___

• Ahmad, Z. (2006). Principles of corrosion engineering and corrosion control. Elsevier.
• Bandeira, R. M., Rêgo, G. C., Picone, C. A., van Drunen, J., Correr, W. R., et al. (2020). Alternating current oxidation of Ti–6Al–4V alloy in oxalic acid for corrosion-resistant surface finishing. SN Applied Sciences, 2(6), 1-14.
• Barril, S., Debaud, N., Mischler, S. & Landolt, D. (2002). A tribo-electrochemical apparatus for in vitro investigation of fretting–corrosion of metallic implant materials. Wear, 252(9-10), 744-754.
• Bidhendi, H.R.A. & Pouranvari, M. (2012). Corrosion study of metallic biomaterials in simulated body fluid. Metallurgical and Materials Engineering, 17(1), 13-22.
• Biesiekierski, A. Wang, J., Gepreel, M. A. H., & Wen, C. (2012). A new look at biomedical Ti-based shape memory alloys. Acta Biomaterialia, 8(5), 1661-1669.
• Burnat, B. Walkowiak-Przybyło, M., Błaszczyk, T., & Klimek, L. (2013). Corrosion behaviour of polished and sandblasted titanium alloys in PBS solution. Acta of Bioengineering and Biomechanics, 15(1), 87-95.
• Callister, W. D. & Rethwisch, D. G. (2007). Materials science and engineering: an introduction 7, 665-715. John Wiley & Sons, New York.
• Chatterjee, S. (2022). Titanate incorporated anodized coating on magnesium alloy for corrosion protection, antibacterial responses and osteogenic enhancement. Journal of Magnesium and Alloys, 10(4), 1109-1123.
• De Oliveira, L.A. & Antunes, R. A. (2018). Influence of the electrolyte composition on the corrosion behavior of anodized AZ31B magnesium alloy. Metals - Open Access Metallurgy Journal, 11(10), 1573.
• De Viteri, V.S. & Fuentes, E. (2013). Titanium and titanium alloys as biomaterials. Tribology-fundamentals and advancements, 5, 154-181.
• Estrada-Cabrera, E., Torres-Ferrer, L. R., Aztatzi-Aguilar, O. G., De Vizcaya-Ruiz, A., Meraz-Rios, M. A., et al. (2019). Chitosan-bioglass coatings on partially nanostructured anodized Ti-6Al-4V alloy for biomedical applications. Surface and Coatings Technology, 375, 468-476.
• Fattah-Alhosseini, A. & Joni, M. S. (2015). Effect of KOH Concentration on the Microstructure and Electrochemical Properties of MAO-Coated Mg Alloy AZ31B. Journal of Materials Engineering and Performance, 24(9), 3444-3452.
• Feng, A. & Han, Y. (2010). The microstructure, mechanical and corrosion properties of calcium polyphosphate reinforced ZK60A magnesium alloy composites. Journal of Alloys and Compounds, 504(2), 585-593.
• Ferreira, M. E., de Lourdes Pereira, M., e Costa, F. G., Sousa, J. P. & de Carvalho, G.S. (2003). Comparative study of metallic biomaterials toxicity: A histochemical and immunohistochemical demonstration in mouse spleen. Journal of Trace Elements in Medicine and Biology, 17(1), 45-49.
• Hermawan, H., Ramdan, D. & Djuansjah, J.R. (2011). Metals for biomedical applications. Biomedical engineering-from theory to applications, 1, 411-430.
• Hiromoto, S., Shishido, T., Yamamoto, A., Maruyama, N., Somekawa, H. & Mukai, T. (2008). Precipitation control of calcium phosphate on pure magnesium by anodization. Corrosion Science, 50(10), 2906-2913.
• Hsiao, H.Y. & Tsai, W.T. (2005). Characterization of anodic films formed on AZ91D magnesium alloy. Surface and Coatings Technology, 190(2-3), 299-308.
• Jones, D.A. (1996). Principles and prevention of corrosion prentice hall. Saddle River. New Jorsey.
• Karambakhsh, A., Afshar, A. & Malekinejad, P. (2012). Corrosion resistance and color properties of anodized Ti-6Al-4V. Journal of Materials Engineering and Performance, 21(1), 121-127.
• Khaselev, O. & Yahalom, J. (1998). The anodic behavior of binary Mg-Al alloys in KOH-aluminate solutions. Corrosion Science, 40(7), 1149-1160.
• Komotori, J., Hisamori, N. & Ohmori, Y. (2007). The corrosion/wear mechanisms of Ti–6Al–4V alloy for different scratching rates. Wear, 263(1-6), 412-418.
