BOKSİTLERDEN ALÜMİNA ÜRETİM SÜRECİNDE YER ALAN BUHARLAŞTIRMA CİHAZLARINDA OLUŞAN SİLİKATLARIN ANALİZİ

Büyük çoğunluğu alüminyum silikatlar halinde bulunan alüminyum, yeryüzünde en çok bulunan üçüncü elementtir. Bugün dünya alümina üretiminin %90’ından fazlası Bayer prosesi ile gerçekleştirilmektedir. Boksit içindeki silis alkali kaybına sebep olmaktadır. Bu proseste izlenen operasyon kademeleri, boksitin kırılması, öğütülmesi, çözünürleştirilmesi, oluşan çamurun ayrılması, kalsinasyon ve buharlaştırmadır. Boksitlerden alümina üretim sürecinde buharlaştırma bölümü, devreye zorunlu olarak giren suların çözeltiden ayrılması işleminin yapıldığı yer olması bakımından büyük önem taşır. Oluşan sodyum alüminyum silikatların genel formülü şu şekildedir:  Bu çalışmada, buharlaştırma teknolojisi ve boksitlerden alümina üretim sürecinde buharlaştırma bölümünde oluşan sodyum alüminyum silikatların analizi verilmiştir.

THE ANALYSIS OF THE SILICATES OCCURING IN THE EVAPORATION EQUIPMENT IN THE ALUMINA PRODUCTION FROM BAUXITE

Aluminum is the third most abundant element in the earth’s crust, where it occurs largerly in the form of  aluminosilicates. Evaluation of bauxites for alumina production is based on the fact that more than 90 per cent of the world’s total alumina is produced by the Bayer Technology in which aluminium oxide and sodium hydroxide losses, at alkaline digestion of bauxite, are proportional to the reactive silicium dioxide content of bauxite. The most important operations of the technology are bauxite preparation, digestion, red mud seperation, washing, calcination and evaporation. As it is place of process where compulsorily entering water separate from the solution, evaporation section in the alumina production from bauxite is very significant. The composition of the sodium-aluminium hydrosilicate formed can be given by the following summarized formula:  In this study, evaporation technology and sodium-aluminium hydrosilicate of the evaporation process in the alumina production from bauxite were analyzed.

___

  • [1] Fulda, W. und Ginsberg, H., Tonerde und Aluminum, Walter de Gruyter Co., Berlin, 1994.
  • [2] Gmelins Handbuch der Anorganischen Chemie, Aluminum, Teil B., Verlag Chemie, Veinheim, 1963.
  • [3] Kirk, R.E., and Othmer, D.F., Encyclopedia of Chemical Technology, Interscience Encylopedia, New York, 2007.
  • [4] Csanady, A., Imre, A. And Orban, M., Physico-Chemical Characteristics and Analysis of Bauxite, Red Mud, Alumina Hydrate and Alumina, ALUTERV-FKI, Budapest, 1979.
  • [5] Petrucci, R.H., Harwood W.S., Herring, F.G., Madura, J.D. General Chemistry, Prentice Hall, New Jersey, 2007.
  • [6] Sigmond, G., Solymar, K., Toth, P., Chemical Background and Technology of Processing Bauxite to Alumina, ALUTERV-FKT, Budapest, 1979.
  • [7] Şahin, S., Seydişehir Aluminyum Tesisleri Grup Başkanlığında Yapılan Çalışma Notları
  • [8] Gado, P., Orban, M., Mineralogical and Textural Investigation of Bauxite, Red Mud and Alumina, ALUTERV-FKI, Budapest, 1979.
  • [9] Şahin, S., Correlation Between Sodium and Iron Oxide Contents of Aluminum Hydroxide Samples, Jo. Chem. Soc. Pak., Vol.16, No.3, 169–174, 1994.
  • [10] Lanford, O.E., Using Chemistry, Mc Graw Hill Book Co., London, 1959.
  • [11] Şahin, S., Correlation Between Silicon Dioxide and Aluminium Oxide Contents of Bauxide Samples, Hydrometallurgy, Vol.44, No.1, 185–190, 1997.
  • [12] Şahin, S., Correlation Between Silicon Dioxide and Iron Oxide Contents of Red Mud Samples, Hydrometallurgy, Vol.47, No.1, 371–376, 1998.
  • [13] Şahin, S., Mathematical Relationship Between Sodium Oxide and Aluminum Oxide Contents of Alumunate Solution Samples, J. Chem. Soc. Pak., Vol.25, No.4, 304–308, 2003.
  • [14] Solymar, K., Zoldi, J., Toth, A.C. and Feher, I., Manual for Laboratory, ALUTERV-FKI, Budapest, 1979.
  • [15] Solymar, K., Zsindely, S., Der Einfluss der Organischen Substans bei der Aluminumoxiderzeugung nach Bayer, Freiberger Forschungshefte, B103, 1965.
  • [16] Sato, C., Kazama, S., Behavior of Organic Matter in Aluminate Solution, AIME, A71.
  • [17] Lever, G., Identification of Organics in Bayer Liquar, Light Metals, Vol.2, 1978.
  • [18] Hermann, E., Jung, M., Über den Abbau von Organischen Substanzen bei der Verarbeitung von Australischem Gove-Bauxit, IGSOBA Nice, 1973.