EN
EN
Dergiler
Duyurular
İstatistikler
Standartlar
Hakkımızda
İletişim
Journal of Advances in Manufacturing Engineering
Arşiv
Journal of Advances in Manufacturing Engineering
2022
Cilt: 3 - Sayı : 1
MANAGING SUPPLIER SELECTION PROBLEM WITH INTEGRATED FUZZY AHP AND FUZZY VIKOR: A MANUFACTURING COMPANY CASE
EFFECT OF VISCOELASTICITY ON STIFFNESS PREDICTION FOR THE BI-ADHESIVE SINGLE LAP JOINTS
3D SPH-FEM MODELLING OF MICRO MILLING OF Ti-6Al-4V
A PARAMETRIC STUDY FOR DRILLING HIGH QUALITY HOLES ON GLASS FIBER COMPOSITES
2021
Cilt: 2 - Sayı : 2
Designing a special cutting tool for high performance machining of CuZn40Pb2 brass alloy
Hot ultrasonic assisted machining modelling of Ti6Al4V in terms of power consumption
An investigation of the effects of cryogen application direction on Ti6Al4V alloy milling
Mechanical characterization of a stainless steel overlapped assembly welded by MAG process
The Effects of Failure Types on Cold Forging Dies
Cilt: 2 - Sayı : 1
Estimation of the compression strength and surface roughness of the as-built SLS components using weibull distribution
Investigation of the prediction capability of Yld89 yield criterion for highly anisotropic sheet materials
Weibull distribution of selective laser melted AlSi10Mg parts for compression testing
Influence of variable cutting surface contact area on the components of cutting forces and accuracy
2020
Cilt: 1 - Sayı : 4
Improving the RF Performance of Ceramics Using Laser Assisted Machining
Development of a Software for Designing In-Hole Broaching Tools
Cilt: 1 - Sayı : 3
Surface Roughness of Aluminium Hybrid Metal Matrix Composites Affected by Tool Materials and Operating Conditions
Surface Integrity and Wear Resistance of Maraging Steel Produced by Additive Manufacturing Direct Metal Laser Sintering
Cilt: 1 - Sayı : 2
Influence of Lubricating on the Cutting Process in MQL Turning of Difficult-To-Cut Materials
Investigation of the Effects of EDM Parameters on Surface Roughness
Overview on Optimization Approaches for Resistance Spot Welding Parameters and Welded Joint Quality
Warpage Analysis of Injection Molded Thin-Walled Chassis Part by RSM and FEM
Cilt: 1 - Sayı : 1
Influence Structures of The Machine Tools on Roughness in Turning
Experimental, Mechanical Characterizations of Friction Welding of Steel and Aluminium Joints
Research of Treatment Process of Conical Holes by Diamond Honing
Analyzing Optimum Process Parameters in Laser Cutting of EN10025-2 Steel Plate
Investigation of Chip Breaker and Its Effect in Turning Operations
ISSN:
2717-7203
Başlangıç:
2020
Yayıncı:
Yıldız Teknik Üniversitesi
3.5b
790
Dergi Detay