Position Control of a Ball & Beam Experimental Setup Based on Sliding Mode Controller

Öz In this paper, a sliding mode control (SMC) method is introduced to design a control methodology for the ball and beam experimental setup (BBS) that consists of a servo motor, beam and ball. The proposed control method is realized in two cascaded control structures such that primary and secondary, respectively. In the primary part, called outer loop, the position of the ball is controlled by changing the angle of the beam. In the secondary part, called inner loop, the needed voltage is generated to determine appropriate position angle of the servo motor to adjust the position of the beam. Furthermore, a well-tuned conventional PI controller is also applied to the system to indicate the priority and effectiveness of the SMC. The results obtained in real-time show that the SMC is better than the PI controller in the aspect of reference tracking, fast response to the changes and accuracy as well.

Anahtar Kelimeler:

Nonlinear control, sliding mode control, ball and beam system

PDF

___

P. V. M. Maalini, G. Prabhakar and S. Selvaperumal, “Modelling and Control of Ball and Beam System using PID Controller,” in Proc. of the Int. Conf. on Advanced Communication and Computing Technologies, 2016, pp. 322-326.

M. Ramirez-Neira, H. Sira-Ramirez, R. Garrido-Moctezuma and A. Luviano-Juarez, “Linear Robust Generalized Proportional Integral Control of a Ball and Beam System for Trajectory Tracking Tasks,” in Proc. of the American Control Conf., 2016, pp. 4719-4724.

W. Yuanyuan, L. Yongxin, “Fuzzy PID Controller Design and Implement in Ball-Beam System,” in Proc. of the 34th Chinese Control Conf., 2015, pp. 3613-3616.

S.-K. Oh, H.-J. Jang and W. Pedrycz, “The design of a fuzzy cascade controller for ball and beam system: A study in optimization with the use of parallel genetic algorithms,” Engineering Applications of Artificial Intelligence, vol. 22(2009), pp. 261-271, Oct. 2008.

P. Jain and M. J. Nigam, “Real Time Control of Ball and Beam System with Model Reference Adaptive Control Strategy using MIT Rule,” in Proc. of the IEEE Int. Conf. on Computational Intelligence and Computing Research, 2013, pp. 1-4.

Y.-H. Chang, C.-W. Chang, C.-W. Tao, H.-W. Lin and J.-S. Taur, “Fuzzy sliding-mode control for ball and beam system with fuzzy ant colony optimization,” vol. 39, no. 3, pp. 3624-3633, Feb. 2012.

M.-S. Koo, H.-L. Choi and J.-T. Lim, “Adaptive Nonlinear Control of A Ball and Beam System Using the Centrifugal Force Term,” International Journal of Innovative Computing, Information and Control, vol. 8, no. 9, pp. 5999-6009, Sep. 2012.

Quanser, Ball and Beam (BB01) user manual, 2011.

A. Başçi, A. Derdiyok, “The application of chattering-free sliding mode controller in coupled tank liquid-level control system”, Korean J. of Chem. Eng., vol. 30, no. 3, pp. 540-545, 2013

A. Sabanovic, K. Jezernik, K. Wada, “Chattering-free sliding modes in robotic manipulators control”, Robotica, vol. 14, no. 1, pp. 17-29, 1996.

K. Jezernik, B. Curk, J. Harnik, “Observer Based Sliding Mode Control of Robotic Manipulator”, Robotica, vol. 12, no. 5, pp. 443-448, 1994.

A. Derdiyok, M. Levent, “Sliding mode control of a bioreactor”, Korean J. Chem. Eng., vol. 17, no. 6, pp. 619-624, 2000.

International Journal of Applied Mathematics Electronics and Computers-Cover

ISSN: 2147-8228
Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2013
Yayıncı: Selçuk Üniversitesi

Arşiv