IPv4’DEN IPv6’YA GEÇİŞ İÇİN AHP MODELİ

Bu çalışmada, Ulusal IPv6 Protokolü Altyapı Tasarımı ve Geçiş Projesi kapsamında, IPv4’ten IPv6’ya geçişteen uygun geçiş stratejisine karar vermede, çok kriterli karar verme metotlarından Analitik Hiyerarşi Proses(AHP) yöntemi geçiş mekanizmasının kararlaştırılmasında kullanılmıştır. Bu çalışmanın bu alanda bir ilkçalışma olması, geçişe etki edecek olan parametrelerin belirlenmesi, kriter kümelerinin konuya özel olarak ilkkez belirlenmesi ve bu probleme uygulanması bu çalışmanın özgün yönleridir. Aynı zamanda, en iyi geçişstratejisinin belirlenmesi için gerekli anketler hazırlanıp uygulanmış; Super Decisions 1.6.0 paket programıkullanılarak uygun geçiş mekanizmalarına ait sonuçlar elde edilmiştir. Sunulan bu çalışmanın, ülke kurum vekuruluşlarının IPv6’ya geçişinde en uygun geçiş mekanizmasının belirlenmesinin, ülke kaynaklarının daha etkinkullanılmasına, konuyla ilgili geçiş süresini kısaltacağına, geçmek isteyen kurumlara bilimsel bir yaklaşımsunmasının ülke geçiş sürecine önemli katkılar sağlayacağı değerlendirilmektedir.

___

  • Saaty, T.L., The Analytic Hierarchy Process.
  • New York, NY: McGraw-Hill; 1980.
  • Saaty, T. L., “That is not the analytic hierarchy
  • process: what the AHP is and what it is not”, J.
  • Multi-Crit Decis. Anal., 6:324–235, 1987.
  • Angels, D.I., Lee, C.Y., “Strategic investment
  • analysis using activity based costing concepts and
  • analytic hierarchy process techniques”,
  • International Journal of Production Research,
  • (5), 1331–1345, 1996.
  • Blair A.R., Nachtmann R., Saaty, T.L., Whitaker,
  • R., “Forecasting the resurgence of the US
  • economy in 2001: An expert judgement
  • approach”, Socio- Economic Planning Sciences,
  • (2), 77–91, 2002.
  • Byun, D.H., “The AHP approach for selecting an
  • automobile purchase model”, Information and
  • Management, 38 (5), 289–297, 2001.
  • Cagno, E., Caron, F., Perego,F., “Multi-criteria
  • assessment of the probability of winning in
  • competitive bidding process”, International
  • Journal of Production Management, 19, 313–
  • , 2001.
  • Arbel,A., .E. Orger, Y.E., “An application of
  • AHP to bank strategic planning: The merger and
  • acquisitions process”, European Journal of
  • Operational Research, 48 (1), 27–37, 1990.
  • Arbel, A., Seidmann, A., “Performance evaluation
  • of FMS, IEEE Transactions on Systems”, Man
  • and Cybernetics, 14 (4), 606–617, 1986.
  • Bitici, U.S., Suwignjo, P., Carrie, A.S., “Strategy
  • management through quantitative modeling of
  • performance measurement system”, International
  • Journal of Production Economics, 69 (1), 15–
  • , 2001.
  • Ahire, S.L., Rana,D.S., “Selection of TQM pilot
  • projects using an MCDM approach”,
  • International Journal of Quality & Reliability
  • Management, 12 (1), 61–81, 1995.
  • Al Harbi, K.M., “Application of AHP in project
  • management”, International Journal of Project
  • Management, 19 (4),19–27, 2001.
  • Alidi, A.S., “Use of analytic hierarchy process to
  • measure the initial viability of industrial projects”,
  • International Journal of Project Management,
  • (4), 205–208, 1996.
  • Al Khalil, M.I., “Selecting the appropriate project
  • delivery method using AHP”, International
  • Journal of Project Management, 20, 469–474,
  • -
  • Akarte, M.M., Surendra, N.V., Ravi, B., Rangaraj,
  • N., “Web based casting supplier evaluation using
  • analytic hierarchy process”, Journal of the
  • Operational Research Society, 52 (5), 511–522,
  • -
  • Andijani, A.A., “A multi-criterion approach to
  • Kanban allocations”, Omega, 26 (4), 483–493,
  • -
  • Andijani, A.A., Anwarul, M., “Manufacturing
  • blocking discipline: A multi-criterion approach for
  • buffer allocations”, International Journal of
  • Production Economics, 51 (3), 155–163, 1997.
  • Badri, M., “Combining the AHP and GP model
  • for quality control systems”, International
  • Journal of Production Economics, 72 (1), 27–
  • , 2001.
  • Ulusal IPv6 Protokolü Altyapı Tasarımı ve Geçiş
  • Projesi, TÜBİTAK-KAMAG 108G100, Dönem 2
  • Raporu, Haziran 2010.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi-Cover
  • ISSN: 1300-1884
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1986
  • Yayıncı: Oğuzhan YILMAZ
Sayıdaki Diğer Makaleler

