ETA DİYAGRAMLARI HAZIRLAMAK İÇİN BİR «COMPUTER» METODU (PROGRAM FORTRAN IV-H LİSANINDADIR; IBM 360/67 «COMPUTER»I KULLANILMIŞTIR)
Beta diyagramları hazırlamakta kullanılacak bir metot IBMOS/360 (FORTRAN H)
«computer»1 için programlanmıştır. Çizim işlemi 570 CALCOMP sistemi kullanılarak yaptırılmıştır.
Program, segmanların arakesitlerinin izlerinin küresel koordinatlarını bulmakta, bu noktalan stereografik
projeksiyon prensiplerini kullanarak ekvatoral bir düzleme izdüşürmektedir. Bu izdüşürülen
noktalan bir kutupsal eşit alan ağına (Billing ağı) yerleştirmek için gerekli ayarlamaları yapmaktadır.
Program, daha sonra, izdüşürülen noktaların dağılışının şiddetini hesaplamak için şu işlemleri
yerine getirmektedir : (a) Her noktanın değerini, aynı bölgedeki diğerlerine eklenebilir şekilde,
Mellis metodu kullanarak yüzde birlik bir sahaya dağıtmakta; (b) Primitif dairenin dışına düşen
değerleri karşıtlarına eklemekte; (c) Uygun bir kontur aralığı seçerek konturlar arasındaki değerleri
bütünlemektedir. Son dağılım şekli hem «line printer»den bir «output> şeklinde, hem de
«CALCOMP plotter»dan 20 cm lik bir Billing ağı üzerinde elde edilmektedir. Bu makalede tarif
edilmiş olan «computer» programından, ufak değişikliklerle, yapısal jeolojide ve yapısal petrolojide
fabrik analizlerinde kullanılan çeşitli diyagramları hazırlamak için de yararlanılabilir.
A Computer Method for Preparing Beta Diagrams (program in Fortran IV-H, using an IBM 360/67 computer)
A method for preparing beta diagrams has been programmed for the IBM
OS/360 (FORTRAN H) computer. The 570 CALCOMP system has been used to output the resultant
plots. The program finds spherical coordinates of intersections of traces of individual segments,
then projects them on an equatorial plane by using stereographic projection principles. It
makes necessary corrections to fit the projected points to an equal area polar net (Billing net).
The program, then, to calculate intensity of distribution of projected points performs the following
tasks: (a) distributes the additive value of each point to a one percent domain by using the Mellis
method; (b) takes care of the values which might fall outside the primitive circle; (c) chooses a
suitable contour interval and integrates the values between contours. The final distribution is displayed
both by an output from line printer and an output from CALCOMP plotter on a 20-cm
Billing net. The computer program described in this report may be used, by slight alterations, to
prepare various diagrams used in structural geology and in fabric data analysis in structural petrology.
___
NOBLE, D.C. & EBERLY, S.W. (1964) : A digital computer procedure for preparing beta diagrams.
Am. Journal of Sci., v. 262, pp. 1124-1129.
RAMSAY, J.G. (1967) : Folding and fracturing of rocks. McGraw-HilI Co. 568 p.
ROBINSON, P.; ROBINSON, R. & GARLAND, S. (1963) : Preparation of beta diagrams in
structural geology by digital computer. Am. Journal Sci., v. 261, pp. 913-928.
TURNER, F.J. & WEISS, L.E. (1963) : Structural analysis of metamorphic tectonites. McGrawHill
Co., 545 p.
VISTELIUS, A.B. (1966) : Structural diagrams. Pergamon Press, 178 p.