___

• Tönshoff, H.K., Hillmann-Apmann, H., Asche, J.,
• “Diamond Tools in Stone and Civil Engineering
• Industry: Cutting Principles, Wear and Applications”,
• Diamond and Related Materials, 11, 736-741, 2002.
• Büyüksağış, İ.S., Atıcı, Ü. Ersoy, A.
• “Travertenlerde Tabaka Yönünün Kesme Verimi
• Üzerine Etkileri”, Türkiye IV. Mermer
• Sempozyumu (MERSEM’2003) Bildiriler
• Kitabı, 189-199, 18-19 Aralık 2003.
• Konstanty, J., ”Theoretical Analysis of Stone
• Sawing with Diamonds”, J. of Materials
• processing Tech., Vol 123, 146-154, 2002.
• Konstanty, J., “Powder Metallurgy Diamond Tools –
• A Review of Manufacturing Routes”, Materials
• Science Forum, Vol 534-536, 1121-1124, 2007.
• Ucun, İ., Çolakoğlu, M., Taşgetiren, S., “Stress Analysis
• of Marble Sawing Disc in Cutting Process”, Journal of
• Applied Sciences, Vol 8, No 5, 876-880, 2008.
• Tönshoff, H.K., Wobker, H.G., Przywara, R.,
• “Das Arbeitsverhalten von Werkzeugen zum
• Trennschleifen von Gestein“, Industrial
• Diamond Related, Vol 3, 12-19, 1993.
• Büyüksağiş, İ.S., Göktan, R.M., “Investigation of
• Marble Machining Performance Using an
• Instrumented Block-Cutter”, J. of Materials
• Processing Technology, Vol 169, 258-262,
• -
• Xu, X., Li, Y., Yu, Y., “Force Ratio in the
• Circular Sawing of Granites with a Diamond
• Segmented Blade”, Journal of Materials
• Processing Tech., Vol 139, 281-285, 2003.
• Xu, X., “Friction Studies on the Process in
• Circular Sawing of Granites”, Tribology Letters,
• Vol 7, 221-227, 1999.
• Luo, S.Y., Liao Y.S., “Effects of Diamond Grain
• Characteristics on Saw Blade Wear”, Int. J.
• Mach. Tools Manufact., Vol 33, No 2, 257-
• ,1993.
• Zhan, Y.J., Li, Y., Huang, H., Xu X.P., “Effects of
• the Wear Characteristics of Brazed Diamond Grits
• on Grinding Forces”, Advanced Materials
• Research, Vol 24-25, 233-238, 2007.
• Yu, Y.Q., Li, Y., Xu, X.P., “An Experimental
• Study of Specific Energy in Grinding Granite”,
• Materials Science Forum, Vol 471-472, 625-629,
• -
• Xu, X.P., Li, Y., “The Effects of Swarf in the
• Diamond Sawing of Granite”, Key Engineering
• Materials, Vol 250, 187-193, 2003.
• Luo, S.Y., Liao, Y.S., “Study of the Behaviour of
• Diamond Saw-Blades in Stone Processing”, J. of
• Materials Processing Tech., Vol 51, 296-308,
• -
• Ersoy, A., Atıcı, U., “Performance Characteristics
• of Circular Diamond Saws in Cutting Different
• Types of Rocks”, Diamond and Related
• Materials, Vol 13, 22-37, 2004.
• Jennings, M., Wright, D., “Guidelines for Sawing
• Stone”, Industrial Diamond Review, Vol 2, 70-
• , 1989.
• Tönshoff, H.K., Denkena, B., Asche, J., Apmann,
• H.H., “Development of a System for the Deep
• Sawing of Granite”, Key Engineering Materials,
• Vol 250, 239-246, 2003.
• Luo, S.Y. “Characteristics of Diamond Sawblade
• Wear in Sawing”, Int. J. Machine Tools
• Manufacturing, Vol 36, No 6, 661-672, 1996.
• Xu, X.P., Li, Y., Zeng, W.Y., Li, L.B.,
• “Quantitative Analysis of the Loads Acting on the
• Abrasive Grits in the Diamond Sawing of
• Granites”, Journal of Materials Processing
• Tech., 129, 50-55, 2002.
• Wang, C.Y., Hu, Y.N., Wang, Z.W., Ding, H.N.,
• “Noise and Vibration of Diamond Sawblade for
• Concrete Dry Cutting”, Key Engineering
• Materials, Vol 291-292, 103-108, 2005.