___

• Zhao, H., HCCI and CAI Engines for the
• Automotive Industry, Woodhead Publishing
• Limited, England, 2007.
• Xingcai, L., Yuchun, H., Linlin, Z. ve Zhen H.,
• “Experimental Study on the Auto-ignition and
• Combustion Characteristics in the Homogeneous
• Charge Compression Ignition HCCI Combustion
• Operation with Ethanol/n-heptane Blend Fuels by
• Port Injection”, Fuel, Cilt 85, 2622–2631, 2006.
• Arcoumanis, C., Bae, C., Crookes R. ve
• Kinoshita, E., “The Potential of Di-metyhlether
• (DME) as an Alternative Fuel for Compression-
• Ignition Engines”, A review, Fuel, Cilt 87, 1014-
• , 2008.
• Megaritis, A., Yap, D. ve Wyszynski, M.L.,
• “Effect of Water Blending on Bioethanol HCCI
• Combustion with Forced Induction and Residual
• Gas Trapping”, Energy, Cilt 32, 2396-2400,
• -
• Yap, D., Karlovsky, J., Megaritis, A., Wyszynski,
• M.L. ve Xu, H., “An Investigation into Propane
• Homogeneous Charge Compression Ignition
• (HCCI) Engine Operation with Residual Gas
• Trapping”, Fuel, Cilt 84, 2372–2379, 2005.
• Yoon, B.O., Dynamic Analysis and Optimal
• Design of Over-Head Cam Systems, Ph.D.
• Thesis, Mechanical Engineering, The University
• of Michigan, Michigan, 1993.
• Tsay, D.M. ve Huey, C.O., “Cam Motion
• Synthesis Using Spline Functions”, Journal of
• Mechanisms Transmissions and Automation
• in Design, Cilt 110, 161-165, 1988.
• Tsay, D.M. ve Huey, C.O., “Spline Functions
• Applied to the Synthesis and Analysis of
• Nonrigid Cam-Follower Systems”, Journal of
• Mechanisms Transmissions and Automation
• in Design, Cilt 111, 561-569, 1989.
• Mandal, M. ve Naskar, T.K., “Introduction of
• Control Points in Splines for Synthesis of
• Optimized Cam Motion Program”, Mechanism
• and Machine Theory, Cilt 44, 255-271, 2009.
• Karabulut, H. ve Sarıdemir, S., “Farklı Supap
• Açık Kalma Süreleri ve Kursları İçin Klasik
• Spline Yöntemi İle Elde Edilen Kam Profillerinin
• Karşılaştırılması”, Journal of the Faculty of
• Engineering and Architecture of Gazi
• University, Cilt 24, 509-515, 2009.
• Lanni, C., Ceccarelli, M. ve Figliolini, G., “An
• Analytical Design for Three Circular-Arc Cams”,
• Mechanism and Machine Theory, Cilt 37, 915-
• , 2002.
• Hsieh, J.F., “Design and Analysis of Cams with
• Three Circular-Arc Profiles”, Mechanism and
• Machine Theory, Cilt 45, 955-965, 2010.
• Qiu, H., Lin, J.C., Li, Z.Y., Hiroaki, O., Wang, J.
• ve Yong, Y., “A Universal Optimal Approach to
• Cam Curve Design and Its Applications”,
• Mechanism and Machine Theory, Cilt 40, 669-
• , 2005.
• Mills, J.K., Notash, L. ve Fenton, R.G., “Optimal
• Design and Sensitivity Analysis of Flexible cam
• Mechanisms”, Mechanism and Machine
• Theory, Cilt 28, 563-583, 1993.
• Lampinen, J., “Cam Shape Optimisation by
• Genetic Algorithm”, Computer Aided Design,
• Cilt 35, 727-737, 2003.
• Liang, Z. ve Quinn, C.J., “Accurate Design of a
• Cam Profile on the CAD System”, Journal of
• Manufacturing Systems, Cilt 10, 501-508,
• -
• Erlandsonn, O., “Thermodynamic Simulation
• of HCCI Engine Systems”, Ph.D. Thesis, Lund
• Institute of Technology, 2002.
• He, B.Q., Xie, H., Zhang, Y., Qin, J. ve Zhao, H.,
• “An Experimental Study on HCCI Combustion in
• a Four Stroke Gasoline Engine with Reduced
• Valve Lift Operations”, SAE Paper, 2005-01-
• , 2006.
• Jang, J. ve Bae, C., “Effects of Valve Events on
• the Engine Efficiency in a Homogeneous Charge
• Compression Ignition Engine Fueled by
• Dimethyl Ether”, Fuel, Cilt 88, 1228–1234,
• -
• Zhang, Y., Zhao, H., He, B.Q. ve Xie, H.,
• “Variable-Valve-Actuation-Enabled High-
• Efficiency Gasoline Engine”, Journal of
• Automobile Engineering, Cilt 224, 1081-1095,
• -
• Yeom, K., Jang, J. ve Bae, C., “Homogeneous
• Charge Compression Ignition of LPG and
• Gasoline Using Variable Valve Timing in an
• Engine”, Fuel, Cilt 86, 494-503, 2007.
• Grohe, H., Otto ve Dizel Motorları, Bilim
• Teknik Yayınevi, İstanbul, 180-205, 1999.