive. During the applied methods, precious metal amounts were measured with ICP-OES. In the study, besides other precious metals, the rate of gold (Au) in ceramic CPU was found to be approximately 1119 mg/kg. On the other hand, approximately 54.40 mg/kg of gold (Au) was detected in waste mobile phone cards.

Keywords:

E-Waste, Gold, Hydrometallurgy, Precious metal,

PDF

___

Arshadi, M.S. Yaghmaei, S.M. Mousavi, (2018). Content evaluation of different waste PCBs to enhance basic metals recycling. Resources, Conservation and Recycling. 139: 298-306.
Barbieri, L., Giovanardi, R., Lancellotti, I., & Michelazzi, M. (2009). A new environmentally friendly process for the recovery of gold from electronic waste. Environmental Chemistry Letters, 8(2), 171–178. doi:10.1007/s10311-009-0205-2
Bisceglie, F., Civati, D., Bonati, B., & Faraci, F. D. (2017). Reduction of potassium cyanide usage in a consolidated industrial process for gold recovery from wastes and scraps. Journal of Cleaner Production, 142, 1810–1818. doi:10.1016/j.jclepro.2016.11.103
Carvalho, M.A., Caldas, M.P.K., Tenório, J.A.S., Espinosa, D.C.R., (2018). Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals. In TMS Annual Meeting & Exhibition (pp. 147-154). Springer, Cham.
Cayumil, R., Khanna, R., Rajarao, R., Mukherjee, P.S., Sahajwalla, V., (2016). Concentration of precious metals during their recovery from electronic waste. Waste management, 57, 121-130.
Chehade, Y., Siddique, A., Alayan, H., Sadasivam, N., Nusri, S., Ibrahim, T., (2012). Recovery of gold, silver, palladium, and copper from waste printed circuit boards. In Proceedings of the international conference on chemical, civil and environment engineering (ICCEE), Dubai, United Arab Emirates (pp. 24-25).
Cui, J., Zhang, L., (2008). Metallurgical recovery of metals from electronic waste: A review. Journal of hazardous materials, 158(2-3), 228-256.
Dehchenari, M.A., Hosseinpoor S., Aali R., Iran N.S., Mehdipour M., “Simple method for extracting gold from electrical and electronic wastes using hydrometallurgical process” Environmental Health Engineering and Management Journal 2017, 4(1), 55–58
Havlik, T., Orac, D., Petranikova, M., Miskuliova, A., (2011). Hydrometallurgical treatment of used printed circuit boards after thermal treatment. Waste Manag 31:7;1542-1546.
Karamanoğlu P., Aydın, S., (2016). An economic analysis of the recovery of gold from CPU, boards, and connectors using aqua regia, Desalination and Water Treatment, 57(6), 2570-2575.
Kaya, M., (2016). Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. Waste management, 57, 64-90.
Li, J., Zeng, X., (2012). Recycling printed circuit boards. In Waste electrical and electronic equipment (WEEE) handbook (pp. 287-311). Woodhead Publishing.
Lu, Y.,Xu, Z., (2017). Recyclingnon-leaching gold from gold-plated memory cards: Parameters optimization, experimental verification, and mechanism analysis, Journal of Cleaner Production 162, 1518-1526.
Ritcey, G.M., (2006). Solvent extraction in hydrometallurgy: present and future. Tsinghua Science and Technology, 11(2), 137-152.
Safarzadeh, M.S., Bafghi, M.S., Moradkhani, D., Ilkhchi, M.O., (2007). A review on hydrometallurgical extraction and recovery of cadmium from various resources. Minerals Engineering, 20(3), 211-220.
Sinioros, P.,Lasithiotakis, M., &Akidil, M. E. (2015). Small-Capacity Gold ProductionTestsFromWaste Desktop Computers. Environmental Quality Management, 25(2), 5–6. doi:10.1002/tqem.21449
Sum EY.,“The recovery of metals from electronic scrap”. JOM 1991; 43(4): 53-61. doi: 10.1007/BF03220549
Syed S. “Recovery of gold from secondary sources—A review. Hydrometallurgy” 2012; 115–116: 30-51. doi: 10.1016/j.hydromet.2011.12.012.
Tuncuk, A., Stazi, V., Akcil, A., Yazici, E.Y., Deveci, H., (2012). Aqueous metal recovery techniques from e-scrap: hydrometallurgy in recycling. Minerals engineering, 25(1), 28-37.
Ünal Ö.,“Ram Belleklerdeki Metalik Değerlerin Hidrometalurjik Yöntemlerle Geri Kazanımı” İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü(2015)