Geliştirilmiş Yüksek Mukavemetli Çeliklerin Servo Pres Kullanılarak Bükülmesi
Geleneksel olarak bir çeliğin mukavemetinin artması ile beraber şekillenebilirliği azalmaktadır. Son yirmi yılda çelik üreticileri hem yüksek mukavemeti hem de yüksek şekillenebilirliği elde etmek amacıyla çok sayıda yeni sınıf çelikler üretmişlerdir. Üretilen bu yeni sınıf çeliklerin, çarpışma performansları ve yorulma ömürleri önemli ölçüde geliştirilmelerine rağmen, geliştirilmiş yüksek mukavemetli çelikler (AHSS) pres hatlarında hâlâ çok yüksek pres tonajlarına ve kontrolü zor geri yaylanma problemlerine sebep olmaktadırlar. Ayrıca, bazı geliştirilmiş yüksek mukavemetli çelikler, örnek olarak TRIP ve TBF sınıfı çelikler- dönüşüm kaynaklı plastisite özelliği göstermektedirler. Bu olguya göre, mikro yapıdaki kalıntı östenit, plastik deformasyon altında mukavemeti çok daha yüksek olan martenzite dönüşmektedir. Çift fazlı (DP) çelikler ile ilgili önceki yapılan çalışmalar, optimize edilmiş şekillendirme hızı profilinin, AHSS çeliklerin şekillenebilirliğini arttırdığını göstermiştir. Bu çalışmada, TWIP, TBF ve Q&P çeliklerinin büküm sonrası geri yaylanmalarının servo presler ile sağlanan farklı kurs profillerindeki değişimi deneysel ve nümerik olarak incelenmiştir.
___
- 1. Billur, E.; Dykeman, J.; Altan, T.: Three
generations of advanced high strength steels for
automotive applications. In: Stamping Journal,
Mar/Apr issue, 2014, p. 12-13
- 2. FCA Turkey: Private Communication, 2015.
3. Maggi, S.; Federeci , C.; D’aiuto, F.: TWIP Steel
application on the Fiat Nuova Panda body.
Presented in: Materials in Car Body Engineering
2012
- 4. Butz, A.; Zapara, M.; Helm, D.: Modeling High-
Strength and Highly-Ductile Sheet Metals from
TWIP-Steels. In: Fraunhofer IWM, 2015
- 5. Busch, C.; Hatscher, A.; Behrens, B.-A.;
Bouguecha, A.; Vucetic, M.; Bonk, C.; Huinik ,
S.: Numerical and experimental investigations of
deformation behavior of high-manganese TWIPsteels
in automotive industry. Presented in:
Posco Global EVI Forum, 2014
- 6. Renault Media Services, In:
http:/media.renault.com
- 7. Automotive Circle International: How do you
judge the market potential of TWIP steels in car
body series production? Presented in: Materials
in Car Body Engineering, 2012
- 8. POSCO: Automotive Steel Handbook, 2015
- 9. Lee, K.: Introduction to Development and
Application of Automotive Steels of POSCO.
Presented in: Posco Gloval EVI Forum, 2014
- 10. Nam, J-B.: Development of new auto steels and
application technology. Presented in: China
Automotive Steel Conference, 2013
- 11. BaoShan Iron and Steel Co., Ltd.: Automotive
Advanced High Strength Steels, Catalogue,
2013.
- 12. Gao, M.: Sustainable steel solutions for Chinese
cars. Presented in: Green Manufacturing – the
Future of Steel and Automobile,
WorldAutoSteel, 2013
- 13. AnSteel Group: Progress of Advanced High
Strength Steel in AnSteel. Presented in: Vehicle
and Home Application Steel Research Institute,
2014
- 14. Schneider, M.; Gramling, M.: High Strength and
Ductility – A New Steel Generation for Further
Developments. Presented in: Automotive Expo,
2013
- 15. Kimura, T.: Formability of TRIP Type Bainitic
Ferrite Steel Sheet. In: Kobelco Technology
Review, 2011, p. 85-89
- 16. Jacque, S.; Obayashi, K.: Renault and Nissan
Light weight body engineering strategy.
Presented in: Strategies in Car Body
Engineering, 2012
- 17. Kondo, T.; Ishiuchi, K .: 1.2GPa Advanced
High Strength Steel with High Formability. In:
SAE Technical Paper, 2014-01-0991, January
2014
- 18. Worldautosteel: 2015 Nissan Murano Redesigns
with AHSS. In: .
http://www.worldautosteel.org/why-steel/steelmuscle-
in-new-vehicles/2015nissan-muranoredesigns-
with-ahss/
- 19. [19] ArcelorMittal: Steels for cold stamping -
Fortiform®, Catalogue, 2014
- 20. Huijin, D.; Shuli, L.; Jie, Y.; Hongxin, Y.;
Kebin, B:, The automobile steel of the third
generation in B-pillar reinforced panel. In:
Engineering Sciences, 10-6, 2012, p. 20-22
- 21. Hsiung, G.: Advanced High-Strength Steel
Stamping. Presented in DOE Merit Review,
2012
- 22. Thomas, G.A.; De Moor, E.; Speer, J.G.: Tensile
Properties Obtained by Q&P Processing of Mn-
Ni Steels With Room Temperature Quench
Temperatures, In: Proceedings of Intl. Symp. on
New Developments in Advanced HighStrength
Sheet Steels 2013, p. 153-165
- 23. Bosch Rexroth AG: 4/3 servo directional control
valve with mechanical position feedback,
Catalogue, 2010
- 24. Voith Turbo H + L Hydraulic GmbH & Co. KG:
Hydraulic Press Drive PSH, Catalogue, 2013
25. Osakada, K.; Mori, K.; Altan, T.; Groche, P.:
Mechanical servo press technology for metal
forming. In: CIRP Annals - Manufacturing
Technology, 60, 2011, p. 651–672
- 26. Hoden Seimitsu Kako Kenkyusho Co. Ltd.:
ZenFormer Direct Drive Digital Servo Press,
Catalogue, 2013.
- 27. Yadav, A.; Kaya, S.; Groseclose, A.:
Electromechanical Servo-Drive Presses. In:
Sheet Metal Forming – Fundamentals, Editors:
Altan, T.; Tekkaya, A.E., 2012, p. 161-180
- 28. Wegener, K.: Forming Presses
(Hydraulic,Mechanical, Servo). In: CIRP
Encyclopedia of Production Engineering,
Editors: Laperriére, L.; Reinhart, G., 2014, p.
547-553
- 29. ASTM International: Standard Test Methods for
Tension Testing of Metallic Materials,
Designation E8/E8M-09, 2009.
- 30. Mori, K.; Akita, K.; Abe, Y.: Springback
behaviour in bending of ultra-highstrength steel
sheets using CNC servo press. In: International
Journal of Machine Tools & Manufacture 47,
2007, p. 321–325
- 31. Yang, X.; Kardes, N.; Choi, C; Altan, T.:
Investigating springback in bending of advanced
high strength steel. In: Stamping Journal,
Nov/Dec 2010, p. 8-9