___

• 1.Paustenbach, D.J., Richter, R.O., Finley, B.L., and Sheehan, P.J. (2003) An Evaluation of the Historical Exposures of Mechanics to Asbestos in Brake Dust, Applied Occupational and Environmental Hygiene, 18:786804. 2.Paustenbach, D.J., Finley B.L., Lu E.T., Brorby G.P., Sheehan P.J. (2004) Environmental and Occupational Health Hazards Associated with the Presence of Asbestos in Brake Linings and Pads (1900 To Present):A "State-Of-The-Art" Review. Journal of Toxicology and Environmental Health, PartB, 7:33110 3.Blau.P.J. (2001) Compositions, Functions, and Testing of Friction Brake Mater, and Their Additives,U.S. Department of Energy, Office of Transportation Technologies, USA,38. 4.Day,A.J. (2000) Friction, Friction Materials, and Brake Operational Characterstics, Short Course on the Braking of Road Vehicles,Universi1y of Bradford,4-8 September p, 13. 5.Uygur, M.E., (1996) Balata Üretim Teknolojisi, I,Ulusal Toz Metalürjisi Kongresi, Bildiriler kitapçığı, Gazi Üniversitesi, Ankara, s. 6-17. 6.Boz,M., (2003) Seramik Takviyeli Bronz Esaslı Toz Metal Fren Balata Üretimi ve Sürtüme-Aşıhma Özel. Araştırılması, Doktora Tezi, Gazi Üniversitesi, Ankara, s. 3-47, 7.Österle.W., Griepentrog.M., Gross, T. H. and Urban,I. (2001) Chemical and microstructural changes induced by friction and wear of brakes. Wear 251,14691476. 8.Bark,L.S.(1977)Wear41,309. 9.Jacko.M.G, 1978. Wear 46 (1978) 163. 10.Schneider, L. (1988) Schmierungstechnik (Berlin) 19 (1988) 205. 11.Jacko.G.K, and Rhee.S.K. (1992) Kirk Othmer Encyclop.Chem.Tech., 4th edn, John Wiley & Sons, New York, 523-536. 12.Lu.Y. (2004) Optimization of a Semimetallic Friction Material Formulation. Jouranl of Reinforced Plastics and Composites, Vol. 23, No. 14., 1537-1545. 13.Lu.Y., Tang, C.F. and Wright, M.A. (2002) Optimization of a Commercial Brake Pad Formulation. Journal of Applied Polymer Science, Vol.84,2498-2504. 14.Eriksson.M., Bergman, F. and Jacobson.S. (2002) On the Nature of Tribological Contact in Gutomotive Brakes, Wear 252.26-36. 15.Jang.H., Ko,K.,Kim, S.J., Basch, R.H. and Fash, J.W. (2003) The Effect of Metal Fibers on the Friction Performance of Automotive brake friction materials, Wear (article in press). 16.Jang.H., Lee, J.S. and Fash, J.W. (2001) Compositional Effects of the Brake Friction Material on Creep Groan Phenomena, Wear 251.1477-1483. 17.Kim,S.J., Cho, M.H., Lim.D.S. and Jang, H. (2001) Synergistic Effects of Aramid Pulp And Potassium Titanate Whiskers in the Automotive Friction Material, Wear 251,1484-1491. 18.Kim.S.J. and Jang.H. (2000) Friction and Wear of friction Materials Containing Two Different Phenolic Resins Reinforced With Aramid Pulp. Tribology International 33,477-84. 19.Nicholson.G. 1995. Facts About Friction, P&W Price Enterprises, Inc.,Croydon, PA. 20.Demirci, A.H. (2004) Mühendislik Malzemeleri, Önemli Endüstriyel Malzemeler ve Isıl İşlemleri, Alfa Akademi Basım Yayım Ltd.Şti. Eminönü/ İstanbul. S. 176-229. 21.Spurr,R.T. (1972) Fillers in Friction Materials, Wear 22,367-409. 22.Walsh,R. and Spurr, R.T. (1979) Journal in Mech E (Railway Div), C 161,137. 23.Abbasi, F., Shojael,A. and Katbab, A.A.(2000]Thermal Interaction Between Polymer-based Composite Friction Materials and Counterfaces.Jour of Applied Pol Sci,Vol,81,364-369. 24.Kim.S.J. and Jang.H. (2000) Friction and Wear of Friction Materials Containing Two Different Phenolic Resins Reinforced With Aramid Pulp. Tribology International 33,477-84. 25.Jang.H. and Kim. S.J. (2000) The Effects of Sb2S3 And Zirconium Silicate ZrSiO4 in the Automotive Brake Friction Material on Friction Characteristics. Wear 239,229236. 26.Haiberstadt, M. L, Mansfield, J. A., Rhee, S.K. (1977) Effects of Potassium Titanate Fiber on the Wear of Automotive Brake Linings, International Conference on the Wear of Materials, St. Louis, Ma, U.S.A., April 2628. 27.Prasad.S.V. and Zabinski.J.S. (1997) Tribological Behaviour of Nanocristalline Zinc Oxide Films, Wear 203-204.245-256. 28.Österle, W. and Urban,I. (2004) Friction Layers and Friction Films on PMC Brake Pads, Wear 257,215-226. 29.John,P.J.,Prasad,S.V.,Vaevodin, A.A. and Zabinski, J.S.(1998) Calcium Sulphate as a High Temperature Solid lubricant. Wear 219.155-161. 30.Godet,M.(1984) The Third-Body Approach: A Mechanical Wiewof Wear, Wear 100.437-452. 31.Munz.M., Schulz, E. and Sturm, H. (2002) Use of scaning force microscopy studies with combined friction, stiffness and thermal diffusivily contrasts for microskopic characterization of automotive brake pads. Surface and Interface Analysis 33. 100-107. 32.Uexküll, O., Skerfving, S., Doyle, R. and Braungart, M. (2005) Antimony in brake pads-a carcinogenic component? Journal of Cleaner Production 13,1931. 33.Yavuz, N. (2002) Toz Metalürjisi Ders Notları. Uludağ Üniversitesi Müh-Mim. Fak. Makine Müh.Böl. Bursa. 34.Kuhn,H.A., Lawley, A. (1978) Powder Metallurgy Processing New Techniques and Analyses, Academic Press, New York, San Francisko. 35.Oehl.K.H. and H.G.Paul. 1990.Brake Linings for Road Vehicles.Verlag Moderne Industrie AG&Co,D-8910, Box 1751 ,Germany.p, 4-44. 36.Öveçoğlu, M.L. (1997) Toz Metalürjisi Tarihsel Gelişimi, Üretim Aşamaları ve Yeni Eğilimler, 9. Uluslar Arası Metalürji ve Malzeme Kongresi, İstanbul, Türkiye, s. 449-475. 37.Kim,S.J., Kim, K.S. and Jang.H. (2003) Optimization of Manufacturing Parameters For a Brake Lining Using Taguchi