EFFECT of IONIC LIQUID CONTENT on MONOLITHIC STRUCTURE of AMINE-MEDIATED SILICA AEROGEL via AMBIENT PRESSURE DRYING

In this study, amine-mediated silica aerogels dried under the ambient conditions in monolithic form were prepared by following sol-gel method. 3-aminopropyltriethoxysilane (APTES) was involved to the synthesis as a silica co-precursor. Imidazolium based short-chain ionic liquids (ILs) were incorporated into the silica gel structure to control the gel shrinkage within the pores, as well as to eliminate the capillary effect during the solvent evaporation. A production procedure was developed to explore the synergistic effect of ionic liquids and amine functionalized silica precursor on the textural and chemical properties of the final silica gels. Surface modifications of the samples were performed by using 3-Methacryloxypropyltrimethoxysilane (MEMO) to ensure hydrophobic characteristics. To reveal the chemical and morphological characteristics of the resultant material, various analyses were conducted. SEM and FTIR analyses were performed to investigate the morphological and chemical structure, whereas TGA analysis was carried out to determine the thermal stability of the silica gels. As a result, ionic liquid embedded sample was obtained in a monolithic structure with a low density (0.45 g/cm3) and had a good thermal stability (up to 381 °C). Contact angle measurement also demonstrated that the desired monolithic sample has hydrophobic characteristic with a water contact angle value of 113˚.

Keywords:

Ionic liquid, silica aerogel APTES, ambient pressure drying, monolithic structure,

PDF

___

[10] C. M. Wu, S. Y. Lin, and H. L. Chen, “Structure of a monolithic silica aerogel prepared from a short-chain ionic liquid,” Microporous Mesoporous Mater., vol. 156, pp. 189–195, 2012.
[11] A. Hilonga, J. K. Kim, P. B. Sarawade, and H. T. Kim, “Low-density TEOS-based silica aerogels prepared at ambient pressure using isopropanol as the preparative solvent,” J. Alloys Compd., vol. 487, no. 1–2, pp. 744–750, 2009.
[12] T. Y. Wei, T. F. Chang, S. Y. Lu, and Y. C. Chang, “Preparation of monolithic silica aerogel of low thermal conductivity by ambient pressure drying,” J. Am. Ceram. Soc., vol. 90, no. 7, pp. 2003–2007, 2007.
[13] R. Garay Martinez, E. Goiti, G. Reichenauer, S. Zhao, M. Koebel, and A. Barrio, “Thermal assessment of ambient pressure dried silica aerogel composite boards at laboratory and field scale,” Energy Build., vol. 128, pp. 111–118, 2016.
[14] Z. T. Mazraeh-Shahi, A. M. Shoushtari, M. Abdouss, and A. R. Bahramian, “Relationship analysis of processing parameters with micro and macro structure of silica aerogel dried at ambient pressure,” J. Non. Cryst. Solids, vol. 376, pp. 30–37, 2013.
[15] H. Yang, X. Kong, Y. Zhang, C. Wu, and E. Cao, “Mechanical properties of polymer-modified silica aerogels dried under ambient pressure,” J. Non. Cryst. Solids, vol. 357, no. 19–20, pp. 3447–3453, 2011.
[16] A. Pons, L. Casas, E. Estop, E. Molins, K. D. M. Harris, and M. Xu, “A new route to aerogels: Monolithic silica cryogels,” J. Non. Cryst. Solids, vol. 358, no. 3, pp. 461–469, 2012.
[17] M. Ivanova, S. Kareth, E. T. Spielberg, A. V. Mudring, and M. Petermann, “Silica ionogels synthesized with imidazolium based ionic liquids in presence of supercritical CO2,” J. Supercrit. Fluids, vol. 105, pp. 60–65, 2014.
[18] J. Zhang, Y. Ma, F. Shi, L. Liu, and Y. Deng, “Microporous and Mesoporous Materials Room temperature ionic liquids as templates in the synthesis of mesoporous silica via a sol – gel method,” vol. 119, pp. 97–103, 2009.
[19] M. Ivanova, S. Kareth, and M. Petermann, “Supercritical carbon dioxide and imidazolium based ionic liquids applied during the sol–gel process as suitable candidates for the replacement of classical organic solvents,” J. Supercrit. Fluids, vol. 132, no. July 2017, pp. 76–82, 2018.
[1] M. Li, H. Jiang, D. Xu, O. Hai, and W. Zheng, “Low density and hydrophobic silica aerogels dried under ambient pressure using a new co-precursor method,” J. Non. Cryst. Solids, vol. 452, pp. 187–193, 2016.
[20] A. Karout and A. C. Pierre, “Silica xerogels and aerogels synthesized with ionic liquids,” vol. 353, pp. 2900–2909, 2007.
[21] A. Karout and A. C. Pierre, “Silica gelation catalysis by ionic liquids,” Catal. Commun., vol. 10, no. 4, pp. 359–361, 2009.
[22] A. Dourbash, S. Motahari, and H. Omranpour, “Effect of water content on properties of one-step catalyzed silica aerogels via ambient pressure drying,” J. Non. Cryst. Solids, vol. 405, pp. 135–140, 2014.
[23] S. Li, H. Ren, J. Zhu, Y. Bi, Y. Xu, and L. Zhang, “Facile fabrication of superhydrophobic, mechanically strong multifunctional silica-based aerogels at benign temperature,” J. Non. Cryst. Solids, vol. 473, no. July, pp. 59–63, 2017.
[24] H. Yu, X. Liang, J. Wang, M. Wang, and S. Yang, “Preparation and characterization of hydrophobic silica aerogel sphere products by co-precursor method,” Solid State Sci., vol. 48, pp. 155–162, 2015.
[2] Z. Li, X. Cheng, S. He, X. Shi, L. Gong, and H. Zhang, “Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance,” Compos. Part A Appl. Sci. Manuf., vol. 84, pp. 316–325, 2016.
[3] J. Laskowski, B. Milow, and L. Ratke, “Aerogel-aerogel composites for normal temperature range thermal insulations,” J. Non. Cryst. Solids, vol. 441, pp. 42–48, 2016.
[4] A. Soleimani Dorcheh and M. H. Abbasi, “Silica aerogel; synthesis, properties and characterization,” J. Mater. Process. Technol., vol. 199, no. 1, pp. 10–26, 2008.
[5] K. E. Parmenter, “Mechanical properties of silica aerogels,” J. Non. Cryst. Solids, no. November 1996, pp. 179–189, 1998.
[6] J. E. Amonette and J. Matyáš, “Functionalized silica aerogels for gas-phase purification, sensing, and catalysis: A review,” Microporous Mesoporous Mater., vol. 250, pp. 100–119, 2017.
[7] H. Maleki, L. Dur, and C. A. Garc, “Synthesis and Biomedical Applications of Aerogels: Possibilities and Chal- lenges Hajar,” Adv. Colloid Interface Sci., vol. 236, pp. 1–27, 2016.
[8] C. Buratti, F. Merli, and E. Moretti, “Aerogel-based materials for building applications: Influence of granule size on thermal and acoustic performance,” Energy Build., vol. 152, pp. 472–482, 2017.
[9] S. Berthon-Fabry, C. Hildenbrand, P. Ilbizian, E. Jones, and S. Tavera, “Evaluation of lightweight and flexible insulating aerogel blankets based on Resorcinol-Formaldehyde-Silica for space applications,” Eur. Polym. J., vol. 93, no. May, pp. 403–416, 2017.