___

• Spencer, D.B., Mehrabian, R. and Flemings,
• M.C., “Rheological Behavior of Sn-15 pct Pb in
• the Crystallization Range”, Metallurgical
• Transaction A, 3A:1925-1932 1972.
• Flemings, M.C., Riek R.G. and Young K.P.,
• “Rheocasting”, Materials Science and
• Engineering, 25:103-117 1976.
• Zoqui, E.J., Paes, M., Es-Sadiqi, E., “Macro- and
• microstructure analysis of SSM A356 produced
• by electromagnetic stirring” Journal of
• Materials Processing Technology, 120: 365–
• 2002.
• Tzimas, E., “Evolution of microstructure and
• rheological behavior of alloys in the semi solid
• state”, Ph.D. Thesis, Drexel University, USA,
• -12 1997.
• Kapranos, P., Ward P.J., Atkinson H.V. and
• Kirkwood D.H., “Near net shaping by semi-solid
• metal processing” Materials and Design, 21
• (4): 387-394 2000.
• Li, D. N., Luo, J. R., Wu, S. S., Xiao, Z. H.,
• Mao, Y. W., Song, X. J., Wu, G. Z., “Study on
• the semi-solid rheocasting of magnesium alloy
• by mechanical stirring”, Journal of Materials
• Processing Technology, 129 (1-3): 431-434
• -
• Hirt, G., and Kopp, R., “Semi-solid Metal
• Processing” WILEY-VCH Verlag GmbH &
• Co, Weinheim 2009.
• Czerwinski F. “Semisolid Processing—Origin of
• Magnesium Molding”, Magnesium Injection
• Molding, Springer US, USA, 81-145 2007.
• Abramov, V. O., Abramov, O. V. Abramov, B.
• B. Straumal and W. Gust, “Hypereutectic Al-Si
• based alloys with a thixotropic microstructure
• produced by ultrasonic treatment”, Materials
• and Design, 18: 323-326 1997.
• Taghavi, F., Ghassemi, A., “Study on the effects
• of the length and angle of inclined plate on the
• thixotropic microstructure of A356 aluminum
• alloy”, Materials and Design 30:1762–1767
• -
• Liu, D., Atkinson, H.V., Kapranos, P.,
• Jirattiticharoean W. and Jones, H.,.
• “Microstructural evolution and tensile
• mechanical properties of thixoformed high
• performance aluminium alloys”, Materials
• Science and Engineering A, 361 (1-2): 213-224
• -
• Nafisi, S., Lashkari, O., Ghomashchi, R.,
• Ajersch, F., Charette, A., “Microstructure and
• rheological behavior of grain refined and
• modified semi-solid A356 Al–Si slurries”, Acta
• Materialia, 54: 3503–3511 2006.
• Doutre, D, Hay, G., Wales, P. and Gabathuler,
• J.P. “SEED: A new process por semi solid
• forming”, Canadian Metallurgical Quarterly,
• (2): 265-272, 2004.
• Birol Y., “Internal Cooling to produce
• aluminium alloy slurries for rheocasting”,
• Journal of Alloy and Compounds, 480 (2):
• -368 2009.
• Birol Y., “Production of Al-7Si-0.3Mg slurry for
• rheocasting via internal cooling of the melt
• below liquidus temperature”, Metallic
• Materials, 47 (9): 401-407 2009.
• Martinez, R.A. and Flemings, M.C., “Evolution
• of particle morphology in the semisolid
• processing”, Metallurgical and Materials
• Transactions A, 36 (8): 2205-2210 2005.
• Atkinson, H.V., Liu, D., “Microstructural
• coarsening of semi-solid aluminium alloys”,
• Materials Science and Engineering A, 496 (1-
• :439-446 2008.
• Young, K.P., Curtis, P.K. and James,.C., “Fine
• Grained Metal Composition”, United States
• Patent, Patent No: 4415374, USA 1983.
• Sirong, Y., Dongcheng, L., Kim, N.,
• “Microstructure evolution of SIMA processed
• AA2024”, Materials Science and Engineering
• A, 420 (1-2):165-170 2006.
• Choi, J. C., Park, H. J. “Microstructural
• characteristics of aluminum 2024 by cold
• working in the SIMA process.” Journal of Materials Processing Technology, 82: 107–116
• -
• Kopp, R., Winning G. and Möller T.,
• “Thixoforging of aluminium alloys” METEC,
• Düsseldorf 1999.
