___

• C.K. Sahoo, L. Soni, M. Masanta, Evaluation of microstructure and mechanical properties of TiC/TiC-steel composite coating produced by gas tungsten arc (GTA) coating process, Surface & Coatings Technology 307 (2016) 17–27
• X.J. Wu, J.D. Xing, H.G. Fu, X.H. Zhi, Mater. Sci. Eng. A, 457 (2007), pp. 180-185
• H. Berns, Microstructural and abrasive characteristics of high carbon Fe–Cr–C hardfacing alloy, Wear, 254 (2003), p. 47-54
• J.D. Xing, Y.M. Gao, E.Z. Wang, C.G. Bao, Wear, 252 (2002), p. 755
• R. Veinthal, F. Sergejev, A. Zikin, R. Tarbe, J. Hornung, Abrasive impact wear and surface fatigue wear behaviour of Fe–Cr–C PTA overlays, Wear, 301, 1–2, (2013), pp. 102-108
• C. Fan, M.C. Chen, C.M. Chang, W. Wu, Surf. Coat. Technol., 201 (2006), p. 908
• L. Lu, H. Soda, A. McLean, Materials Science and Engineering A, 347 (2003), pp. 214-222
• J. Xu, Y.D. Kan, W.J. Liu, In-situ synthetic TiB2 particulate reinforced metal matrix composite coating on AA2024 aluminum alloy by laser cladding technology, Surf. Rev. Lett, 12 (2005), 561-567
• X. Xu, G. Mi, L. X., P. Jiang, X. Shao, C. Wang, Morphologies, microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire, Journal of Alloys and Compounds, 740 (2018), pp. 16-27
• G. Rasool, M.M. Stack, Wear maps for TiC composite based coatings deposited on 303 stainless steel, Tribol. Int., 74 (2014), 93-102
• Z. Wang, X. Zhou, G. Zhao, Microstructure and formation mechanism of in-situ TiC-TiB2/Fe composite coating, Transactions of Nonferrous Metals Society of China, 18, 4 (2008), pp. 831-835
• A. Monfared, A.H. Kokabi, S. Asgari, Microstructural studies and wear assessments of Ti/TiC surface composite coatings on commercial pure Ti produced by titanium cored wires and TIG process, Mater. Chem. Phys., 137 (2013), pp.959-966
• S. Mridha, Titanium nitride layer formation by TIG surface melting in a reactive environment, J. Mater. Proc. Technol., 168 (2005), pp.471-477
• M. Zhang, M. L. Jing, C. S. Wang, L. Ren, Min Fang, Microstructure and tribology properties of in-situ MC(M:Ti,Nb) coatings prepared via PTA technology, Vacuum, Volume 160, February 2019, pp. 264-271
• X.-N. Wang, et al., Formation mechanism of δ-ferrite and metallurgy reaction in molten pool during press-hardened steel laser welding. Materials Letters, 206 (2017), pp. 143-145
• C.-M. Chang, L.-H. Chen, C.-M. Lin, J.-H. Chen, C.-M. Fan, W.Wu, Microstructure and wear characteristics of hypereutectic Fe–Cr–C cladding with various carbon contents, Surface and Coatings Technology, 205, 2 (2010), pp. 245-250
• A. Leško, E. Navara, Microstructural characterization of high-carbon ferrochromium, Mater. Charact., 36 (1996), pp. 349-356
• C.-M. Chang, Y.-C. Chen, W. Wu, Microstructural and abrasive characteristics of high carbon Fe–Cr–C hardfacing alloy, Tribology International, 43, 5–6 (2010), pp.929-934
• S. Chatterjee , TK Pal, Wear behaviour of hardfacing deposits on cast iron, Wear 255 (2003) 417-425
• S. Liu, Y. Zhou, X. Xing, J. Wang, Y. Yang, Q. Yang, Agglomeration model of (Fe,Cr)7C3 carbide in hypereutectic Fe-Cr-C alloy, Materials Letters, 183 (2016), pp. 272-276
• C.-M. Chang, L.-H. Chen, C.-M. Lin, J.-H. Chen, W. Wu, Microstructure and wear characteristics of hypereutectic Fe–Cr–C cladding with various carbon contents, Surface and Coatings Technology, 205, 2 (2010), pp.245-250
• S. Ma, J. Xing, Y. He, Y. Li, Z. Huang, G. Liu, Q. Geng, Microstructure and crystallography of M7C3 carbide in chromium cast iron, Materials Chemistry and Physics, 161, (2015), pp. 65-73
• J. Yang, J. Tian, F. Hao, T. Dan, X. Ren, Y. Yang, Q. Yang, Microstructure and wear resistance of the hypereutectic Fe–Cr–C alloy hardfacing metals with different La2O3 additives, Applied Surface Science, 289 (2014), pp.437-444
• Y. Wang, J. Gou, R. Chu, D. Zhen, S. Liu, The effect of nano-additives containing rare earth oxides on sliding wear behavior of high chromium cast iron hardfacing alloys, Tribology International, 103, (2016), pp. 102-112
• J. Hornung, A. Zikin, K. Pichelbauer, M. Kalin, M. Kirchgaßner, Influence of cooling speed on the microstructure and wear behaviour of hypereutectic Fe–Cr–C hardfacings, Materials Science and Engineering: A, 576 (2013), pp. 243-251
• Q. Li, Y. Lei, H. Fu, Growth Characteristics and Reinforcing Behavior of In-situ NbCp in Laser Cladded Fe-based Composite Coating, Journal of Materials Science & Technology, 31, 7 (2015), pp. 766-772
• Y F Zhou, Y L Yang, J Yang, P F Zhang, Wear resistance of hypereutectic Fe–Cr–C hardfacing coatings with in situ formed TiC, Surface Engineering, 29, (2013), 5
• X. Zhi, J. Xing, H. Fu, Y. Gao, Effect of titanium on the as-cast microstructure of hypereutectic high chromium cast iron, Mater. Charact., 59 (2008), pp. 1221-1226
• C.M. Lin, H.H. Lai, J.C. Kuo, W. Wu, Effect of carbon content on solidification behaviors and morphological characteristics of the constituent phases in Cr-Fe-C alloys, Mater. Charact., 62 (2011), pp. 1124-1133