___

• Internet: USA, In Indiana University of Pennsylvania. https://www.iup.edu/energymanagement/howto/led-lighting-benefits.html , (2018).
• Arik, M., Prtroski, J., Weaver, S., “Thermal challenges in the future generation solid state lighting applications: light emitting diodes”, International Packaging Technical Conference, Hawaii, 113- 120, (2002).
• Gu, Y., Narendran, N., “A non-contact method for determining junction temperature of phosphorconvened white LEDs”, Third international conference on solid state lighting, San Diego, 5187: 107–114, (2004).
• Hu, J.S., Yang, L.Q., Shin, M.W., “Mechanism and thermal effect of delamination in lightemitting diode packages”, Microelectronics Journal, 38(2): 157–163, (2007).
• Wang, J.C., Huang, H.S., Chen, S.L., “Experimental investigations of thermal resistance of a heat sink with horizontal embedded heat pipes”, International Communications in Heat and Mass Transfer, 34(8): 958-970, (2007).
• Shen, S.C., Huang, H.J., Shaw, H.J., “Design and estimation of a MCPCB-flat plate heat pipe for LED array module”, International Conference on Mechatronics and Automation, Takamatsu, 158-163, (2013).
• Tang, Y., Ding, X., Li, Z., Li, B., “A high power LED device with chips directly mounted on heat pipes”, Applied Thermal Engineering, 66: 632-639, (2014).
• Moon, S.H., Park, Y.W., Yang, H.M., “A single unit cooling fins aluminum flat heat pipe for 100W socket type COB LED lamp”, Applied Thermal Engineering, 126: 1164-1169, (2016).
• Wang, M., Tao, H., Sun, Z., Zhang, C., “The development and performance of the high power LED radiator”, International Journal of Thermal Sciences, 113: 65-72, (2017).
• Carbajal, G., Sobhan, C.B., Queheillalt, D. T., Wadley, H. N., “A quasi-3D analysis of the thermal performance of a flat heat pipe”, International Journal of Heat and Mass Transfer, 50: (21-22), 4286-4296, (2007).
• Naveenkumar, Ch., Vijay Kumar P., Dilip Kumar D., “Simulation and CFD analysis of heat pipe with different wick geometry using CFX”, International Journal of Thermal Technologies, 5(3): 210-213, (2015).
• Annamalai, S.A., Ramalingam, V., “Experimental investigation and CFD analysis of an air cooled condenser heat pipe”, Thermal Science, 15(3): 759-772, (2011).
• Suresh, Z.V., Bhramara, B., “CFD Analysis of single turn pulsating heat pipe”, International Journal of Scientific & Engineering Research, 7(6): 238-244, (2016).
• Asmaie, L., Haghshenasfard, M., Mehrabani-Zeinabad, A., Esfahany, M.N., “Thermal performance analysis of nanofluids in a thermosyphon heat pipe using CFD modeling”, Heat and Mass Transfer, 49(5): 667-678, (2013).
• Ashish R., Chaudhari, Bhosale S.Y., “CFD validation and experimental investigation of circular heat pipe using hybrid nanofluid”, International Journal of Innovative Research in Science, Engineering and Technology, 5(9): 16058-16064, (2016).
• Lin, Z., Wang, S., Shirakashi, R., Zhang, L.W., “Simulation of a miniature oscillating heat pipe in bottom heating mode using CFD with unsteady modeling”, International Journal of Heat and Mass Transfer, 57(2): 642-656, (2013).
• Wang, J., Ma, H., Zhu, Q., “Effects of the evaporator and condenser length on the performance of pulsating heat pipes”, Applied Thermal Engineering, 91: 1018-1025, (2015).
• Dev, K., Budania, B., “Simulation and modeling of heat pipe”, International Journal of Technical Research, 5(1), (2016).
• Elnaggar, M.H., Abdullah, M.Z., Mujeebu, M.A., “Experimental analysis and FEM simulation of finned U-shape multi heat pipe for desktop PC cooling”, Energy Conversion and Management, 52(8-9): 2937-2944, (2011).