Tek Fazlı Katı Oksit Yakıt Hücresi tabanlı Güç Sisteminin Modellenmesi, Tasarlanması ve Kontrolü

Endüstriyel bir enerji üretiminde, güç dönüşümü önemli bir ilgi konusudur. Güç akışı, güç dönüştürücü

Modelling, Design and Control of a Single Phase Solid Oxide Fuel Cell based Power System

In an industrial power generation, power conversion is a significantly important concern. The powerflow is seamless transmitted from fuel cell (FC) to electric grid through power converter components. This paperpresents modelling and simulation of grid connected FC system. One of the most important types of FCs is thatsolid oxide fuel cell (SOFC) which has high-temperature technology, and fuel-flexible economic entitlement hasbeen selected. The interconnection of the SOFC with a DC-DC converter and a DC-AC inverter for interfacingwith the electric grid are modelled and simulated. DC-DC Boost converter is controlled by current and voltagebased cascaded PI controller. Single phase adaptive filter based phase-locked loop (PLL) algorithm and pulsewidth modulation (PWM) is used for control of single phase DC-AC inverter. The simulation results show thatthe adaptive filter-PLL based control strategy is implemented for the control and synchronizing of the single phaseelectric grid connected SOFC system, successfully. All system components are developed by PSCAD/EMTDCsimulation software.

___

  • Akkinapragada N, 2007. Dynamic modelling and simulations of solid oxide fuel cells for grid-tied applications, Faculty of the Graduate School of The University of Missouri-Rolla, Master Thesis, 93p.
  • Boccaletti C, Duni G, Fabbri G, Santini E, 2006. Simulation models of fuel cell systems. 17th International Conference on Electrical Machines, July, Roma, Italy.
  • Chandrakar Y, 2013. Comparison of open loop and closed loop models for dual input DC-DC boost converter. International Journal of Emerging Technology and Advanced Engineering, 3: 307-311.
  • Jang M, Ciobotaru M, Agelidis VG. 2011. Grid-connected fuel cell system based on a boost-inverter with a battery back-up unit. Power Electronics and ECCE Asia (ICPE & ECCE), 30 May-3 June, Jeju, South Korea.
  • Jang M, Ciobotaru M, Agelidis VG, 2013. A single-phase grid-connected fuel cell system based on a boost-inverter. IEEE transactions on power electronics, 28: 279-288.
  • Meral ME, Cuma MU, Teke A, Tümay M, Bayındır KÇ, 2014. Experimental and simulation based study of an adaptive filter controlled solid state transfer switch. Electrical Engineering, 96: 385-395.
  • Meral, ME, Çelik, D, 2016. Grid Tied Fuel Cell System Using Single Phase PLL Based SOGI with PI and PR Current Controllers. Universal Journal of Electrical and Electronic Engineering, 4: 91-96.
  • Salam AA, Mohamed A, Hannan MA, 2009. Improved control strategy for fuel cell and photovoltaic inverter in a microgrid. Wseas Transactions on Power Systems, 4: 331-340.
  • Sharma RK, Mishra S, 2017. Dynamic power management and control of PV PEM fuel Cell based standalone AC/DC microgrid using hybrid energy storage. IEEE Transactions on Industry Applications, 1-12.
  • Shouman N, Hegazy Y, Sakr S. 2012. PSCAD Modeling and analysis of PEM fuel cell based distributed generators. Engineering and Technology (ICET), 10-11 October, Cairo, Egypt.
  • Tao Z, Bi L, Yan L, Sun W, Zhu Z, Peng R, Liu W, 2009. A novel single phase cathode material for a proton-conducting SOFC. Electrocemistry Communication, 11: 688-690.
  • Yang Y, Luo X, Dai C, Chen W, Liu Z, Li Q, 2014. Dynamic modeling and dynamic responses of grid-connected fuel cell. International Journal of Hydrogen Energy, 39: 14296-14305.
  • Zhao, W, Lu DDC, Agelidis VG, 2011. Current control of grid-connected boost inverter with zero steady-state error. IEEE Transactions on Power Electronics, 26: 2825-2834.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi-Cover
  • ISSN: 2146-0574
  • Yayın Aralığı: 4
  • Başlangıç: 2011
  • Yayıncı: -