___

• Amikiya, C. A. 2014. Characterisation of iron ore - a case study of Mount Tokadeh, Western Nimba Area, Liberia. Master of Philosophy in Chemical Engineering, Kwame Nkrumah University of Science and Technology, 119.
• Amiri, S. H. 2019. Investigation of efficiency of magnetic separation methods for processing of low-grade iron pigments ore (RED Ochre). International Journal of Mineral Processing and Extractive Metallurgy 4(1), 18-25.
• Arol, A. I., Aydoğan, A. 2004. Recovery enhancement of magnetite fines in magnetic separation. Colloids and Surfaces A: Physicochemical and Engineering Aspects 232, 151-154.
• Barari, H. B., Sen, P., Sengupta, P. 1979. Generalized approach for multi-component multi-stage separation efficiency. Society of Mining Engineers AIME 266, 1901–1904.
• Chatterjee, A. 1998. Role of particle size in mineral processing at Tata Steel. International Journal of Mineral Processing 53, 1-14.
• Das, B., Prakash, S., Das, S. K., Reddy, P. S. R. 2008. Effective beneficiation of low grade iron ore through jigging operation. Journal of Minerals and Materials Characterization and Engineering 7, 27-37.
• Dobbins, M., Dunn, P., Sherell, I. 2009. Recent advances in magnetic separator designs and applications. The 7th International Heavy Minerals Conference What next, The Southern African Institute of Mining and Metallurgy, 63-70.
• Drzymala, J. 2006. Atlas of upgrading curves used in separation and mineral science and technology. Physicochemical Problems of Mineral Processing 40, 19-29.
• Drzymala, J. 2007. Atlas of upgrading curves used in separation and in mineral science and technology. Physicochemical Problems of Mineral Processing 41, 27-35.
• Drzymala, J. 2008. Atlas of upgrading curves used in separation and mineral science and technology. Physicochemical Problems of Mineral Processing 42, 75-84.
• Dworzanowski, M. 2012. Maximizing the recovery of fine iron ore using magnetic separation. Journal of the Southern African Institute of Mining and Metallurgy 112, 197-202.
• Hearn, S. 2002. The use of hindered settlers to improve iron ore gravity concentration circuits. Mineral processing plant design, practice, and control, Colorado. Society for Mining, Metallurgy and Exploration Incorporation.
• Irannajad, M., Salmani Nuri, O., Allahkarami, E. 2018. A new approach in separation process evaluation. Efficiency ratio and upgrading curves. Physicochemical Problems of Mineral Processing 54, 847-57.
• Lin, I. J., Knish-Bram, M., Rosenhouse, G. 1997. The beneficiation of minerals by magnetic jigging, Part 1. Theoretical aspects. International Journal of Mineral Processing 50, 143-59.
• Mahmoud, M. A. 2010. Statistical design application and analysis of separation efficiency in Davis Tube tester. Journal of Engineering Sciences, Assiut University 38, 1047-1058.
• Makhija, D., Mukherjee, A. K., Ghosh, T. K. 2013. Preconcentration feasibility of gravity and magnetic techniques for banded hematite Jasper. International Journal of Mining Engineering and Mineral Processing 2, 8-15.
• Mukherjee, A. K. 2009. New method for evaluation of gravity separation processes. Mineral Processing and Extractive Metallurgy Review 30, 191-210.
• Mukherjee, A. K., Mishra, B. K. 2006. An integral assessment of the role of critical process parameters on jigging. International Journal of Mineral Processing 81, 187-200.
• Mukherjee, A. K., Dwivedi, V. K., Mishra, B. K. 2005a. Analysis of a laboratory jigging system for improved performance. Minerals Engineering 18, 1037-1044.
• Mukherjee, A. K., China, M., Rai, S. K., Sinha, M. 2005b. Flowsheet development for Joda classifier fines. R and D Reports 60(4), 8.
• Mukherjee, A. K., Bhattacharjee, D., Mishra B. K. 2006. Role of water velocity for efficient jigging of iron ore. Minerals Engineering 19, 952-59.
• Özcan, Ö., Aghlmandı Harzanagh, A., Orhan, E., Ergün, Ş. 2021. Beneficiation and flowsheet development of a low grade iron ore: a case study. Bulletin of the Mineral Research and Exploration 165, 235-251.
• Rayner, J. G., Napier-Munn, T. J. 2000. The mechanism of magnetics capture in the wet drum magnetic separator. Minerals Engineering 13, 277-285.
• Schulz, N. F. 1979. Separation efficiency. Transactions of the Society of Mining Engineers. The American Institute of Mining, Metallurgical, and Petroleum Engineers 247, 81–87.
• Seifelnassr, A., Moslim, E., Abouzeid, A. Z. 2012. Effective processing of low-grade iron ore through gravity and magnetic separation techniques. Physicochemical Problems of Mineral Processing 48, 567-578.
• Shivakumar, I. A., Chinthapudi, E., Ho-Seok, J., Barada, K. M,, Jan, D. M. 2017. Selection of gravity separators for the Beneficiation of the Uljin Tin Ore. Mineral Processing and Extractive Metallurgy Review 38, 54-61.
• Sousa, R. J. C. 2020. Assessment of separation efficiency in mineral processing using the ultimate upgrading concept-a holistic window to integrate mineral liberation data. PhD Dissertation, Department of Mining Engineering, Faculty of Engineering of University of Porto.
• Suthers, S. P., Nunna, V., Tripathi, A., Douglas, J., Hapugoda, S. 2014. Experimental study on the beneficiation of low-grade iron ore fines using hydrocyclone desliming, reduction roasting and magnetic separation. Mineral Processing and Extractive Metallurgy 123(4), 212-227.
• Vijayendra, H. G. 2001. A Handbook on Mineral Dressing. Vikas Publishing House, New Delhi, 271–279.
• Wills, B. A., Napier-Munn, T. J. 2006. Mineral Processing Technology, 6th Edition Australia. Elsevier Science and Technology Books.
• Wills, B. A., Finch, J. A. 2016. Wills’ Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery, 8th Edition, Elsevier.
• Xiong, D., Liming, L., Holmes, R. 2015. Developments in the physical separation of iron ore: magnetic separation. iron ore. Mineralogy, Processing and Environmental Sustainability 66, 283-307.