___

• [1] Eyuboglu AS, Ozcelik Y, Kulaksiz S, Engin IC. Statistical and microscopic investigation of disc segment wear related to sawing Ankara andesites. J. of Rock Mech. & Mining Sci., 2003, 40, 405–414.
• [2] German RM, Powder Metallurgy Science, 2nd ed., Princeton, New Jersey: Metal Powder Industries Federation; 1994.
• [3] Dos Santos SI, Balzaretti NM, Da Jornada JAH. Adhesion between CVD diamond and WC-Co induced by high-pressure and high-temperature. Dia. & Related Mater. 2006; 15:1457 – 1461.
• [4] Zhang, Y. Zhang, H.L. Wu, J.H. Enhanced thermal conductivity in copper matrix composites reinforced with titanium-coated diamond particles, Scripta Materialia, 2011, 65, 1097-1100.
• [5] Ünal, R., Effect of Cobalt to Bronze ratio on Transvers Rupture Strength of Diamond Segments, Materials Science Forum, 2007, 534-536, 1105-1108,
• [6] Konstanty, J., Tyrala, D. Wear mechanism of iron-base diamond- impregnated tool composites, Wear, 2013, 303, 533–540.
• [7] Ersoy. A,, Buyuksagic. S.,.Wear characteristics of circular diamond saws in the cutting of different hard abrasive rocks, Wear, 2005, 258, 1422–1436. [8] Şimsir M. and Öksüz, K. E., Effects of Sintering Temperature and Addition of Fe and B4C on Hardness and Wear Resistance of Diamond Reinforced Metal Matrix Composites, Journal of Superhard Materials, 2013,35, (6), 369–382.
• [9] Islak, S., Çelik, H., Effect of Sintering Temperature and Boron Carbide Content on the Wear Behavior of Hot Pressed Diamond Cutting Segments. Science Of Sintering, 2015, 47(2),131-143,.
• [10] Ucun I, Aslantas K, Büyüksagis İS, Tasgetiren S. An investigation on the effect of diamond concentration and matrix material composition in the circular sawing process of granites Proc. Inst. of Mech. Eng., Part C: J. Mech. Eng. Sci., 2010;1:1-11.
• [11] Boland JN, Li XS. Microstructural Characterization and Wear Behavior of Diamond Composite Materials. Materials, 2010; 3:1390-1419.
• [12] Ucun I, Aslantas K, Tasgetiren S, Buyuksagıs IS. Fracture path prediction of diamond segment in a marble cutting disc. Fatigue & Frac. of Eng. Mater. & Struct., 2008;31:517–525
• [13]Oliveira LJ, Bobrovnitchii GS, Filgueira M. Processing and characterization of impregnated diamond cutting tools using a ferrous metal matrix. Int. J. Refract. Met. Hard Mater. 2006;25(4):328–335.
• [14] Huadong D, Yawen L, Hongqi H, Zhihao J. Decreasing the sintering temperature of diamond-bit matrix material by the addition of the element. J. Mater. Process. Technol., 1998;74:52–55.
• [15] Hsieh YZ, Chen JF, Lin ST. Pressureless sintering of metal-bonded diamond particle composite blocks. J. Mater. Sci. 2000;35:5383 – 5387.
• [16] Hsieh YZ, Lin ST. Diamond tool bits with iron alloys as the binding matrices. Mater. Chem. and Phys. 2001;72:121–125.
• [17] Karagöz S, Zeren M. The Property optimization of diamond-cutting tools with the help of microstructural characterization. Int. J. Refract. Met. Hard Mater. 2001;19:23–26.
• [18] Dai QL, Luo CB, Xu XP, Wang YC. Effects of rare earth and sintering temperature on the transverse rupture strength of Fe-based diamond composites. J. Mater. Process. Technol. 2002;129:427-430.
• [19]Thorat RR, Brahmankar PK, Mohan TRR. Consolidation Behavior of Cu-Co-Fe Pre-Alloyed Powders. International Symposium of Research Students on Materials Science and Engineering, 20-22 December, 2004, Chennai, India p.1-6.
• [20] Chang R, Znag J, Wang Y, Lu J. Study of Ti-coated diamond grits prepared by spark plasma coating. Diamond and Related Materials, 2017; 77:72-78,
• [21] Unal R, Gurcay EA. Matrix composition effect on the wear behavior of diamond segments. Mater. Sci. Forum 2007;534–536:1113–1116.
• [22] Barbosa AP, Bobrovnitchii GS, Skury ALD, Guimarães RS, Filgueira M. Structure, microstructure and mechanical properties of PM Fe–Cu–Co alloys. Mater. & Des. 2010, 31:522–526.
• [23] Spriano S, Chen Q, Settineri L, Bugliosi S. Low content and free cobalt matrixes for diamond tools. Wear 2005;259:1190–1196.
• [24] Karagöz S, Zeren M. Sintering of polycrystalline diamond cutting tools. Mater. & Des. 2007;28:1055–1058.
• [25] Kaplan M., Budak, S. Bir Mermer Kesici Takımında Co Katkısının Mikroyapı ve Mekanik Özelliklere Etkisi, 6th International Advanced Technologies Symposium (IATS’11), 2011, 183-188.
• [26] Konstanty J. The materials science of stone sawing. Ind. Dia. Rev. 1991;1:27-31.
• [27] Selvi, E. Doğal taş kesmede kullanılan elmas takımların serbest sinterlenmesi ve karakterizasyonu. İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, (Yüksek Lisans Tezi),2013, 73 s, İstanbul.
• [28] Çelik. E. Elmaslı kesici takımlarda alternatif bağlayıcılar. Fırat Üniversitesi Fen Bilimleri Enstitüsü. (Doktora Tezi),2009, 93 s, Elazığ.
• [29] Hünder, E. Demir esaslı alaşımların bağlayıcı matris olarak kullanıldığı elmas kesici uçların karakterizasyonu, İTÜ Fen Bilimleri Enstitüsü, 2012, 81 s, İstanbul