___

• Calkins, M., “Materials for sustainable sites”, John
• Wiley & Sons Inc., Hoboken, New Jersey, 14-24,
• -
• Inderwildi, O. R. and King, D. A., “Quo vadis
• biofuels?”, Energy & Environmental Science, 2
• (4): 343-346 ,2009.
• Kantarelis, E. and Zabaniotou, A., “Valorization of
• cotton stalks by fast pyrolysis and fixed bed air
• gasification for syngas production as precursor of
• second generation biofuels and sustainable
• agriculture”, Bioresource Technology, 100 (2):
• -947, 2009.
• Qi, W. Y, Hu, C. W., Li, G. Y., Guo, L. H., Yang,
• Y., Luo, J., Miao, X. and Du, Y., “Catalytic
• pyrolysis of several kinds of bamboos over zeolite
• NaY”, Green Chemistry, 8 (2): 183-190, 2006.
• Wang, C., Du, Z., Pan, J., Li, J. and Yang, Z.,
• “Direct conversion of biomass to bio-petroleum at low temperature”, Journal of Analytical and
• Applied Pyrolysis, 78 (2): 438-444, 2007.
• Tsai, W. T., Lee, M. K. and Chang, Y. M., “Fast
• pyrolysis of rice husk: Product yields and
• compositions”, Bioresource Technology, 98 (1):
• -28, 2007.
• Basu, P., “Biomass gasification and pyrolysis
• practical design and theory”, Academic Press is an
• imprint of Elsevier, USA, 75-78, 2010.
• Nilsen, M. H., Antonakou, E., Bouzga, A.,
• Lappas, A., Mathisen, K. and Stöcker, M.,
• “Investigation of the effect of metal sites in Me-Al-
• MCM-41 (Me=Fe, Cu or Zn) on the catalytic
• behavior during the pyrolysis of wooden based
• biomass”, Microporous and Mesoporous
• Materials, 105 (1-2): 189-203, 2007.
• Nakai, T., Kartal, S. N., Hata, T. and Imamura, Y.,
• “Chemical characterization of pyrolysis liquids of
• wood-based composites and evaluation of their
• bio-efficiency”, Building and Environment, 42
• (3): 1236-1241, 2007.
• Şensöz, S., Angın, D. ve Demiral, İ., “Kızılçam
• odun kabuğunun pirolizi ve ürünlerinin
• incelenmesi”, Yenilebilir Enerji Kaynakları
• Sempozyumu, İzmir, 147-151, 2001.
• Gerçel, H. F., “Bio-oil production from
• Onopordum acanthium L. by slow pyrolysis”,
• Journal of Analytical and Applied Pyrolysis, 92
• (1): 233-238, 2011.
• Heo, S. H., Park, H. J., Park, Y.-K., Ryu, C., Suh,
• D. J., Suh, Y.-W., Yim, J.-H. and Kim, S.-S.,
• “Bio-oil production from fast pyrolysis of waste
• furniture sawdust in a fluidized bed”,
• Bioresource Technology, 101 (1): 91-96, 2010.
• American Society for Testing and Materials,
• “Standard test method for direct moisture content
• measurement of wood and wood-base materials”,
• ASTM Standards D 4442-92, Easton, M. D.,
• USA, 1997.
• American Society for Testing and Materials,
• “Standard test method for volatile matter in
• analysis sample refuse derived fuel”, ASTM
• Standards E-897-88, Easton, M. D., USA, 2004.
• American Society for Testing and Materials,
• “Standard test method for ash in wood”, ASTM
• Standards D-1102-84, Easton, M. D., USA,
• -
• Rowell, R. M., Pettersen, R., Han, J. S., Rowell, J.
• S. and Tshabalala, M. A., “Handbook of wood
• chemistry and wood composites”, CRC Press,
• , 2005.
• Wise, L. E. and John, E. C., “Wood chemistry”,
• Reinhold Publication Co, New York, U.S.A., 1-
• : 1330, 1952.
• Technical Association of the Pulp and Paper
• Industry, “Acid-insoluble lignin in wood and
• pulp”, TAPPI T 222 om-02, Tappi Pres, Atlanta,
• GA, U.S.A., 2002.