• Kumar, N., Langer, R. S. & Domb, A. J. (2002). Polyanhydrides: an overview. Advanced Drug Delivery Reviews, 54(7), 889-910.
• Leinenbach, C. & Eifler, D. (2006). Fatigue and cyclic deformation behaviour of surface-modified titanium alloys in simulated physiological media. Biomaterials, 27(8), 1200-1208.
• Li, L. L., Cheng, Y. L., Wang, H. M. & Zhang, Z. (2008). Anodization of AZ91 magnesium alloy in alkaline solution containing silicate and corrosion properties of anodized films. Transactions of Nonferrous Metals Society of China, 18(3), 722-727.
• Lim, S.G. & Choe, H. C. (2019). Bioactive apatite formation on PEO-treated Ti-6Al-4V alloy after 3rd anodic titanium oxidation. Applied Surface Science, 484, 365-373.
• Maradit-Kremers, H., Crowson, C. S., Larson, D., Jiranek, W. A. & Berry, D.J. (2014). Prevalence of total hip (THA) and total knee (TKA) arthroplasty in the United States. In Abstract presented at: AAOS Annual Meeting.
• Manivasagam, G., Dhinasekaran, D. & Rajamanickam, A. (2010). Biomedical implants: corrosion and its prevention-a review. Recent Patents on Corrosion Science. 2, 40-54
• McCord, C. P. (1942). Chemical gas gangrene from metallic magnesium. Indust Med, 11, 71-78.
• Mizutani, Y., Kim, S. J., Ichino, R. & Okido, M. (2003). Anodizing of Mg alloys in alkaline solutions. Surface and Coatings Technology, 169, 143-146.
• Marcus, P. (Ed.). (2011). Corrosion mechanisms in theory and practice. CRC press. Florida.
• Nasab, M. B., Hassan, M. R. & Sahari, B. B. (2010). Metallic biomaterials of knee and hip-a review. Trends Biomater. Artif. Organs, 24(1), 69-82.
• Narayanan, R. & Seshadri, S. K. (2007). Phosphoric acid anodization of Ti–6Al–4V–Structural and corrosion aspects. Corrosion Science, 49(2), 542-558.
• Nishinaka, K., Salman, S. A., Kuroda, K. & Okido, M. (2018). Characterization and Structure Analysis of the Anodic Film Formed on AZ31 Mg Alloy in KOH Alkaline Solution with Various Additives. In Key Engineering Materials, 786, 159-164.
• Okazaki, Y. (2002). Effect of friction on anodic polarization properties of metallic biomaterials. Biomaterials, 23(9), 2071-2077.
• Okazaki, Y. & Gotoh, E. (2002). Implant applications of highly corrosion-resistant Ti-15Zr-4Nb-4Ta alloy. Materials Transactions, 43(12), 2943-2948.
• Ono, S., Miyake, M. & Asoh, H. (2004). Effects of formation voltage and electrolyte ions concentration on the structure and passivity of anodic films on magnesium. Journal of Japan Institute of Light Metals, 54(11), 544-550.
• Park, I. S., Jang, Y. S., Kim, Y. K., Lee, M. H., Yoon, J. M. & Bae, T. S. (2008). Surface characteristics of AZ91D alloy anodized with various conditions. Surface and Interface Analysis: An International Journal devoted to the development and application of techniques for the analysis of Surfaces, Interfaces and Thin Films, 40(9), 1270-1277.
• Park, Y. J., Shin, K. H. & Song, H. J. (2007). Effects of anodizing conditions on bond strength of anodically oxidized film to titanium substrate. Applied Surface Science, 253(14), 6013-6018.
• Pietak, A., Mahoney, P., Dias, G. J. & Staiger, M. P. (2008). Bone-like matrix formation on magnesium and magnesium alloys. Journal of Materials Science: Materials in Medicine, 19(1), 407-415.
• Poinern, G. E. J., Brundavanam, S. & Fawcett, D. (2012). Biomedical magnesium alloys: A review of material properties, surface modifications and potential as a biodegradable orthopaedic implant. American Journal of Biomedical Engineering, 2(6), 218-240.
• Rivera-Denizard, O., Diffoot-Carlo, N., Navas, V. & Sundaram, P. A. (2008). Biocompatibility studies of human fetal osteoblast cells cultured on gamma titanium aluminide. Journal of Materials Science: Materials in Medicine, 19(1), 153-158.
• Razavi, M., Fathi, M. H. & Meratian, M. (2010). Microstructure, mechanical properties and bio-corrosion evaluation of biodegradable AZ91-FA nanocomposites for biomedical applications. Materials Science and Engineering, A, 527(26), 6938-6944.
