The Importance of Coupling between Thermal and Molar Fluxes in a Nitrogen-Oxygen Distillation Column
The Importance of Coupling between Thermal and Molar Fluxes in a Nitrogen-Oxygen Distillation Column
A model for the transfer of mass and thermal energy in a vapour-liquid region is used to investigate the influence of neglecting coupling on the transfer rates. As an example, we studied a nitrogen-oxygen distillation column. Using a combination of stage and point boundary conditions, a nitrogen transfer profile is obtained that shows the same trend as a profile based on an equilibrium stage distillation model. The distribution of the total transfer over the two column halves is not in agreement, however. This disagreement can be expected to decrease when the dependency of the vapour film thickness on the vapour flow rate and the vapour viscosity is included in the model. The effect of neglecting coupling on the calculated transfer rates changes along the length of the column. The total effect is considerable and should be taken into account in models for the transfer of mass and thermal energy through an interface.
___
- Bedeaux, D., & Kjelstrup, S. (2004). Irreversible thermody- namics - a tool to describe phase trasitions far from global equilibrium. Chemical Engineering Science, 59(1), 109– 118.
- De Koeijer, G. M., & Kjelstrup, S. (2004). Application of Irreversible Thermodynamics to Distillation. International Journal of Thermodynamics, 7(3), 107–114.
- Fonyó, Z. (1974a). Thermodynamic analysis of rectification II. Finite cascade models. International Chemical Engi- neering, 14, 203–210.
- Fonyó, Z. (1974b). Thermodynamic analysis of rectification I. Reversible model of rectification. International Chemi- cal Engineering, 14, 18–27.
- Kjelstrup, S., & Bedeaux, D. (2008). Non-equilibrium ther- modynamics of heterogeneous systems. Singapore: World Scientific Publishing Co.
- Kjelstrup, S., & De Koeijer, G. M. (2003). Transport equa- tions for distillation of ethanol and water from the entropy production rate. 1147–1161.
- Lemmon, E. W., Jacobsen, R. T., Penoncello, S. G., & Friend, D. G. (2000). Thermodynamic properties of air and mixtures of nitrogen, argon, and oxygen from 60 to 2000 K at pressures to 2000 MPa. Journal of Physical and Chemical Reference Data, 29(3), 331–385.
- Seader, J. D., & Henley, E. J. (1998). Separation process principles. New York, USA: John Wiley and Sons, Inc.
- Taylor, R., & Krishna, R. (1993). Multicomponent mass transfer. New York, USA: John Wiley and Sons, Inc.
- Van der Ham, L. V., Bock, R., & Kjelstrup, S. (2010). Mod- elling the coupled transfer of mass and thermal energy in the vapour-liquid region of a nitrogen-oxygen mixture. Chemical Engineering Science, 65(6), 2236–2248.