___

• Litvin, F.L., Gear Geometry and Applied Theory, Prentice Hall, New Jersey, A.B.D., 1994.
• Tsay, C.-B., “Helical Gears with Involute Shaped Teeth: Geometry, Computer Simulation, Tooth Contact Analysis and Stress Analysis”, Journal of Mechanical Design, Vol 110, No 4, 482–491, 1988.
• Chang, S.-L. ve Tsay C.-B., “Computerized Tooth Profile Generation and Undercut Analysis of Noncircular Gears Manufactured with Shaper Cutters”, Journal of Mechanical Design, Cilt 120, No 1, 92-99, 1998.
• Liu, C.C. ve Tsay, C.-B., “Tooth Undercutting of Beveloid Gears”, Journal of Mechanical Design, Cilt 123, No 4, 569–576, 2001.
• Figliolini, G. ve Angeles, J., “The Synthesis of Elliptical Gears Generated by Shaper-Cutters”, Journal of Mechanical Design, Cilt 125, No 4, 793-801, 2003.
• Brauer, J., “A General Finite Element Model of Involute Gears”, Finite Elements in Analysis and Design, Cilt 40, No 13-14, 1857-1872, 2004.
• Chen, C.-F. ve Tsay, C.-B., “Tooth Profile Design for the Manufacture of Helical Gear Sets with Small Numbers of Teeth”, International Journal of Machine Tools and Manufacture, Cilt 45, No 12-13, 1531-1541, 2005.
• Yang, S.-C., “Mathematical Model of a Helical Gear With Asymmetric Involute Teeth and Its Analysis”, International Journal of Advanced Manufacturing Technology, Cilt 26, No 5-6, 448-456, 2005.
• Yang, S.-C., “Study on an Internal Gear with Asymmetric Involute Teeth”, Mechanism and Machine Theory, Cilt 42, No 8, 977-994, 2006.
• Wu, S.-Z. ve Tsai, S.-J., “Contact Stress Analysis of Skew Conical Involute Gear Drives in Approximate Line Contact”, Mechanism and Machine Theory, Cilt 44, No 9, 1658-1676, 2009.
• Fetvacı, C., “Computer Simulation of Helical Gears with Asymmetric Involute Teeth”, Journal of The Faculty of Engineering and Architecture of Gazi University, Cilt 25, No 3, 441-447, 2010.
• Chen, W.-L. ve Tsay, C.-B., “Mathematical Model and Tooth Surfaces of Recess Action Wormgears with Double-depth Teeth”, Mechanism and Machine Theory, Vol. 46, No 12, 1840-1853, 2011.
• Tsay, M.-F. ve Fong, Z.-H., “Novel Profile Modification Methodology for Moulded Face-gear Drives”, Journal of Mechanical Engineering Science, Cilt 221, No 6, 715-725, 2007.
• Chen, Y.-C. ve Tsay, C.-B., “Stress Analysis of a Helical Gear Set with Localized Bearing Contact”, Finite Elements in Analysis and Design, Cilt 38, No 8, 707-723, 2002.
• Kuang, J.-H. ve Chen, W.-L., “Determination of Tip Parameters for the Protuberance Preshaving Cutters”, Mechanism and Machine Theory, Cilt 31, No 7, 839-849, 1996.
• Tsay, C.-B., Liu,W.-Y. ve Chen, Y.-C., “Spur Gear Generation by Shaper Cutters”, Journal of Materials Processing Technology, Cilt 104, No 3, 271-279, 2000.
• Huang, K. J. ve Su, H. W., “Approaches to Parametric Element Constructions and Dynamic Analyses of Spur/helical Gears Including Modifications and Undercutting”, Finite Elements in Analysis and Design, Cilt 46, No 12, 1106-1113, 2010.
• Deng, X., Hua, L., ve Han, X.,“Research on the Design and Modification of Asymmetric Spur Gear”, Mathematical Problems in Engineering, Cilt 2015, 2015, doi:10.1155/2015/897257, 2015.
• Jelaska, D. T., Gears and Gear Drives, John Wiley & Sons, West Sussex, UK, 2012.
• Çakmak, S., Dişli Çarklar : Geometri-Mukavemet-Teknoloji, İstanbul, 1980.
• Fetvacı, C., “Definition of Involute Spur Gear Profiles Generated By Gear-Type Shaper Cutters”, Mechanics Based Design of Structures and Machines, Cilt 38, No 4, 481-492, 2010.
• Fetvaci, C., “Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters”, Strojniski vestnik-Journal of Mechanical Engineering, Cilt 56, No 10, 644-652, 2010.
• Fetvacı, C., “Yuvarlanma Metodu ile İmal Edilen Asimetrik Evolvent Düz Dişlilerin Bilgisayar Simülasyonu”, Mühendis ve Makine, Cilt 52, No 516 , 60-69, 2011.
• Colbourne, J.R., The Geometry of Involute Gears, Springer-Verlag, New Jersey, A.B.D., 1987.