Erol Arcaklioğlu, Özer Can, Erkan Öztürk

Artificial neural network based determination of the performance and emissions of a Diesel engine using ethanol-diesel fuel blends

In this study, the performance and exhaust emission values in a four-stroke, four-cylinder turbocharged Diesel engine fueled with ethanol-diesel fuel blends (10% and 15% in volume) were investigated by using Artificial Neural Network (ANN) modeling. The actual data derived from engine test measurements was applied in model training, cross-validation, and testing. To train the network, fuel injection pressures, throttle positions, engine speed, and ethanol fuel blend ratios were used as input layer in the network. The outputs are the engine performance values (engine torque, power, brake mean effective pressure, and specific fuel consumption) and exhaust emissions (SO2, CO2, NOx, and smoke level (N%)) which were measured in the experiments.The back-propagation learning algorithm with three different variants, a single layer, and logistic sigmoid transfer function (log-sig) was used in the network. By using the weights of the network, formulations were given for each output. The network for test data yielded the R2 values of 0.999 and the mean % errors for test data are smaller than 3.5% for the performance and 8% for the emissions.

Keywords:

Artificial neural network Diesel engine performance, Ethanol-diesel fuel, Exhaust emissions,

PDF

___

[1] Can, Ö. Çelikten. İ and Usta, N. (2004). Effects of etha-nol addition on performance and emissions of a turbo-charged indirect injection Diesel engine running at dif-ferent injection pressures. Energy Conversion and Man-agement, 45, 2429-2440.
[2] Can, O. Celikten. İ and Usta. N. (2005). Effects of etha-nol blended diesel fuel on exhaust emissions From a Diesel engine, Journal of Pamukkale University Engi-neering College-Journal of Engineering Sciences, 3, 11, 325-334.
[3] Balat, M. and Balat, H. (2009) Recent trends in global production and utilization of bio-ethanol fuel, Applied Energy, 86, 11, 2273-2282.
[4] Jinlin, Han. Somers, L. M. T. Cracknell, R. Joedicke, A. Wardle, R. Mohan, R. V. R. (2009) Experimental inves-tigation of ethanol/diesel dual-fuel combustion in a heavy-duty diesel engine, Fuel, 275, 117867.
[5] Rakopoulos, C. D. Rakopoulos, D. C. Kosmadakis, G. M. Papagiannakis, R. G. (2019). Experimental compara-tive assessment of butanol or ethanol diesel-fuel extend-ers impact on combustion features, cyclic irregularity, and regulated emissions balance in heavy-duty diesel engine, Energy, 174, 1145-1157.
[6] Liu, H. Ma, G. Hu, B. Zheng, Z. Yao, M. (2018). Effects of port injection of hydrous ethanol on combustion and emission characteristics in dual-fuel reactivity controlled compression ignition (RCCI) mode, Energy, 145, 592-602.
[7] Torres-Jimenez, E. Jerma, M. S. Gregorc, A. Lisec, I. Dorado, M. P. Kegl, B. (2011). Physical and chemical properties of ethanol–diesel fuel blends, Fuel, 90, 2, 795-802.
[8] Singh, G. N. and Bharj, R. S. (2019). Study of physical-chemical properties for 2nd generation ethanol-blended diesel fuel in India, Sustainable Chemistry and Pharma-cy, 12, 100130.
[9] Kwanchareon, P. Luengnaruemitchai, A. Jai-In, S. (2007) Solubility of a diesel– biodiesel–ethanol blend, its fuel properties, and its emission characteristics from diesel engine. Fuel, 86, 7–8, 1053–61.
[10] Jin, C. Pang, X. Zhang, X. Wu, S. Ma, M. Xiang, Y. Ma, J. Ji, J. Wang, G. Liu, H. (2019). Effects of C3–C5 al-cohols on solubility of alcohols/diesel blends, Fuel, 236, 65-74.
[11] Lapuerta, M. Armas, O. García-Contreras, R. (2007). Stability of diesel–bioethanol blends for use in diesel engines. Fuel, 86, (10–11), 1351–1357.
[12] Reyes, Y. Aranda, D. A. G. Santander, L. A. M. Cavado, A. Belchior, C. R. P. (2009). Action principles of cosol-vent additives in ethanol diesel blends: stability studies. Energy Fuels, 23, 5, 2731–2735.
