Development of An Inline Quality Measurement System For Tufting Process

Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2008
Yayıncı: Marmara Üniversitesi

Öz Missing carbon fibre reinforced plastic production facilities which are fully automated are hindering to the manufacture of large-scale CFRP-components. A two-stage procedure consisting of a preforming process and a resin transfer moulding process is recommended for the manufacturing of composites in large scales. Starting point of the preform process are usually flat textiles structures such as woven or multiaxial. After a precut process they further processed in a sequence of handling, forming, joining and edging to complex, near-net-shape textile preform. Afterwards the preform is consolidated via a resin transfer moulding process. Because the preforming process is only partly automatable, high costs arise.

Anahtar Kelimeler:

Tufting Process; seam defects; inline quality measurement

PDF

___

AVK - Industrievereinigung verstärkte Kunststoffe e.V.: Composites - Marktbericht: Marktentwicklungen, Herausforderungen und Chancen, 2010

Ehrenstein, G.W.:

Faserverbund-Kunststoffe.

Werkstoffe – Verarbeitung – Eigenschaften, 2. Aufl.

München, Wien: Carl Hanser Verlag, 2006

Frauenhofer, M.; Dilger, K.; Böhm, S.; Ströhlein, T.: Induction technique in manufacturing preforms, Mechanics of Composite Materials, Vol. 44, No. 5, 2008

Cetin M.; Klingele J.; Wellekötter J.; Samorey, T.; Gries T.: Innovative Use of Expanded Polystyrene (EPS) For Textile Preforming, 1st Joint Turkey-Japan Workshop on Polymeric Composite Materials, Sabancı University, Istanbul, Türkei, 2014

Cetin, M.; Hinck, T.; Pohlmann E.-M.; Gries, T.: Tufting process for preform fixation on foams for safe handling operations, XIII. International Izmir Textile and Apparel Symposium, Belek, Turkey, 2014.