Puran Singh, Debashis Pramanik, Ran Vijay SİNGH, Mohit KUMAR JİGAYASU, Srijan VYAS, Aman PARDHAN, Saurabh Kumar GOYAL

Performance Analysis and Simulation of Diesel Engine on Variable Compression Ratio

A systematic study to determine the effect of varying the compression ratio on the performance of a diesel engine is carried out. In this paper the various performance parameters have been studied at various compression ratios and optimum value of compression ratio has been found. At this value the engine performs at its best efficiency and lowest fuel consumption. The entire study was carried out using a simulation software Diesel RK version 4.1.3.143. In order to find out the optimum compression ratio the simulation was carried out at the compression ratios ranging from 17:1- 21:1. The performance parameters considered for the simulation are Indicated mean effective pressure (IMEP), [1] Indicated Efficiency, Brake mean effective pressure (BMEP), Braking efficiency, Specific fuel consumption (SFC) and Exhaust gas temperature. The graphs for these parameters against the engine speed at different compression ratios are plotted. The results shows that engine works best at compression ratio 18.5 for the above stated parameters.

Keywords:

Diesel engine, Variable compression ratio, performance parameters,

PDF

___

. Singh Kirpal, “Testing Quantities of Engine”, in Automotive Engineering 12th ed, Standards Publications.
. Mathur ML and Sharma RP, “Performance Parameters”, in Internal Combustion Engine, Dhanpat Rai Publications: 2015.
.Crouse William H, Anglin Donald L, “” in Automotive Mechanics 10th ed., McGraw Hill Education (India) Private Limited.
. K.Satyanarayana, Vinodh Kumar Padala, T.V.Hanumantha Rao, S.V.Umamaheswararao “Variable Compression Ratio Diesel Engine Performance Analysis”,International Journal of Engineering Trends and Technology (IJETT) – Volume 28 Number 1 - October 2015.
. Mathur Y.B., Poonia M.P., Jethoo A.S., Singh R. “Optimization of Compression Ratio of Diesel Fuelled Variable Compression Ratio Engine”, International Journal of Energy Engineering (IJEE) -Volume 2, Issue 3-August 2012.
. Hiyoshi R., Tanaka Y., Takemura S., “Multi-link variable compression ratio engine”U.S. Patent 8087390 B2, issued October 22, 2008.
. Larsen G.J.,” Reciprocating piston engine with a varying compression ratio”U.S. Patent 5025757, issued September 13, 1990.
.Wallace, W. and Lux, F., "A Variable Compression Ratio Engine Development," SAE Technical Paper 640060, 1964, doi: 10.4271/640060.
.Roberts, M., "Benefits and Challenges of Variable Compression Ratio (VCR)," SAE Technical Paper 2003-01-0398, 2003, doi: 10.4271/2003-01-0398.
. Kleeberg, H., Tomazic, D., Dohmen, J., Wittek, K. et al., "Increasing Efficiency in Gasoline Powertrains with a Two-Stage Variable Compression Ratio (VCR) System," SAE Technical Paper 2013-01-0288, 2013, doi:10.4271/2013-01-0288.
. Kohler Groups, Engine specification work manual.