R4 Kalite Açık Deniz Demirleme Zinciri Çeliğine Uygulanan Bor-Alüminid Kaplamanın Çukurlaşma ve Tribo-Korozyon Davranışına Etkisi

Açık deniz demirleme sistemleri aşınmaya, korozyona ve yorulma hasarına karşı hassastır ve bu da tribokorozyon direncini geliştirmeyi gerekli kılar. Bu çalışma, boro-aluminyumlama işleminin deniz ortamında R4 çeliğinin korozyon ve tribokorozyon direnci üzerindeki etkilerini değerlendirmeyi amaçlamaktadır. Boro-alüminid kaplama, az miktarda FeB, Fe2B ve Fe2Al5 fazı ile baskın faz olarak FeAl varlığını ortaya koyan SEM, EDS ve XRD ile karakterize edildi. Sonuçlar, boron-alüminid kaplamanın R4 çeliğinin korozyon direncini iyileştirdiğini, kaplama ile çelik substrat arasında bir bariyer görevi gördüğünü ve aşınma koşullarında bile korozyon direncini koruduğunu gösterdi. Bulgular, boron-alüminid kaplamanın deniz ortamlarında R4 çeliğinin korozyon ve tribokorozyon direncini potansiyel olarak iyileştirebileceğini ve düşük alaşımlı çeliklerin termokimyasal kaplaması için pasif malzemelere göre uygun maliyetli bir alternatif haline getirebileceğini göstermektedir.

Anahtar Kelimeler:

HSLA çeliği, boro-aluminyumlama, korozyon, tribokorozyon, deniz suyu

Effect of Boron-Aluminide Coating Applied on R4 Grade Offshore Mooring Chain Steel on Pitting and Tribo-Corrosion Behaviour

Offshore mooring systems are susceptible to wear, corrosion, and fatigue damage, making improving their tribocorrosion resistance essential. This study aims to evaluate the effects of boron-aluminizing treatment on the corrosion and tribocorrosion resistance of R4 steel in a marine environment. The boron-aluminide coating was characterized by SEM, EDS, and XRD, revealing the presence of FeAl as the dominant phase with minor amounts of FeB, Fe2B, and Fe2Al5 phases. Results showed that the boron-aluminide coating improved the corrosion resistance of R4 steel, acting as a barrier between the coating and the steel substrate and maintaining its corrosion resistance even under wear conditions. The findings suggest that the boron-aluminide coating can potentially improve the corrosion and tribocorrosion resistance of R4 steel in marine environments, making it a cost-effective alternative to passive materials for the thermochemical coating of low-alloy steels.

Keywords:

