FAULT TOLERANT CONTROL OF ROTOR SWING STABILIZER SYSTEM USING FMEA METHOD

In this article, rotor swing stabilizer system has been analyzed according to fault tolerant control FTC methodology. Fault tolerant control is presented in a general framework and Failure Mode and Effects Analysis FMEA is applied as a fault analysis method. The focus was on the category of requirements, process and components to find risky elements and provide solutions. The general methodology covered the failure mode and effect analysis and implementation of fault tolerant control systems on an overall level but still have a potential for improving immunity to component faults

Keywords:

Magnus effect, Failure mode and effect analysis, Fault tolerant control Stabilizer system,

PDF

___

[1] Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. “Diagnosis and Fault-Tolerant Control”, Springer-Verlag Berlin Heidelberg, 2 nd Edition, 2006.
[2] Blanke, M., Staroswiecki, M., & Wu, N. E. Concepts and methods in fault-tolerant control. American Control Conference, 2001; 2606–2620.
[3] “RotorSwing 140”, http://www.dmsholland.com/wp-content/uploads/2013/05/BrochureRotorSwing_ENG.pdf
[4] “FluidsLecture 16 Notes”, http://web.mit.edu/16.unified/www/FALL/fluids/Lectures/f16.pdf
[5] Rotorswing. (2013). The world’s first electrical Magnus effect yacht stabilizer system [Brochure]. Retrieved from http://www.dmsholland.com/wp-content/uploads/2013/09/LeafletRotorSwing_English.pdf
[6]“ML200-AS Rotor Stabilizer Hull Unit”, http://www.quantumhydraulic.com/specs/Quantum MagliftML200-AS.pdf
[7] Carlson, C.S. “Understanding and Applying the Fundamentals of FMEAs”. Annual Reliability and Maintainability Symposium, 2014.
[8] Stamasis, D.H., “Failure Mode and Effect Analysis: FMEA from Theory to Execution”. 2nd Edition, 2003.
[9] “RotorSwing boat stabilisers tested on Linssen sea trial”, http://www.mby.com/gear/ rotorswing-boat-stabilisers-tested-linssen-trial-49081
[10] Öztürk, D., Akyıldız H. (2016). Fault Tolerant Control of Rotor Swing Stabilizer. Unpublished master’s thesis, Istanbul Technical University, Istanbul, Turkey

Başlangıç: 2015
Yayıncı: İstanbul Teknik Üniversitesi

Arşiv

Sayıdaki Diğer Makaleler

INTERCEPTOR DESIGN AND CONTROL FOR THE HIGH SPEED CRAFT

Ataol TUNÇER, Gökhan Tansel TAYYAR, Yalçın ÜNSAN

GEMİLER İÇİN YALPA SÖNÜMLEYİCİ SİSTEMLER

Alper ZİHNİOĞLU, Yalçın ÜNSAN

FAULT TOLERANT CONTROL OF ROTOR SWING STABILIZER SYSTEM USING FMEA METHOD

Deniz ÖZTÜRK

ATA NUTKU MODEL DENEY TANKI ÇEKME DENEYLERİ İÇİN MODEL İMALAT SÜRECİ

Devrim Bülent DANIŞMAN