Türkiye' de ve Avrupa' da prefabrike beton bileşenler ile yapı üretiminde gözlenen değişimler

Bu çalışmada, 1990'lı yıllarda Türkiye'de ve Avrupa'da prefabrike beton bileşenler ile yapı üretiminde gözlenen değişimler incelenmiştir. Bu çalışmada Türkiye'de; 1994-2000 yılları arasında, üretilen üstyapı ürün türlerinde (duvar-döşeme panelleri, kolonlar, kirişler, çatı makasları vb.) değişiklik olmadığı ve bu ürünlerin daha çok özel sektör tarafından talep edildiği görülmüştür. Yıllık üstyapı bileşenleri üretiminin ve prefabrike beton bileşenler ile yapı üretiminin, toplam yapı üretimi içindeki payının 1994-1997 yılları arasında arttığı, 1997-2000 yıllan arasında ise düştüğü gözlemlenmiştir. 1997-2000 yılları arasında, Türkiye'de pazar payında en önemli düşüşlerin olduğu bölgenin Marmara Bölgesi olduğu, saptanmıştır. Avrupa'nın değişik bölgelerinden yirmi iki ülkenin incelenmesi sonucunda ise, bu ülkelerin kişi başına düşen üstyapı bileşenleri üretim değerlerinin ortalamasında 1990-1998 yıllan arasında sürekli bir düşüşün olduğu görülmüştür. Aynı düşüş prefabrike beton bileşenler ile yapı üretiminin toplam yapı üretimi içindeki payında ise görülmemiştir.

Observed changes on building production by prefabricated concrete components: In Turkey and Europe

In this study, the changes in building production by prefabricated concrete components in Turkey and Europe in the 1990's were examined. This study reveals that there have not been any changes in the superstructure element types (wall-floor panels, columns, beams, trusses, etc.) produced in Turkey between 1994-2000 and these elements have been demanded especially by the private sector. It has been observed that the annual shares of superstructure components' production and building production with prefabricated concrete elements in thetotal building production increased between 1994-1997 but decreased between 1997-2000. The most significant decrease was recorded in the Marmara region market share between 1997-2000 in Turkey. According to the investigation among the twenty two countries in different regions in Europe, the average superstructure components' production per person continuously decreased between 1990-1998. However, a similar decrease in the building production with the prefabricated concrete components in the total building production has not been observed.

___

  • 1.Anon., "Prefabrikasyon sektör raporları", Türkiye Prefabrik Birliği, Ankara (1991-2000).
  • 2.Anon., "İnşaat istatistikleri", T.C. Devlet İstatistik Enstitüsü, Ankara (1990-2000).
  • 3.Tezcan, S., "Precast concrete industry in Turkey", 15. International Congress of the Precast Concrete Industry Proceedings- Organized by BIBM, Paris, 59-67 (1996).
  • 4.Anon., "Bulletin of housing and building statistics for europe and North America", United Nations Economic Commision for Europe, Geneva (2000).
  • 5.Anon., Çeviri: Tokman, B., "Fransa'da prekast beton sanayii", Beton Prefabrikasyon, 41, 12-13 (1997).
  • 6.Alcantara, P.P., "Trends of prefabrication in the Philippines", The 4. International Symposium on Noteworthy Developments in Prestressing & Precasting, Singapore, 20-27 (1997).
  • 7. Elliott, K.S., "The european research effect on the stability of precast concrete structures", The 4. International Symposium on Noteworthy Developments in Prestressing & Precasting, Singapore, 69-77 (1997).
  • 8. Tezcan, S., "Türk prefabrikasyon sektörünün teknolojik açıdan 1991'deki durumu", Yapı, 125, 41-49 (1992).
  • 9. Scott, N. L., "Precast prestressed concrete beyond year 2000 in the United States", Betonwerk + Fertigteil-Technik, 7: 46-58 (1994).
  • 10. Leong, T.W., "Precast concrete in private and public sector housing in Singapore", The 4. International Symposium on Noteworthy Developments in Prestressing & Precasting, Singapore, 104-110 (1997).
Gazi Üniversitesi Fen Bilimleri Dergisi-Cover
  • ISSN: 1303-9709
  • Yayın Aralığı: Yıllık
  • Yayıncı: -
Sayıdaki Diğer Makaleler

Kimyasal bileşim ve soğuma hızının arayer atomu içermeyen mikroalaşım çeliklerinin mekanik özelliklerine etkisi

Süleyman GÜNDÜZ

$C_7H_8Br_4$ molekülünün konformasyon analizi ve kuantum mekanik yöntemle optimizasyonu, elde edilen elektronik ve yapısal parametrelerin X- ışınları yapı analiz sonuçları ile karşılaştırılması

Ahmet TUTAR, Semra İDE, İsmail ÇELİK, Mehmet AKKURT, Osman ÇAKMAK

Adsorption of Ni and its interaction with CsCI molecules on the graphite monolayer of iridium

Şemsettin ALTINDAL, Adem TATAROĞLU, Arif AGASİEV, Nazim NASRULLAYEV, Tofik ABDULLAYEV

Lamine ahşapta katman teşekkülünün mekanik performansa etkilerinin belirlenmesi

Mustafa ALTINOK

İyonomerik aljinik asit membranların sodyum klorür, üre, kreatinin geçirgenlikleri

Oya ŞANLI, Gülsen ASMAN

Determination of mechanical properties of pultruded GRP box section using a "short" tensile coupon

Mehmet SARIBIYIK, Naci ÇAĞLAR

Kalıp preste biçimlendirilmiş ve kaplanmış yonga levhanın (Werzalit) sıcak su buharı etkisinde davranış özellikleri

İhsan KÜRELİ, Kemal YILDIRIM, Cevdet SÖĞÜTLÜ

On the sensitivity of two-point boundary value problem for the system of linear ordinary differential equations with constant coefficients

H. Hüseyin SAYAN

Elektro ve sıcak daldırma metodlarıyla galvaniz kaplanmış çelik sacların paslanmaz çeliğe direnç kaynağı ile kaynaklanabilirliği

Mustafa AYDIN, Behçet GÜLENÇ

On the sensitivity of the two-point boundary value problem for a linear difference equations system

Nurettin DOĞAN