2022 Cilt: 6 - Sayı: 1
İÇİNDEKİLER
Optimization of process parameters of medium carbon steel joints joined by MIG welding using Taguchi method
Bahattin İŞCAN, Mehmet Şükrü ADİN
Solar assisted heat pump modelling
Denizhan ÖZENEN, Mustafa Turhan ÇOBAN
A mechanical model and stress-strain response of the biceps brachii under static load
Kasım SERBEST, Hamid Asadi DERESHGİ, Sema Nur ŞAHİN, Büşra BALIK
Assessment of binary metallic-based nanoparticles addition effects on performance, emission, and vibration behaviors of a diesel engine
Sinan KEİYİNCİ, Abdülkadir YAŞAR, Mehmet BİLGİLİ
Surface pressure effect on rivet-connected l-corner plates exposed to axial and flexural loadings
Mustafa Murat YAVUZ
Production and mechanical characterization of polyethylene matrix composites with the addition of linen and cotton waste fabric filler materials
Önder ALBAYRAK, Mehmet İPEKOĞLU, Hasan GÜNDÜZ
Effect of repair parameters on composite plates under low velocity impact
Mustafa ALBAYRAK, Mete Onur KAMAN, Mustafa GÜR
Influence of ecological Juniperus Drupacea cone powder on mechanical and physical properties of fiber-reinforced composite friction materials
Sait ARAS, Harun SEPETÇİOĞLU
Evaluation of fracture toughness and Charpy V-notch test correlations for selected Al alloys
Rasid Ahmed YILDIZ
Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel
Volkan ONAR, Mine SULAK, Arzum IŞITAN, Hakan ÖZ, Yusuf Abdulkadir ALİ
14.3b 5.6b
Arşiv
Cilt: 7 - Sayı : 1
Cilt: 7 Sayı : 3
Cilt: 7 Sayı : 4
Cilt: 6 - Sayı : 2
Cilt: 6 - Sayı : 1
Cilt: 6 - Sayı : 3
Cilt: 6 - Sayı : 4
Cilt: 5 - Sayı : 3
Cilt: 5 - Sayı : 4
Cilt: 5 - Sayı : 1
Cilt: 5 - Sayı : 2
Cilt: 5 Sayı : 1
Cilt: 4 - Sayı : 3
Cilt: 4 - Sayı : 4
Cilt: 4 - Sayı : 2
Cilt: 4 - Sayı : 1
Cilt: 4 Sayı : 1
Cilt: 3 - Sayı : 4
Cilt: 3 - Sayı : 2
Cilt: 3 - Sayı : 3
Cilt: 3 - Sayı : 1
Cilt: 2 - Sayı : 2
Cilt: 2 - Sayı : 3
Cilt: 2 - Sayı : 4
Cilt: 2 - Sayı : 1
Cilt: 2 Sayı : 2
Cilt: 1 - Sayı : 4
Cilt: 1 - Sayı : 3
Cilt: 1 - Sayı : 2
Cilt: 1 - Sayı : 1