[13] Zhang. Bo, Weibiao, Fu.and Jingsong, Gong. (2006). Study of fuel consumption when introducing DME or ethanol into diesel engine, Fuel, 85, 778-782.
[14] Rahimi, H. Ghobadian, B. Yusaf, T. Najafi, G. Khata-mifar, M. (2009). Diesterol: An environment-friendly IC engine fuel, Renewable Energy, 34, 1, 335-342.
[15] Bang-Quan, H. Shi-Jin, S. Jian-Xin, W. and Hong, H. (2003). The effect of ethanol blended diesel fuels on emissions from a diesel engine, Atmospheric Environ-ment, 37, 4965-4971.
[16] Kumar, V. Singh, A. P. Agarwal, A. Kumar. (2020). Gaseous emissions (regulated and unregulated) and par-ticulate characteristics of a medium-duty CRDI transpor-tation diesel engine fueled with diesel-alcohol blends, Fuel, 278, 118269.
[17] Curran, H. J. Fisher, E. M. Glaude, P. A. Marinov, N. M. Pitz, W. J. Westbrook, C. K. Layton, D. W. Flynn, P. F. Durrett, R. P. Loye, A. O. Akinyemi, O. C. Dryer, F. L. (2001). Detailed Chemical Kinetic Modelling of Diesel Combustion with Oxygenated Fuels, SAE Technical Pa-per, (No.2001-01-0653).
[18] Kitamura, T, Ito, T. Senda, J. and Fujimoto. H, (2001). Extraction of The Suppression Effects of Oxygenated Fuels on Soot Formation Using a Detailed Chemical Ki-netic Model, JSAE Review, 22, 2, 139-145.
[19] Choi, C. Y. and Reitz, R. D. (1999). An Experimental Study on The Effects of Oxygenated Fuel Blends and Multiple Injection Strategies on DI Diesel Engine Emis-sions, Fuel, 78, 1303-1317.
[20] Kocis, D. Song, K. Lee, H. S. and Litzinger, T. (2000). Effects of Dimethoxymethane and Dimethylcarbonate on Soot Production in an Optically-accessible DI Diesel Engine, SAE Technical Paper, (No: 2000-01-2795).
[21] Flynn, P. F. Durrett, R. P. Hunter, G. L. Loye. Zu, Akinyemi, A. O. Dec, O. C. and Westbrook, C. K. (1999). Diesel Combustion: an Integrated View Combin-ing Laser Diagnostics, Chemical Kinetics and Empirical Validation. SAE Technical Paper, (No: 1999-01-05 09).
[22] Fischer, S. L. Dryer, F. L. and Curan, H. J. (2000). The Reaction Kinetics of Dimethyl Ether: High- Temperature Pyrolysis and Oxidation in Flow Reactors, International Journal of Chemical Kinetics, 32, 12, 713-740.
[23] Nabi, Md. N. (2010). Theoretical investigation of engine thermal efficiency, adiabatic flame temperature, NOx emission and combustion-related parameters for differ-ent oxygenated fuels, Applied Thermal Engineering, 30, 8–9, 839-844.
[24] Arcaklıoğlu, E. Çavuşoğlu, A. and Erişen, A. (2004). Thermodynamic analyses of refrigerant mixtures using artificial neural networks, Applied Energy, 78, 219-230.
[25] Sözen, A. and Arcaklıoğlu, E. (2005). Prediction of solar potential in Turkey, Applied Energy, 80, 35-45.
[26] Çelik, V. and Arcaklioğlu, E. (2005). Performance maps of a diesel engine, Applied Energy, 81, 3, 247-259.
[27] Polat, S. Solmaz, H. Calam, A. Yılmaz, E. (2020). Esti-mation of the COVIMEP Variation in a HCCI Engine. Politeknik Dergisi, 23, 3, 721-727.
[28] Işcan, B. (2020). ANN modeling for justification of thermodynamic analysis of experimental applications on combustion parameters of a diesel engine using diesel and safflower biodiesel fuels, Fuel, 279, 118391.
[29] Kurtgoz, Y. Karagoz, M. Deniz, E. (2017). Biogas en-gine performance estimation using ANN, Engineering Science and Technology, an International Journal, 20, 6, 1563-1570.
[30] Arcaklioğlu, E. and Çelikten, İ. (2005). Diesel engine's performance and exhaust emissions, Applied Energy, 80, 11-22.
[31] D.D. Massie: ECOS’01 on ‘Neural network fundamen-tals for scientists and engineers’, İstanbul, Turkey, July 2001, paper 123.

International Journal of Automotive Science and Technology-Cover

Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2016
Yayıncı: Otomotiv Mühendisleri Derneği

Arşiv