• Jung, H.K. Kang C.G. “Reheating process of
• cast and wrought aluminum alloys for
• thixoforging and their globularization
• mechanism”, Journal of Materials Processing
• Technology, 104: 244-253 2000.
• Guo, H., Yang, X.,” Preparation of semi-solid
• slurry containing fine and globular particles for
• wrought aluminum alloy 2024” Trans.
• Nonferrous Met. Soc. China 17: 799-804 2007.
• Akar, N., Mutlu, I., “Effect of Predeformation
• Rate in SIMA Process on Thixotropic Structure
• of AA2024 Aluminium Alloy”, Journal of The
• Faculty of Engineering and Architecture of
• Gazi University, 25(4): 663-670 2010.
• Chayong, S., Atkinson, H.V. and Kapranos, P.,
• “Multistep induction heating regimes for
• thixoforming 7075 aluminium alloy”, Materials
• Science and Technology, 20 (4): 490-496 2004.
• Figueredo, A., “Science and technology of semisolid
• metal processing” North America Die
• Casting Associtation, USA, 1-17, 2001.
• Tzimas, E. and Zavaliangos, A., “Evaluation of
• volume fraction of solid in alloys formed by
• semisolid processing”, Journal of Materials
• Science, 35 (21): 5319-5329 2000.
• Zoqui E.J. “Morphological analysis of SSM Al–
• 5 wt.% Cu measured by the rheocast quality
• index”, Journal of Materials Processing
• Technology, 143–144: 195–201 2003.
• Jiang, H., Lu, Y., Huang, W., Li, X., Li, M.,
• “Microstructural evolution and mechanical
• properties of the semisolid Al–4Cu–Mg alloy”,
• Materials Characterization, 51: 1– 10 2003.
• Jiang, H., Li, M., “Microscopic observation of
• cold-deformed Al–4Cu–Mg alloy samples after
• semi-solid heat treatments”, Materials
• Characterization, 54: 451– 457 2005.
• Jiang, H. and Li, M., “Grain growth of Al-4Cu-
• Mg alloy during isothermal heat treatment”,
• Journal of University of Science and
• Technology Beijing, 13(1): 67-72 2006.
• Jiang, H., Mi, Z., Tang, D., and Li, M.,
• “Microstructure evolution of Al-4Cu-Mg alloy
• during semi-solid treatment”, Journal of
• University of Science and Technology Beijing,
• (2): 151-156 2007.
• Wang, S., Li, Y., Chen, W., Zheng, X.,
• “Microstructure evolution of semi-solid 2024
• alloy during two-step reheating process”,
• Transactions of Nonferrous Metals Society of
• China, 18 (4): 784-788 2008.
• Atkinson, H.V., Kapranos, P., Liu, D., Chayong
• S.A. and Kirkwood D.H. Thixoforming of
• normally wrought aluminium alloys”, Materials
• Science Forum, 396-402 (3): 131-136 2002.
• Atkinson, H.V., “Modelling the semisolid
• processing of metallic alloys”, Progress in
• Materials Science, 50 (3): 341-412 2005.
• Fan, Z., “Semisolid metal processing”
• International Materials Reviews, 47(2): 49-85
• -
• Zhang, L., Liu, Y.B., Cao, Z.Y., Zhang, Y.F.,
• Zhang, Q.Q. “Effects of isothermal process
• parameters on the microstructure of semisolid
• AZ91D alloy produced by SIMA”, Journal of
• Materials Processing Technology, 209: 792–
• 2009.
• Verhoeven, J.D., “Fundamentals of physical
• metallurgy”, John Wiley & Sons Inc., Canada,
• , 200, 347 1975.
• Porter, D.A., and Easterling K.E. “Phase
• transformation in metals and alloys” CRC
• Press, UK, 131 2001.
• Kim, N.S. and Kang, C.G., “An investigation of
• flow characteristics considering the effect of
• viscosity variation in the thixoforming process”,
• Journal of Materials Processing Technology,
• : 237-246 2000.
• Birol, Y., “Thermomechanical processing of
• AA6061 billets for semi-solid forming”,
• International Journal of Materials Research,
• (1): 53-59, (2007).
• Atkinson, H.V., Burke K. and Vaneetveld G.,
• “Recrystallization in the semi-solid state in 7075
• aluminium alloy”, Materials Science and
• Engineering A, 490 : 266-276 2008.
• Önsel, M., “The influence of heating conditions
• on semi-solid forming of aluminum alloys”,
• Yüksek Lisans Tezi, Boğaziçi Üniversitesi Fen
• Bilimleri Enstitüsü, İstanbul, 90 2005.