• Reifenrath, J., Bormann, D. & Meyer-Lindenberg, A. (2011). Magnesium alloys as promising degradable implant materials in orthopaedic research. Magnesium alloys—corrosion and surface treatments, 94-108.
• Revie, R. W. (2008). Corrosion and corrosion control: An introduction to corrosion science and engineering. John Wiley & Sons. New York.
• Schutze, M. (2000). Corrosion and environmental degradation. Wiley-Vch. Weinheim.
• Shahba, R. A., Ghannem, W. A., El-Shenawy, A. E. S., Ahmed, A. S. & Tantawy, S. M. (2011). Corrosion and inhibition of Ti-6Al-4V alloy in NaCl solution. Int. J. Electrochem. Sci, 6(11), 5499-5509.
• Sul, Y. T., Johansson, C. B., Jeong, Y. & Albrektsson, T. (2001). The electrochemical oxide growth behaviour on titanium in acid and alkaline electrolytes. Medical Engineering & Physics, 23(5), 329-346.
• Tan, Y. M. & Revie, R. W. (2012). Heterogeneous electrode processes and localized corrosion 13. John Wiley & Sons. New York.
• Topcu, İ. (2020). Investigation of wear behavior of particle reinforced AL/B4C composites under different sintering conditions. Tehnički glasnik, 14(1), 7-14.
• Topcu, İ., Gulsoy, H. O. & Gulluoglu, A. N. (2019). Evaluation of Multi-Walled CNT particulate reinforced Ti6Al4V alloy based composites creep behavior of materials under static loads. Gazi University Journal of Science, 32(1), 286-298.
• Uchi, H., Kanno, T. & Alwitt, R. S. (2001). Structural features of crystalline anodic alumina films. Journal of the Electrochemical Society, 148(1), B17-B23.
• Üner, İ. & Koçak, E.D. (2012). Poli (laktik asit)’in kullanım alanları ve nano lif üretimdeki uygulamaları. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 11(22), 79-88.
• Warranty, Nobelbiocarecom, (2016). Retrieved April 21, 2016 from https://www.nobelbiocare.com/us/en/footer/warranty.html
• Wang, Y., Zhao, S., Li, G., Zhang, S., Zhao, R., Dong, A. & Zhang, R. (2020). Preparation and in vitro antibacterial properties of anodic coatings co-doped with Cu, Zn, and P on a Ti–6Al–4V alloy. Materials Chemistry and Physics, 241, 122360.
• Wen, C. E., Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y. & Asahina, T. (2001). Processing of biocompatible porous Ti and Mg. Scripta Materialia, 45(10), 1147-1153.
• Willert, H. G., Brobäck, L. G., Buchhorn, G. H., Jensen, P. H., Köster, G., Lang, I., Ochsner P. & Schenk, R. (1996). Crevice corrosion of cemented titanium alloy stems in total hip replacements. Clinical Orthopaedics and Related Research, 333, 51-75.
• Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R. & Feyerabend, F. (2008). Degradable biomaterials based on magnesium corrosion. Current Opinion in Solid State and Materials Science, 12(5-6), 63-72.
• Wu, S., Liu, X., Yeung, K. W., Guo, H., Li, P., Hu, T., Chung, C.Y. & Chu, P. K. (2013). Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants. Surface and Coatings Technology, 233, 13-26.
• Yerokhin, A. L., Nie, X., Leyland, A., Matthews, A. & Dowey, S. J. (1999). Plasma electrolysis for surface engineering. Surface and Coatings Technology, 122(2-3), 73-93.
• Yilmaz, E. B., Topcu, I. & Ceylan, M., (2020). Experimental investigation on mechanical properties of Multi Wall Carbon Nanotubes (MWCNT) reinforced aluminium metal matrix composites. Journal of Ceramic Processing Research, 21(5), 596-601.
• Yun, Y., Dong, Z., Lee, N., Liu, Y., Xue, D., Guo, X. & Sundaramurthy, S. (2009). Revolutionizing biodegradable metals. Materials Today, 12(10), 22-32.
• Zaffora, A., Di Franco, F., Virtù, D., Carfì Pavia, F., Ghersi, G., Virtanen, S. & Santamaria, M. (2021). Tuning of the Mg Alloy AZ31 Anodizing Process for Biodegradable Implants. ACS applied materials & interfaces, 13(11), 12866–12876.
• Zeng, R., Dietzel, W., Witte, F., Hort, N. & Blawert, C. (2008). Progress and challenge for magnesium alloys as biomaterials. Advanced Engineering Materials, 10(8), B3-B14.
• Zhang, E., Yin, D., Xu, L., Yang, L. & Yang, K. (2009). Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application. Materials Science and Engineering: C, 29(3), 987-993.