___

• [1] Civalek, Ö., Demir, C., Buckling and bending analyses of cantilever carbon nanotubes using the euler-bernoulli beam theory based on non-local continuum model. Asian Journal of Civil Engineering, 12(5), 651-661, 2011.
• [2] Emsen, E., Mercan, K., Akgöz, B., Civalek, Ö., Modal analysis of tapered beam-column embedded in Winkler elastic foundation. International Journal of Engineering & Applied Sciences, 7(1), 1-11, 2015.
• [3] Demir, Ç., Akgöz, B., Erdinç, M.C., Mercan, K., Civalek, Ö., Elastik bir ortamdaki grafen tabakanın titreşim hesabı. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 32(2), 2017.
• [4] Demir, C., Mercan, K., Numanoglu, H.M., Civalek, O., Bending response of nanobeams resting on elastic foundation. Journal of Applied and Computational Mechanics, 4(2), 105-114, 2018.
• [5] Mercan, K., Civalek, Ö., Buckling analysis of silicon carbide nanotubes (SiCNTs). International Journal of Engineering & Applied Sciences, 8(2), 101-108, 2016.
• [6] Avcar, M., Effects of rotary inertia shear deformation and non-homogeneity on frequencies of beam. Structural Engineering and Mechanics, 55(4), 871-884, 2015.
• [7] Avcar, M., Effects of Material Non-Homogeneity and Two Parameter Elastic Foundation on Fundamental Frequency Parameters of Timoshenko Beams. Acta Physica Polonica A, 130(1), 375-378, 2016.
• [8] Avcar, M., Mohammed, W.K.M., Free vibration of functionally graded beams resting on Winkler-Pasternak foundation. Arabian Journal of Geosciences, 11(10), 2018.
• [9] Aktir, Y., Brunel, J.F., Dufrenoy, P., Mahe, H., Three-dimensional finite element model of an automotive clutch for analysis of axial vibrations. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 230(10), 1324-1337, 2016.
• [10] Kim, B., Finite Element Modeling and Parametric Study of an Automotive V-belt Pulley for Durability Improvement. International Journal of Precision Engineering and Manufacturing, 16(7), 1517-1524, 2015.
• [11] Kim, H.Y., Park, J.K., Lee, M.G., Phase transformation-based finite element modeling to predict strength and deformation of press-hardened tubular automotive part. International Journal of Advanced Manufacturing Technology, 70(9-12), 1787-1801, 2014.
• [12] Le Henaff, F., Azzopardi, S., Woirgard, E., Youssef, T., Bontemps, S., Joguet, J., Lifetime Evaluation of Nanoscale Silver Sintered Power Modules for Automotive Application Based on Experiments and Finite-Element Modeling. Ieee Transactions on Device and Materials Reliability, 15(3), 326-334, 2015.
• [13] Pisaturo, M., Senatore, A., Simulation of engagement control in automotive dry-clutch and temperature field analysis through finite element model. Applied Thermal Engineering, 93, 958-966, 2016.
• [14] Toros, S., Altinel, K., Contribution of functionally graded material modelling on finite element simulation of rod end parts in automotive steering system. Journal of Mechanical Science and Technology, 30(7), 3137-3141, 2016.
• [15] Wong, P.K., Xie, Z.C., Zhao, J., Xu, T., He, F., Analysis of automotive rolling lobe air spring under alternative factors with finite element model. Journal of Mechanical Science and Technology, 28(12), 5069-5081, 2014.
• [16] Civalek, Ö., Geometrically non-linear static and dynamic analysis of plates and shells resting on elastic foundation by the method of polynomial differential quadrature (PDQ). 2004, Elazig: Firat University.
• [17] Civalek, O., Finite Element analysis of plates and shells. 1998, Elazığ: Fırat University
• [18] Civalek, O., Demir, C., A simple mathematical model of microtubules surrounded by an elastic matrix by nonlocal finite element method. Applied Mathematics and Computation, 289, 335-352, 2016.
• [19] Jian, F.J., Jayas, D.S., Characterization of isotherms and thin-layer drying of red kidney beans, Part II: Three-dimensional finite element models to estimate transient mass and heat transfer coefficients and water diffusivity. Drying Technology, 36(14), 1707-1718, 2018.
• [20] Mu, L.Z., Shao, H.W., He, Y., Oda, T., Jia, X.M., Construction of Anatomically Accurate Finite Element Models of the Human Hand and a Rat Kidney. Journal of Mechanics in Medicine and Biology, 11(5), 1141-1164, 2011.
• [21] Snedeker, J.G., Bajka, M., Hug, J.M., Szekely, G., Niederer, P., The creation of a high-fidelity finite element model of the kidney for use in trauma research. Journal of Visualization and Computer Animation, 13(1), 53-64, 2002.
• [22] Yates, K.M., Untaroiu, C.D., Finite element modeling of the human kidney for probabilistic occupant models: Statistical shape analysis and mesh morphing. Journal of Biomechanics, 74, 50-56, 2018.
• [23] Das, A.K., Chatterjee, S., Finite element method-based modelling of flow rate and temperature distribution in an oil-filled disc-type winding transformer using COMSOL multiphysics. Iet Electric Power Applications, 11(4), 664-673, 2017.
• [24] AB, w.c.c.C., COMSOL Multiphysics®. 2018: Stockholm, Sweden.
• [25] Mercan, K., Civalek, O., Buckling analysis of Silicon carbide nanotubes (SiCNTs) with surface effect and nonlocal elasticity using the method of HDQ. Composites Part B-Engineering, 114, 35-45, 2017.
• [26] Mercan, K., Numanoglu, H.M., Akgoz, B., Demir, C., Civalek, O., Higher-order continuum theories for buckling response of silicon carbide nanowires (SiCNWs) on elastic matrix. Archive of Applied Mechanics, 87(11), 1797-1814, 2017.