Analyzing Optimum Process Parameters in Laser Cutting of EN10025-2 Steel Plate

In this study, optimum process parameters were analyzed for minimum surface roughness and radius error in laser cutting of EN10025-2 (S235JR) cold rolled scoured steel plate. The experiments were designed according to Taguchi method. Feed rate, laser power, frequency and focus were selected as process parameters in laser cutting operations. Based on the analyzing results, the optimum process parameter combinations for minimizing the surface roughness and the radius error were obtained.

Keywords:

Laser Cutting, Surface Roughness, Radius Error Steel Plate, Optimum Parameters,

PDF

___

[1]Belic, I. (1989) A method to determine the parameters of laser cutting, Optics and Laser Technology 21(4), 277-278. [2] Yilbas, B.S. (2008) Laser cutting of thick sheet metals: Effects of cutting parameters on kerf size variations, Journal of Materials Processing Technology 201(1-3), 285-290. [3] Eltawahni, A. (2011) Optimization of process parameters of high-power CO2 laser cutting for advanced materials, Dublin City University, PhD thesis, Dublin City University, Ireland.
[4] Hashemzadeh M. (2014) Investigations into fibre laser cutting, PhD thesis, University of Nottingham, England. [5] Ürgüplü, M., Köksal, S. (2015) The effect of laser cutting process parameters on the quality of metallic components, 3rd International Symposium on Innovative Technologies in Engineering and Science, pp. 866-876, 3-5 June 2015, Valencia, Spain.
[6] Chen, C., Gao, M., Zeng, X. (2016) Relationship between temperature at cut front edge and kerf quality in fiber laser cutting of Al-Cu aluminum alloy, International Journal of Machine Tools and Manufacture, 109, 58-64.
[7] Yilbas, B.S., Shaukat, M.M., Ashraf, F. (2017) Laser cutting of various materials: Kerf width size analysis and life cycle assessment of cutting process, Optics and Laser Technology 93, 67-73.
[8] Kotadiya, D.J., Kapopara, J.M., Patel, A.J., Dalwadi, C.G., Pandya, D.H. (2018) Parametric analysis of process parameter for laser cutting process on SS-304, Materials Today: Proceedings 5(2), 5384-5390.
[9] Joshi, P., Sharma, A., Modi, K. (2018) Optimization of process parameters during laser cutting of Ni-based superalloy thin sheet using response surface methodology, Materials Today: Proceedings 5 (11), 24231–24239.
[10] Sharma, A., Yadavai V. (2018) Experimental analysis of Nd-YAG laser cutting of sheet materials - A review, Optics and Laser Technology 98, 264-280.
[11] Sharifi, M., Akbari, M. (2019) Experimental investigation of the effect of process parameters on cutting region temperature and cutting edge quality in laser cutting of AL6061T6 alloy, Optik 184, 457-463.
[12] Oh, S., Lee, I., Park, Y.B., Ki, H. (2019) Investigation of cut quality in fiber laser cutting of CFRP, Optics and Laser Technology, 113, 129-140.

Journal of Advances in Manufacturing Engineering-Cover

ISSN: 2717-7203
Başlangıç: 2020
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv