Design Verification of Tractor Clutch Cover under High Centrifugal Effect
Design Verification of Tractor Clutch Cover under High Centrifugal Effect
Clutch components rotating at high speed remains under the influence of high centrifugal forces. Therefore; it should be known that the speed at which damage will begin. For this purpose, the burst test is performed. Besides this test by using finite element method, this test could be done in virtual environments. Thus, it is saving time and money. This paper presents an approach for validation process of tractor clutch cover. Firstly the real burst test setup is defined and the test conditions are described. Secondly developed finite element model which simulate the real test conditions is defined. As a result of the study, the tractor clutch cover stays durable at 6560 rpm. When it is compared real working conditions the safety factor of 3.5 is calculated for the clutch cover.
Keywords:
Burst Test, Centrifuge effect, Tractor Clutch Cover, Finite Element,
___
- 1 Abdullah, O.I., Schlattmann, J., Al-shabibi. ''A.M. Stresses and deformations analysis of a dry friction clutch system'', Tribology in Industry, 35,(2), 155-162, 2013.
- 2 Karpat, F., Dogan, O., Yuce, C., Kaya, N., Cengiz, G. ''The investigation of stress distribution on the tractor clutch finger mechanism by using finite element method'', Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, November 14-20, Montreal, Canada. doi:10.1115/IMECE2014-3923,2014.
- 3 Dogan, O., Karpat, F., Kaya, N., Yuce, C., Genc, M.O., Yavuz, N. ''Optimum design of tractor clutch PTO finger by using topology and shape optimization'', Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition IMECE2015 November 13-19, 2015, Houston, Texas, USA doi:10.1115/IMECE2015-52008,2015.
- 4 Dogan, O., Karpat, F., Yuce, C., Kaya, N., Yavuz, N., Sen, H. ''A novel design procedure for tractor clutch fingers by using optimization and response surface methods'', Journal of Mechanical Science and Technology, 30, (6), 2615-2625, 2016.
- 5 Özbakış M. ''Debriyaj sistemlerinde kullanılan diyafram yayların karakteristiğinin incelenmesi ve optimizasyonu'', M.Sc Thesis, Mechanical Engineering, Dokuz Eylül University, Turkey, 2008.
- 6 Li-jun, Z., Tao, L., Bao-Yu, S. ''Optimum design of automobile diaphragm spring clutch'', IEEE Vehicle Power and Propulsion Conference (VPPC), September 3-5, 2008, Harbin, China, 2008.
- 7 Purohit, R., Khitoliya, P., Koli, D.K. ''Design and finite element analysis of an automotive clutch assembly'', Procedia Materials Science, 6, 490 – 502, 2014.
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 2016
- Yayıncı: Otomotiv Mühendisleri Derneği
Sayıdaki Diğer Makaleler
Ahmet Uyumaz, Fatih AKSOY, Fahrettin BOZ, Emre Yılmaz
Murat CİNİVİZ, İlker ÖRS, Bahar SAYIN KUL
Design Verification of Tractor Clutch Cover under High Centrifugal Effect
Fatih Karpat, Oğuz Doğan, Celalettin Yüce, Mehmet Onur Genç
Experimental comparison of different injection timings in an HCCI engine fueled with n-heptane
Seyfi POLAT, H. Serdar YÜCESU, Kaushik KANNAN, Ahmet UYUMAZ, Hamit SOLMAZ, Mahdi SHAHBAKHTHİ