DÜZENLİ ÜÇGEN VEYA DAİRESEL BOŞLUKLARA SAHİP BETONARME KİRİŞLERİN DAVRANIŞ VE DAYANIMI

Sabahattin AYKAÇ, Mahmut YILMAZ

YARI-KESİKLİ STİREN POLİMERİZASYON REAKTÖRÜNÜN GENETİK ALGORİTMA İLE BULANIK KONTROLU

Ayla ALTINTEN, Seçkin ALTINDAL, Sebahat ERDOĞAN, Hale HAPOĞLU

PEM TİPİ YAKIT PİLLERİ İÇİN ÇİFT KUTUPLU AKIŞ PLAKALARININ MODELLENMESİ

Ahmet EKİZ, Talha CAMCI, İbrahim TÜRKMEN, Mehmet SANKIR, Sıtkı USLU, Derek K. BAKER, Ertan AĞAR

EŞİT GENİŞLİKLİ AYRIKLAŞTIRMA YÖNTEMİNE DAYALI YENİ BİR ÖZELLİK ÇIKARTMA YAKLAŞIMI VE YAPAY SİNİR AĞI KULLANARAK EPİLEPTİK ATAK TESPİTİ

Umut ORHAN, Mahmut HEKİM, Mahmut ÖZER

YAPAY GÖRME SİSTEMLERİ İÇİN GELİŞTİRİLEN GAUSS DAĞILIMI TABANLI YENİ BİR ADAPTİF SİMÜLASYON ALGORİTMASI

Mustafa ÖZDEN, İrfan KARAGÖZ

İKİ EKSENLİ YÜKLENMİŞ VE ORTASINDA ELİPTİK DELİK BULUNAN PLAKANIN DELİK GEOMETRİSİNE VE EĞİMİNE GÖRE GERİLME YOĞUNLUĞU FAKTÖRÜNÜN HESAPLANMASI

Tamer T. ÖZBEN, Nurettin ARSLAN, Mahmut ÖZBAY

ETANOL-BENZİN VE METANOL-BENZİN KARIŞIMLARININ BUJİ İLE ATEŞLEMELİ BİR MOTORUN YANMA PARAMETRELERİNE VE EGZOZ EMİSYONLARINA ETKİSİNİN İNCELENMESİ

Muharrem EYİDOĞAN, Mustafa ÇANAKCI, Ahmet ÖZSEZEN, Ertan ALPTEKİN, Ali TÜRKCAN, İbrahim KILIÇASLAN

DELİK DELME YÖNTEMİYLE KALICI/KALINTI GERİLMELERİN ÖLÇÜLMESİ VE GERİNİM ÖLÇERLERİN KALİBRASYONU

Alpay ÖZER, Yusuf ÖZÇATALBAŞ

IPv4’DEN IPv6’YA GEÇİŞ İÇİN AHP MODELİ

Emel AYDOĞAN, M. Yekta SOYLU, Cevriye GENCER, Suna ÇETİN, Murat SOYSAL, Onur BEKTAŞ, Emre YÜCE, Yusuf ÖZTÜRK, Yavuz GÖKIRMAK, Şeref SAĞIROĞLU

TEK TAŞIYICILI WİMAX (IEEE 802.16-2004) RADYODA TAŞIYICI FREKANS KAYMASINI İZLEME BAŞARIMININ DENEYSEL OLARAK İNCELENMESİ

Mehmet İLKHAN, Ahmet CANBOLAT, Ali ÖZEN