___

• Chung D.D.L., 7 - Carbon-Matrix Composites, Carbon Composites, Editör: Chung D.D.L., Butterworth-Heinemann, 387-466, 2017.
• Wang G., Li J., Lv K., Zhang W., Ding X., Yang G., Liu X, Jiang X., Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration, Sci. Rep., 6 (1), 1-13, 2016.
• Yang C., Cui S., Wu Z., Zhu J., Huang J., Ma Z., Fu R.K.Y., Tian X., Chu P.K., Wu, Z, High efficient co-doping in plasma electrolytic oxidation to obtain long-term self-lubrication on Ti6Al4V, Tribol. Int., 160, 107018, 2021.
• Tao X., Yao Z., Luo X., Comparison of tribological and corrosion behaviors of Cp Ti coated with the TiO2/graphite coating and nitrided TiO2/graphite coating, J. Alloys Compd., 718, 126-133, 2017.
• Zhang L.C., Chen L.Y., Wang L, Surface modification of titanium and titanium alloys: technologies, developments, and future interests, Adv. Eng. Mater., 22 (5), 1901258, 2020.
• Torres Y., Sarria P., Gotor F.J., Gutiérrez E., Peon E., Beltrán A.M., González J.E., Surface modification of Ti-6Al-4V alloys manufactured by selective laser melting: Microstructural and tribo-mechanical characterization, Surf. Coatings Technol., 348, 31-40, 2018.
• Probst J., Gbureck U., Thull R, Binary nitride and oxynitride PVD coatings on titanium for biomedical applications, Surf. Coatings Technol., 148 (2-3), 226-233, 2001.
• Fazel M., Salimijazi H.R., Shamanian M., Improvement of corrosion and tribocorrosion behavior of pure titanium by subzero anodic spark oxidation, ACS applied materials & interfaces, 10 (17), 15281-15287, 2018.
• Guleryuz H., Cimenoglu H., Surface modification of a Ti–6Al–4V alloy by thermal oxidation, Surf. Coatings Technol., 192 (2-3), 164-170, 2005.
• Patel P., Jamnapara N.I., Zala A., Kahar S.D., Investigation of hot-dip aluminized Ti6Al4V alloy processed by different thermal treatments in an oxidizing atmosphere, Surf. Coatings Technol., 385, 125323, 2020.
• Yürektürk Y., Baydoğan M., Characterization of ferritic ductile iron subjected to successive aluminizing and austempering, Surf. Coatings Technol., 347, 142–149, 2018.
• Awan G.H., Ul Hasan F., The morphology of coating/substrate interface in hot-dip-aluminized steels, Mater. Sci. Eng. A. 472, 157–165, 2008.
• Ei-Mahallawy N.A., Taha M.A., Shady M.A., Ei-Sissi A.R., Attia A.N., Reif W., Analysis of coating layer formedon steel strips during aluminising by hot dipping in Al-Si baths, Mater. Sci. Technol., 13, 832–840, 1997.
• Jeng S.-C., Oxidation behavior and microstructural evolution of hot-dipped aluminum coating on Ti-6Al- 4V alloy at 800 C, Surf. Coatings Technol., 235, 867–874, 2013.
• Zhang Z.G., Peng Y.P., Mao Y.L., Pang C.J., Lu L.Y., Effect of hot-dip aluminizing on the oxidation resistance of Ti–6Al–4V alloy at high temperatures, Corros. Sci., 55, 187–193, 2012.
• Deqing W., Ziyuan S., Yingli T., Microstructure and oxidation of hot-dip aluminized titanium at high temperature, Appl. Surf. Sci., 250, 238–246, 2005.
• Zhang Q.Y., Zhou Y., Liu J.Q., Chen K.M., Mo J.G., Cui X.H., S.Q. Wang, Comparative research on dry sliding wear of hot-dip aluminized and uncoated AISI H13 steel, Wear., 344, 22–31, 2015.
• Jiang W., Zhang B., Chen W., Wang S., Cui X., Dry Sliding Wear Behavior of Hot-Dip Aluminized Ti-6Al-4V Alloy as a Function of Sliding Velocity, J. Mater. Eng. Perform., 27, 5450–5459, 2018.
• Li X.T., Huang L.J., Wei S.L., An Q., Cui X.P., Geng L., Cycle oxidation behavior and anti-oxidation mechanism of hot-dipped aluminum coating on TiBw/Ti6Al4V composites with network microstructure, Sci. Rep., 8, 1–11, 2018.
• Wang Y., Xiong J., Yan J., Fan H., Wang J., Oxidation resistance and corrosion behavior of hot-dip aluminized coatings on commercial-purity titanium, Surf. Coatings Technol., 206, 1277–1282, 2011.
• Sitek R., Kaminski J., Borysiuk J., Matysiak H., Kubiak K., Kurzydlowski K.J., Microstructure and properties of titanium aluminides on Ti6Al4V titanium alloy produced by chemical vapor deposition method, Intermetallics., 36, 36–44, 2013.
• Rastkar A.R., Parseh P., Darvishnia N., Hadavi S.M.M., Microstructural evolution and hardness of TiAl3 and TiAl2 phases on Ti–45Al–2Nb–2Mn–1B by plasma pack aluminizing, Appl. Surf. Sci., 276, 112–119, 2013.
• Klimova-Korsmik O.G., Turichin G.A., Shalnova S.A., Gushchina M.O., Cheverikin V.V., Structure and properties of Ti-6Al-4V titanium alloy products obtained by direct laser deposition and subsequent heat treatment, in: J. Phys. Conf. Ser., IOP Publishing, 12061, 2018.
• Liu J.-P., Luo L.-S., Su Y.-Q.,. Xu Y.-J, Li X.-Z., Chen R.-R., Guo J.-J., Fu H.-Z., Numerical simulation of intermediate phase growth in Ti/Al alternate foils, Trans. Nonferrous Met. Soc. China., 21, 598–603, 2011.
• Sujata M., Bhargava S., Sangal S., On the formation of TiAl 3 during reaction between solid Ti and liquid Al, J. Mater. Sci. Lett., 16, 1175–1178, 1997.
• Zhao Y.G., Zhou W., Qin Q.D., Liang Y.H., Jiang Q.C., Effect of pre-oxidation on the properties of aluminide coating layers formed on Ti alloys, J. Alloys Compd., 391, 136–140, 2005.
• Li J., Lu Y., Zhang H., Xin L., Effect of grain size and hardness on fretting wear behavior of Inconel 600 alloys, Tribol. Int., 81, 215–222, 2015.
• Wang P., Hirose M., Suzuki Y., Adachi K., Carbon tribo-layer for super-low friction of amorphous carbon nitride coatings in inert gas environments, Surf. Coatings Technol., 221, 163–172, 2013.
• Suh N.P., The delamination theory of wear, Wear., 25, 111–124, 1973.
• Kakaš D., Škorić B., Mitrović S., Babić M., Terek P., Miletić A., Vilotić M., Influence of load and sliding speed on friction coefficient of IBAD deposited TiN, Tribol. Ind., 31, 3–10, 2009.