Burcu CICEK, Necmettin SAHIN, Mahmut ALKAN

Thermal Analysis of Chip on Board Packaging of High Power Led’s with Heat Pipe Using Cfd for Street Lights

In this study, in order to provide heat dissipation of the high power LEDs to be used for street illumination, U-shaped cylindrical copper heat pipes are used. Thermal analysis of this system was carried out numerically in the ANSYS Fluent software. Firstly, thermal analysis was performed for different numbers, diameters and lengths of heat pipes and optimum values were obtained. Afterwards, the optimum materials to be used as components of LED packages were determined. In addition, the effect of the power applied to the LED chip and of ambient temperature on the temperature distribution of the whole system was examined.

Keywords:

High Power LED's CFD, Heat Pipe, Thermal analysis,

PDF

___

URL: https://www.iup.edu/energymanagement/howto/led-lighting-benefits/, 10 February (2018).
M. Arik, J. Prtroski, S. Weaver, Thermal challenges in the future generation solid state lighting applications: light emitting diodes, in: Proceedings of the ASME/1EEE International Packaging Technical Conference, Hawaii, (2001).
Y. Gu, N. Narendran, A non-contact method for determining junction tempera- ture of phosphor-convened white LEDs, Proc. SPIE 5187 (2004) 107–114.
J.Z. Hu, L.Q. Yang, M.W. Shin, Mechanism and thermal effect of delamination in light-emitting diode packages, Microelectron. J. 38 (2) (2007) 157–163.
Wang, J. C., Huang, H. S. ve Chen, S. L., 2007. Experimental investigations of thermal resistance of a heat sink with horizontal embedded heat pipes. International Communications in Heatand Mass Transfer, 34(8), 958-970.
Shen, S.C., Huang, H.J., Shaw, H.J., 2013, Design and Estimation of a MCPCB-Flat Plate Heat Pipe for LED Array Module, Proceedings of 2013 IEEE International Conference on Mechatronics and Automation August 4 - 7, Takamatsu, Japan.
Tang, Y., Ding, X., Li, Z., Li, B., 2014, A highpower LED device with chips directly mounted on heat pipes, Applied Thermal Engineering 66- 632-639.
Moon, S. H., Park, Y. W., Yang, H. M. (2016). A single unit cooling fins aluminum flat heat pipe for 100W socket type COB LED lamp. Applied Thermal Engineering.
Wang, M., Tao, H., Sun, Z., Zhang, C.,2017, The development and performance of the high power LED radiator. International Journal of Thermal Sciences, 113, 65-72.