• Technical Association of the Pulp and Paper
• Industry, “Solvent extractives of wood and pulp”, TAPPI T 204 cm-97, Tappi Pres, Atlanta, GA,
• USA, 1997.
• Wang, Z., Cao, J. and Wang, J., “Pyrolytic
• characteristics of pine wood in a slowly heating
• and gas sweeping fixed-bed reactor”, Journal of
• Analytical and Applied Pyrolysis, 84 (2): 179-
• , 2009.
• Fagbemi, L., Khezami, L. and Capart, R.,
• “Pyrolysis products from different biomasses:
• Application to the thermal cracking of tar”,
• Applied Energy, 69 (4): 293-306, 2001.
• Liaw, S.-S., Wang, Z., Ndegwa, P., Frear, C., Ha,
• S., Li, C.-Z. and Garcia-Perez, M., “Effect of
• pyrolysis temperature on the yield and properties
• of bio-oils obtained from the auger pyrolysis of
• Douglas Fir Wood”, Journal of Analytical and
• Applied Pyrolysis, 93: 52-62, 2012.
• Erşen, T. ve Pehlivan, D., “Yüksek yoğunluklu
• polietilen–odun karışımlarının birlikte pirolizi”, J.
• Fac. Eng. Arch. Gazi Univ., 26, (3): 607-612,
• -
• Aho, A., Kumar, N., Eränen, K., Salmi, T., Hupa,
• M. and Murzin, D. Y., “Catalytic pyrolysis of
• woody biomass in a fluidized bed reactor:
• Influence of the zeolite structure”, Fuel, 87 (12):
• -2501, 2008.
• Zhong, C. and Wei, X., “A comparative
• experimental study on the liquefaction of wood”,
• Energy, 29 (11): 1731-1741, 2004.
• Savage, P. E., Levine, R. B., and Huelsman, C.
• M.,“Hydrothermal processing of biomass”,
• Thermochemical Conversion of Biomass to Liquid
• Fuels and Chemicals, Edited by Mark Crocker,
• The Royal Society of Chemistry, Cambridge,
• UK., 1: 192-220, 2010.
• Qi, Z., Jie, C., Tiejun, W. and Ying, X., “Review
• of biomass pyrolysis oil properties and upgrading research”, Energy Conversion and
• Management, 48 (1): 87-92, 2007.
• Branca, C., Giudicianni, P. and Di Blasi, C., “GCMS
• characterization of liquid generated from lowtemperature
• pyrolysis of wood”, Industrial &
• Engineering Chemistry Research, 42 (14):
• -3202, 2003.
• Ingemarsson, A., Nilsson, U., Nilsson, M.,
• Pedersen, J. R. and Olsson, J. O., “Slow pyrolysis
• of spruce and pine samples studied with GC/MS
• and GC/FTIR/FID”, Chemosphere, 36 (14):
• -2889, 1998.
• Zeitsch, K. J. “Applications of Furfural”, The
• chemistry and technology of furfural and its many
• by-products, Elsevier publication, Netherlands,
• -103, 2000.
• Lu, Q., Wang, Z., Dong, C., Zhang, Z., Zhang, Y.,
• Yang, Y. and Zhu, X., “Selective fast pyrolysis of
• biomass impregnated with ZnCl2: Furfural
• production together with acetic acid and activated
• carbon as by-products”, Journal of Analytical
• and Applied Pyrolysis, 91 (1): 273-279, 2011.
• Colombini, M. P., Orlandi, M., Modugno, F.,
• Tolppa, E.-L., Sardelli, M., Zoia, L. and Crestini,
• C., “Archaeological wood characterisation by
• PY/GC/MS, GC/MS, NMR and GPC techniques”,
• Microchemical Journal, 85 (1): 164-173, 2007.
• Özbay, G., “Odun ve Odun Esaslı Kompozit
• Malzeme Talaşlarının Termal ve Katalitik Piroliz
• Yöntemi ile Sıvılaştırılması”, Doktora Tezi,
• Karabük Üniversitesi Fen Bilimleri Enstitüsü,
• Karabük, 89-95, 2012.
• López, D., Acelas, N. and Mondragón, F.,
• “Average structural analysis of tar obtained from
• pyrolysis of wood”, Bioresource Technology,
• (7): 2458-2465, 2010.