HSLA steel, boro-aluminizing, corrosion, tribocorrosion, seawater,

PDF

___

Alkan S., Comparative Hydrodynamic Analysis of Catenary and Tension Leg Moored Floating Offshore Wind Turbine. 1st International Conference on Energy Systems Engineering, November, 291–298, 2017.
Alkan S., Enhancement of Marine Corrosion and Tribocorrosion Resistance of Offshore Mooring Chain Steel By Aluminizing Process. Brodogradnja, 73(4), 131–159, 2022(a).
Alkan S., Evaluation of pitting susceptibility and tribocorrosion behaviors of AISI 304 stainless steel in marine environments. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237(4), 808-823, 2022(b).
Alkan S., Gök M. S. (2021). Effect of sliding wear and electrochemical potential on tribocorrosion behaviour of AISI 316 stainless steel in seawater. Engineering Science and Technology, an International Journal, 24(2), 524–532.
Alkan S., Gök M. S., Influence of plasma nitriding pre-treatment on the corrosion and tribocorrosion behaviours of PVD CrN, TiN and AlTiN coated AISI 4140 steel in seawater. Lubrication Science, 34(2), 67–83, 2022.
Angulo Á., Tang J., Khadimallah A., Soua S., Mares C., Gan T. H., Acoustic emission monitoring of fatigue crack growth in mooring chains. Applied Sciences (Switzerland), 9(11), 2019.
Du J., Wang H., Wang S., Song X., Wang J., Chang A., Fatigue damage assessment of mooring lines under the effect of wave climate change and marine corrosion. Ocean Engineering, 206(April), 2020.
Erdogan A., Boriding Temperature Effect on Micro-Abrasion Wear Resistance of Borided Tool Steel. Journal of Tribology, 141(12), 2019.
Erdogan A., Yener T., Doleker K. M., Korkmaz M. E., Gök M. S., Low-temperature aluminizing influence on degradation of nimonic 80A surface: Microstructure, wear and high temperature oxidation behaviors. Surfaces and Interfaces, 25, 101240, 2021.
Günen A., Micro-abrasion wear behavior of thermal-spray-coated steel tooth drill bits. Acta Physica Polonica A, 130(1), 217–222, 2016.
Günen A., Kanca Y., Karahan İ. H., Karakaş M. S., Gök M. S., Kanca E., Çürük A., A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49(11), 5833–5847, 2018.
Günen A., Keddam M., Alkan S., Erdoğan A., Çetin M., Microstructural characterization, boriding kinetics and tribo-wear behavior of borided Fe-based A286 superalloy. Materials Characterization, 186(February), 2022.
Hu T. L., Huang H. L., Gan D., Lee T. Y., The microstructure of aluminized type 310 stainless steel. Surface and Coatings Technology, 201(6), 3502–3509, 2006.
IACS., Unified IACS Requirements Concerning Materials and Welding – W22 Offshore Mooring Chain. DNV-OS-E30(1993), 28, 2013.
Jiajia W. U., Tan F., Zhang D., Yin J., Li E., Corrosion of Copper-bearing High Strength Mooring Chain Steel Affected by Microbes in Seawater. Protection of Metals and Physical Chemistry of Surfaces, 55(6), 1207–1216, 2019.
Li W., Chen H., Li C., Huang W., Chen J., Zuo L., Ren Y., He J., Zhang S., Microstructure and tensile properties of AISI 321 stainless steel with aluminizing and annealing treatment. Materials and Design, 205, 109729, 2021.
López-Ortega A., Arana J. L., Rodríguez E., Bayón R., Corrosion, wear and tribocorrosion performance of a thermally sprayed aluminum coating modified by plasma electrolytic oxidation technique for offshore submerged components protection. Corrosion Science, 143(July), 258–280, 2018.
López-Ortega A., Areitioaurtena O., Alves S. A., Goitandia A. M., Elexpe I., Arana J. L., Bayón R., Development of a superhydrophobic and bactericide organic topcoat to be applied on thermally sprayed aluminum coatings in offshore submerged components. Progress in Organic Coatings, 137(September), 2019.
López-Ortega A., Bayón R., Arana J. L., Evaluation of protective coatings for offshore applications. Corrosion and tribocorrosion behavior in synthetic seawater. Surface and Coatings Technology, 349(May), 1083–1097, 2018.
López-Ortega A., Bayón R., Arana J. L., Arredondo A., Igartua A., Influence of temperature on the corrosion and tribocorrosion behaviour of High-Strength Low-Alloy steels used in offshore applications. Tribology International, 121(November 2017), 341–352, 2018.
López-Ortega A., Bayón R., Arana J. L., Evaluation of protective coatings for high-corrosivity category atmospheres in offshore applications. Materials, 12(8), 2019.
Ma K., Shu H., Smedley P., L’Hostis D., Duggal A., A Historical Review on Integrity Issues of Permanent Mooring Systems. One Petro. Offshore Technology Conference, May, 2013.
Marques F., Da Silva W. M., Pardal J. M., Tavares S. S. M., Scandian C., Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel. Wear, 271(9–10), 1288–1294, 2011.
Moghaddam B. T., Hamedany A. M., Taylor J., Mehmanparast A., Brennan F., Davies C. M., Nikbin, K., Structural integrity assessment of floating offshore wind turbine support structures. Ocean Engineering, 208(May), 107487, 2020.
Ouladsaad S., Allaoui O., Daas A., Boro-aluminizing of XC38 steel. Indian Journal of Chemical Technology, 26(3), 239–243, 2019.
Öksüzoğlu E., Döleker K. M., 904L Paslanmaz Çeliğe Düşük Sıcaklık Alüminyumlamanın Etkisi. European Journal of Science and Technology, 28, 1102–1106, 2021.
Pandim T., Doca T., Figueiredo A. R., Pires F. M. A., Torsional fretting wear experimental analysis of a R3 offshore steel against a PC/ABS blend. Tribology International, 143(July 2019), 2020.
Pardo A., Merino M. C., Coy A. E., Viejo F., Arrabal R., Matykina, E., Pitting corrosion behaviour of austenitic stainless steels - combining effects of Mn and Mo additions. Corrosion Science, 50(6), 1796–1806, 2008.
Shen H.P., Cheng X.Y., Li H., Zhang S.Y., Effect of Copper Alloy Element on Corrosion Properties of High Strength Mooring Chain Steel. HSLA Steels 2015, Microalloying 2015 and Offshore Engineering Steels 2015, 1201–1209, 2016.
Shen Y., Sahoo P. K., Pan Y., A study of composite coatings on 22mncrnimo steel for mooring chain. Surface Review and Letters, 25(3), 2018.
Yener T., Doleker K. M., Erdogan A., High temperature oxidation behavior of low temperature aluminized Mirrax® ESR steel. Materials Research Express, 6(11), 2019.
Zhang X., Hoogeland M., Influence of deformation on corrosion of mooring chain steel in seawater. Materials and Corrosion, 70(6), 962–972, 2019.
Zhang Y., Yin X., Yan F., Effect of halide concentration on tribocorrosion behaviour of 304SS in artificial seawater. Corrosion Science, 99, 272–280, 2015.