___

• 1. Brown, D., and El Maraghy, H.A., Design and Im-plementation of A Computer-Controlled Sensor-Equipped Robot End Effector, Computers in In-dustıy, 11, pp. 119-133, 1988.
• 2. Pham, D.T., and Yeo, S.H., A Knowledge,Based System for Robot Gripper Selection: Criteria for Choosing Grippers and Surfaces for Gripping, Int. J. Mach. Tools Manufact., Vol. 28, No. 28, pp.301-313, 1988.
• 3. Pham, D.T., and Yeo, S.H., Strategies for Grip-per Design and Selection in Robotic Assembly, Int. J. Prod. Res., Vol. 29, No.2, pp. 303-316, 1991.
• 4. Heilala, J., Ropponen, T., and Airila, M., Mechatronic Design for Industrial Grippers, Mechatronics, Vol. 2, No. 3, pp. 239-255, 1992.
• 5. Tella, R., Bırk, J.R., and Kelley, R.B., General Purpose Hands for Bin- Picking Robots, IEEE Transactions on Systems, Man and Cybernetics, Vol. SMC-12, No. 16, 1982.
• 6. Pham, D.T., and Tacgin, E., Grippex: A Hybrid Expert System for Selecting Robot Gripper Types, Int. J. Mach. Tools Man., Vol. 32, No. 3, pp. 349-360, 1992.
• 7. Karakerezıs, A., Ippohto, M., Doulgen, Z., Rızzı, K., and Petrıdıs, V., A Flexible Gripping System for Handling Irregular Flat Non Rigid Materials, Proceedings of EURISCON'94, European Robotics and Intelligent Systems Conference, Vol. 3, pp. 1365-1378, Malaga, Spain, 22-25 August, 1994.
• 8. Taylor, P.M., Presentation and Gripping of Flexible Materials, Assembly Automation, Vol. 15 No. 3, pp.33-35, 1995.
• 9. Taylor, P.M., Wilkinson, A.J., Gibson, I., Palmer, G.S., and Gunner, M.B., The automa-tion of complex fabric handling tasks requiring out of plane manipulation, IEEE-91 icar, 5d1 int. Conf. On advanced robotics in unstructure envir., pp. 775-780, 1991.
• 10. Erzincanlı, F., A Non-Contact End Effector for Robotic Handling of Non-Rigid Materials, Ph.D. Thesis, University of Salford, Salford, 1995.
• 11. Özçelik, B., Dokunmasız Robot Eliyle Kumaşların Kaldırılması, Doktora Tezi, SAU, Sakarya, 1999.
• 12. Asawa, G.L., Pande, P.K., ve Godbole, P.N., Radial Turbulent Flow Between Parallel Plates, Journal of Hydraulic Engineering, Vol. 111/4, pp:695-712, 1985.
• 13. Dore, A.M., He, D., Erzincanlı, F., and SHARP, J.M., Linear drive manipulators and non-contact gripping, Proceedings of EURISCON'94, Euro-pean Robotics and Intelligent Systems Conference, Vol. 2, pp. 543-548, Malaga, Spain, 22-25 August, 1994.
• 14. Mori, K, A Theoretical Investigation of Pressure Depression in Externally Pressurised Gasi Lubri-cated Circular Thrust Bearings, J. of Basic Eng., pp: 201-208, June, 1961.
• 15. Asawa, G.L., Pande, P.K., ve Godbole, P.N., Radial Turbulent Flow Between Parallel Plates, Journal of Hydraulic Engineering, Vol. 111/4, pp:695-712, 1985.
• 16. Gülbaran, Emir, Ünit Operasyonları, McCabe-Smith'den çeviri, Matbaa Teknisyenleri Koll. Şti., Ankara, 1981.