İKİ EKSENLİ YÜKLENMİŞ VE ORTASINDA ELİPTİK DELİK BULUNAN PLAKANIN DELİK GEOMETRİSİNE VE EĞİMİNE GÖRE GERİLME YOĞUNLUĞU FAKTÖRÜNÜN HESAPLANMASI
Sonlu bir plaka da bulunan delik v.b. süreksizlikler gerilme altında iken delik civarında daha fazla gerilmeyığılmasına neden olmaktadır. İki eksenli gerilme durumu için plakadaki farklı gerilme oranlarına göre gerilmeyoğunluğunun değişimi elde edilmiştir. Elips deliğin uzun kenar (2b) ve kısa kenar (2a) uzunluklarına göre plakayüzeyinde meydana gelen gerilme alanı dağılımı gösterilmiştir. Ayrıca, farklı gerilme oranlarında elips deliğin(2a) kenar uzunluğunun plaka genişliğine göre (H) maksimum gerilme değerleri sonlu elamanlar yöntemikullanılarak hesaplanmıştır. Plaka x-eksenine göre, elips deliğin eğimine göre (θ= 00,150, 300, 450 ve 900)plakada meydana gelen gerilme yoğunluğu ve alan değişimi araştırılmıştır.
___
- Griffith, A. A. The Phenomena of Rupture and
- Flow in Solids, Philos. Trans., R. Soco. Lond.,
- Ser. A., Vol. 221, 1920.
- Irwin, G. R., Fracture Dynamics, Fracture of
- Metals, ASM, pp. 147-166, 1948.
- Bouchard, O., Bay, F. ve Chastel, Y., “Numerical
- modelling of crack propagation: automatic
- remeshing and comparison of different criteria”,
- Computational Method Applied Mechanical
- Engineering, 192, 3887–3908, 2003.
- Schuller, T. ve Lauke, B., “Finite-element
- simulation of interfacial crack propagation:
- Methods and tools for the complete failure
- process under large scale yielding”, Engineering
- Fracture Mechanics, 73, 2252–2263, 2006.
- Shah, Q.H., Azram, M. ve Iliyas, M.H.,
- “Predicting the Crack Initiation Fracture
- Toughness for a Crack Along The Bimaterials
- Interface”, Journal of Applied Science, 5, 253-
- , 2005.
- Bouiadjra, B. Benguediab, M. Elmeguenni, M.
- Belhouari, M. Serier, ve Aziz, B. M. N. “Analysis
- of the effect of micro-crack on the plastic strain
- ahead of main crack in aluminium alloy 2024 T3
- B”, Computational Materials Science, 42, 100–
- , 2008.
- Partheepan, G., Sehgal, D.K.ve Pandey, R.K.
- “Fracture toughness evaluation using miniature
- specimen test and neural network”,
- Computational Material Science, 44, 523–530,
- -
- Dirikolu, M. H., Aktas, A., “Analytical and finite
- element comparisons of stress intensity factors of
- composite materials”, Composite Structures, 50,
- -102, 2000.
- Pilkey W.D., Pilkey D.F., Peterson's Stress
- Concentration Factors, 3rd. ed, John Wiley &
- Sons, Inc, New York, 2008.
- Madenci, E. ve Güven, İ., “The finite Elementh
- Method and applications in Engineering Using
- Ansys”, Springer Science-Buisness Media Inc,
- -
- Inglis, C.E., “Stress in a Plate Due to the
- Presence of Cracks and Sharp Corners”,
- Transactions of the Institute of Naval
- Architects, Vol.55, 219-241, 1913.
- Y. S. Nakasone, T.A. Yoshimoto, Stolarski,
- Engineering Analaysis with ANSYS Software,
- Elsevier Publishing, 2006.
- ANSYS User’s Manuel (Version 9.0)